Jb256dm4bb Parts

This hinge pin links the oven door hinge to its mounting point, creating the pivot that lets the door open and close smoothly. Replacing a worn or missing pin can restore steady door movement and a consistent seal.

• Serves as the pivot point for the door hinge
• Helps maintain proper door alignment and closing pressure
• Wear or damage may show as a loose, sagging, or misaligned door
• May help address squeaks, binding, or difficulty latching the door

• Disconnect power; for gas ranges, also shut off the gas supply
• Support or remove the door to access the hinge
• Note hinge orientation; remove the old pin and install the new pin securely
• Inspect the hinge/bracket for wear; lubricate only if specified by the manufacturer

The trim post left is an OEM part for GE ranges. It is located on the left side of the range and provides structural support to the range cabinet and door glass. The trim post helps brace the sides of the glass door to prevent flexing and bowing over time. Without proper support from a sturdy trim post, the door glass could warp or crack under its weight. 

Causes of a bad trim post can include cracks or damage reducing its ability to reinforce the glass.

Symptoms of a bad trim post include:

• Visible cracking or bending of the door glass
• Looseness, movement, or inability to securely mount the post  
• Warping or flexing of the glass door 

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This insulation panel helps contain oven heat where cooking occurs and reduces heat transfer to the cabinet. It supports stable oven performance and safer exterior temperatures during operation. What it does:

• Provides thermal barrier between the oven cavity and outer cabinet
• Helps reduce heat loss for more consistent cooking temperatures
• Can prevent excessive exterior heating that may cause nearby component stress
• Can be replaced when insulation is damaged, deteriorated, or missing

• Disconnect power (and gas if applicable) before beginning any repair
• Allow the oven to cool completely and wear gloves; insulation fibers can irritate skin
• Replacement typically requires removing oven door/panels to access cavity; follow OEM service instructions
• Secure insulation so it does not contact heating elements or obstruct vents

This end support secures and aligns the dryer drum so it turns smoothly and reduces wear. It replaces a worn or broken support to restore proper drum rotation and quiet operation. What it does:

• Supports the drum edge and maintains proper drum alignment during rotation
• Helps reduce rubbing, scraping, wobble, and abnormal noise from a loose drum
• Prevents uneven wear on the drum and neighboring components
• Works with rollers/bearings and rear support to keep the drum turning smoothly

• Disconnect power (and gas supply if applicable) before beginning any repairs
• Access typically requires removal of the dryer front or bulkhead; follow your model-specific service manual
• Inspect adjacent rollers, bearings, and mounting hardware; replace any worn parts to prevent repeat failures
• Use hand tools and avoid forcing components; secure fasteners to OEM torque specs when available

This end support holds and aligns the dryer drum shaft, helping the drum spin smoothly and quietly. Replace a worn end support to reduce squeaks, wobbling, or drum misalignment for safer, more reliable operation. What it does:

• Supports the drum shaft at the rear of the dryer to keep the drum centered and rotating evenly
• Maintains proper drum-to-drum seal and clearance to prevent rubbing and excess wear
• Helps reduce noise and vibration caused by a loose or damaged rear support
• Works with the drum bearing/shaft assembly to preserve smooth drum rotation

• One end support

• Disconnect power before starting work to avoid electrical shock
• Inspect surrounding drum bearings, rollers, and seals; replace any worn components for best results
• Moderate mechanical skill required; follow OEM disassembly steps and torque recommendations
• Use proper alignment during reassembly to prevent premature wear

This right-side trim post secures and finishes the edge of the appliance's trim assembly, restoring a flush, stable fit and improving the appearance of the unit. It replaces damaged or missing right-side trim support. What it does

• Provides structural support for the right edge of the trim/face assembly
• Holds trim in alignment to prevent gaps or rubbing against adjacent panels
• Restores a finished appearance when the original post is cracked, broken, or missing
• Helps reduce vibration or rattling caused by loose trim

• Disconnect power to the appliance before beginning any work
• Remove surrounding trim or panels as required to access the post; keep fasteners organized
• Inspect adjacent clips and screws and replace if worn to ensure a secure fit

This back cabinet cover replaces the lower rear outer panel that protects internal components and helps keep the appliance stable and secure. Restores proper enclosure and helps reduce debris entry and incidental noise. What it does:

• Covers and protects motors, wiring, and components at the appliance's rear
• Helps prevent dust, lint, and small objects from entering internal areas
• Restores proper airflow routing and reduces rattles caused by a missing or damaged panel
• Improves appliance appearance by replacing cracked, bent, or broken rear trim

• Disconnect power before servicing to avoid electrical shock
• Remove access screws or fasteners securing the old panel; retain hardware if reusable
• Handle the cover carefully to avoid bending or damaging mounting tabs

This wiring divider secures and separates appliance wiring harnesses to keep wires routed away from moving parts and sharp edges, reducing the chance of chafing and intermittent electrical problems while simplifying service access. What it does:

• Holds and separates wiring bundles to prevent rubbing, pinching, or contact with hot or moving components
• Helps maintain reliable electrical connections by keeping wires organized and strain-relieved
• Reduces risk of shorts or intermittent faults caused by damaged insulation
• Makes panel removal and reassembly neater and faster for servicing

• Disconnect power to the appliance before starting any work
• Remove the appropriate access panel to reach the wiring harness routing area
• Position the divider to guide the harness away from edges or moving parts; secure harness in the divider slot or clip as shown in OEM diagrams
• Inspect nearby wiring and connectors for damage; replace any frayed or compromised wires before restoring power

Color: Bisque