Jb256dm4bb Parts

This main top is the cooktop surface that supports burners and cookware, restoring a flat, stable surface for safe cooking and easy cleanup. It replaces damaged, warped, or rusted tops to improve burner alignment and appliance appearance. What it does:

• Provides the flat surface that holds burners, grates, and cookware in correct position
• Protects internal components from spills, grease, and debris
• Restores proper burner alignment and spacing for even heating
• Improves appearance by replacing scratched, dented, or corroded tops

• Disconnect power to the range; shut off gas supply before servicing gas ranges
• Handle the top carefully to avoid cuts or damage; use two people for heavy or awkward tops
• Remove burner grates, knobs, and any retaining screws or clips per your model's service instructions
• Reinstall all removed components and test burners for proper operation after replacement

This is a replacement screw used to secure appliance panels and small components. It restores proper fastening and helps eliminate loose parts, rattling, or misaligned panels for a tight, safe fit. What it does:

• Secures panels, trim, brackets, or small assemblies to restore proper alignment
• Stops rattling or vibration caused by missing or loose fasteners
• Provides the correct threaded fastening where the original screw is lost or damaged
• Matches OEM fastening function for reliable reassembly

• Disconnect power or unplug the appliance before starting any repair
• Use the correct screwdriver or driver bit to avoid stripping the head
• Thread the screw in by hand first, then tighten snugly—do not overtighten to avoid stripping or cracking
• Keep small parts away from children and pets during installation

This painted screw head is a cosmetic and protective cap that restores the finished look where a visible screw is used. It covers the screw head and helps match surrounding black trim for a clean appearance. What it does:

• Covers and conceals a screw head to improve appearance of panels, trim, or bezels
• Helps protect the screw head from direct exposure and reduces visible wear
• Used when trim or panels show exposed or mismatched screw heads
• Common fix when screw heads are scratched, discolored, or visually distracting

• Use the matching screw and press or snap the cap into place over the screw head
• Disconnect power and remove any panels only as recommended by your appliance manual before working near electrical components
• Avoid forcing or prying the cap; if tight, gently ease it on to prevent breakage
• Replace any damaged caps with the exact part to maintain fit and finish

This is a right-side guide support that secures and aligns a sliding component so drawers or shelves operate smoothly and stay on track. Replaces a worn or broken guide support to restore proper movement and seating. What it does:

• Holds the right-side guide rail or track in place so the drawer or shelf slides evenly
• Prevents the drawer or shelf from sagging, binding, or falling off the track
• Restores proper alignment when the original guide is cracked, broken, or worn
• Works with the existing rail, clips, and mounting hardware to maintain smooth travel

• Disconnect power or unplug the appliance before accessing internal components
• Access may require removing the drawer, shelf, or front panel—use basic hand tools
• Inspect related clips, rails, and fasteners and replace any damaged pieces for best results

This bracket base is a replacement support bracket that secures and stabilizes appliance components, helping restore proper alignment and reduce movement. Use it to replace a cracked, bent, or missing base bracket for safe, stable operation. What it does:

• Provides a sturdy mounting point to secure panels, assemblies, or controls
• Restores proper alignment when a worn or damaged bracket allows shifting
• Helps eliminate vibration or rattling caused by loose support hardware
• Prevents further wear by re-establishing correct component positioning

• One bracket base

• Disconnect power to the appliance before beginning any repair
• Verify orientation and fastener locations against the appliance diagram before removal
• Use the correct size screwdriver or socket to avoid stripping fasteners
• Handle edges carefully and wear gloves; replace any damaged fasteners or clips

The Oven Door Hinge is an OEM part for GE ranges. It is responsible for securely yet smoothly opening and closing the oven door. The hinge plays a crucial role in the operation and functionality of the oven by ensuring the door moves freely while remaining tightly sealed when closed.

Causes of a bad door hinge include wear and tear over time, repeated opening and closing of the door putting stress on the hinge mechanism, or accidental damage.

Symptoms of a bad door hinge include:

• The door not opening or closing fully
• Difficulty in moving or swinging the door
• Loss of the secure seal when closed causing heat leakage
• Excessive movement, wobbling, or noise from the door

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This replacement white door handle restores a firm grip and original appearance to compatible appliances. It's a direct-fit exterior handle designed to replace cracked, broken or faded handles so doors open and close normally. What it does

• Replaces damaged or discolored exterior door handle to restore function and appearance
• Provides a secure grip for opening and closing the appliance door
• Fits the factory mounting points for a clean, factory-like finish
• Helps eliminate rattling or loose-handle symptoms caused by worn or broken handles

• One white replacement handle

• Remove any trim or covers and fasteners holding the old handle; retain or replace screws as needed
• Align handle with factory mounting holes and secure with the original or supplied fasteners
• No electrical disconnection is typically required, but unplug the appliance or shut off power for access if working near controls
• Use proper hand protection to avoid sharp edges during removal and installation

This terminal block assembly provides a secure, insulated connection point where the appliance's incoming power leads join the internal wiring harness. Replacing a damaged or heat-worn block restores reliable power flow and helps prevent overheating at the connection. What it does:

• Connects incoming line, neutral, and ground conductors to the internal wiring
• Provides an insulated barrier to prevent shorts at the power-entry point
• Helps resolve no power or intermittent power issues
• Addresses visible heat damage, melted terminals, or burning odor at the cord connection

• 1 terminal block assembly

• Disconnect power at the breaker or unplug the appliance before servicing
• Photograph existing wiring and transfer one wire at a time to maintain correct positions
• Tighten terminals securely; replace any overheated ring lugs or damaged wiring
• Ensure no bare copper is exposed and reinstall any covers or shields before restoring power

This replacement leveling leg threads into the base of your range to stabilize the cabinet and adjust height. Replacing a damaged or missing foot stops rocking and restores a level, safe installation. What it does:

• Threads into the base to support the appliance and provide leveling adjustment
• Helps correct wobble, rocking, or uneven gaps when the unit is out of level
• Helps maintain proper door alignment and safe anti-tip engagement when adjusted correctly
• Replaces leveling feet that are broken, stripped, or missing

• One leveling leg

• Disconnect power; for gas ranges, also shut off the gas supply
• Protect flooring; carefully tilt or raise the appliance to access the leg
• Unthread the old leg; hand-thread the new leg and adjust until level front-to-back and side-to-side
• For freestanding ranges, the anti-tip bracket is fully engaged before use

This anti-tip bracket assembly helps secure a freestanding range to the floor or wall to reduce the risk of the appliance tipping forward. It provides a simple, permanent mounting point to improve stability and user safety. What it does:

• Secures the range's rear/base to the floor or wall to help prevent forward tipping
• Reduces risk of the range sliding or shifting when doors or drawers are opened
• Addresses symptoms like an appliance that tilts or feels unstable when weight is applied to the door
• Required safety hardware for proper installation after moving or servicing a range

• Turn off power (and gas if applicable) and disconnect the appliance before moving it to access the mounting location
• Slide the range forward carefully to access the installation area; use safe lifting practices or have an assistant
• Fasten bracket to floor or wall per the appliance's installation instructions and local codes using appropriate hardware
• Verify the range is seated onto the bracket and check stability before returning the appliance to normal use

The Black Handle and Endcap is an OEM part for GE ranges. It includes both the oven door handle as well as the decorative endcaps on either side. Providing a sophisticated look, these parts play an important aesthetic role.

The handle and endcaps are responsible for a sleek modern style. Made from durable black materials, they can resist everyday wear without showing fingerprints or other marks as easily as lighter tones.

Symptoms of a bad handle and endcaps include:

• Cracked, chipped or broken surfaces
• Loose fit that enables dirt/grime behind the endcaps
• Dull, faded or stained appearance

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.