Jbs360rn1ss Parts

This is a replacement vent tube designed to route exhaust air and restore proper ventilation in the appliance. Replacing a damaged or clogged vent tube helps maintain airflow and reduces the risk of moisture buildup or heat retention. What it does:

• Channels exhaust or vented air away from the appliance to maintain proper airflow
• Helps prevent moisture buildup and related odors when ventilation is impaired
• Can reduce overheating or performance issues caused by restricted venting
• Restores a secure path for airflow when the original tube is cracked, collapsed, or disconnected

• Disconnect power to the appliance before beginning work; for gas appliances, turn off the gas supply.
• Use basic hand tools and avoid sharp edges on sheet-metal near the vent opening.
• Ensure all connections are seated and sealed per the appliance diagram to prevent air leaks.

This is a 10-32 hex-washer-head screw used to securely fasten appliance panels and components. It replaces worn or missing mounting screws so parts stay tight and appliance panels stop rattling or shifting. What it does:

• Fastens panels, brackets and trim to keep components stable
• Replaces stripped, missing or corroded mounting screws
• Helps stop vibration noise caused by loose parts
• Matches standard 10-32 machine-thread fittings for a secure hold

• Disconnect power to the appliance before servicing
• Use the correct 10-32 screwdriver or nut driver to avoid stripping the head
• Tighten securely but do not overtighten; excessive torque can strip threads or crack plastic
• If threads are damaged, replace with a new screw—do not force a damaged fastener

A welded door liner assembly that replaces a damaged or dented inner door shell to restore proper sealing and appearance. Designed as a direct-replacement inner surface for affected appliance doors. What it does

• Replaces a cracked, dented, or otherwise damaged inner door liner that can allow drafts or interfere with proper door closure.
• Restores the door's interior surface so gaskets and inner components mount correctly.
• Helps eliminate cold or heat leaks caused by a compromised liner.
• Improves door appearance and prevents further damage to internal door parts.

• Disconnect power and follow OEM service manual instructions before starting work.
• Use safe handling practices — edges may be sharp and assembly can be heavy; use gloves and eye protection.
• May require removing door panels, trim, and hardware; retain mounting screws and check gasket seating during reassembly.

This vent trim is a replacement trim piece that restores the finished edge around the appliance exhaust opening and helps direct airflow while improving appearance. Use it to replace dented, cracked, or missing trim for a clean fit. What it does:

• Covers and finishes the exhaust opening, preventing visible gaps and improving appliance appearance
• Helps guide and direct airflow from the vent outlet
• Protects internal components from large debris and keeps the vent area tidy
• Common symptom: trim is cracked, bent, loose, or missing and exposes the vent opening

• One vent trim piece

• Turn off power to the appliance before starting any work; follow all safety precautions
• May require removing nearby trim or grille panels; retain all fasteners and note their locations
• Handle edges carefully — metal trim can have sharp edges

This panel backer is the interior support piece that helps secure and align the appliance control panel, protecting wiring and switches while keeping the panel stable during use. It restores proper fit and prevents rattling or loose controls. What it does:

• Supports and positions the control/display panel so buttons and switches align correctly
• Protects internal wiring and components behind the control panel
• Reduces panel flexing, vibration noise, and intermittent button contact
• Helps maintain a flush, stable control surface for reliable operation

• Disconnect power before starting — follow appliance-specific safety steps
• Remove the outer control/display panel to access and replace the backer
• Transfer any buttons, clips, or switches from the old backer to the new part as needed
• Inspect adjacent wiring and mounting clips; replace any damaged fasteners for a secure fit

This oven top replaces the worn or damaged top surface on compatible ranges to restore a clean, stable cooking area and help maintain proper appliance appearance and operation. What it does:

• Replaces a cracked, dented, or heavily scratched oven top to improve cooktop appearance and surface integrity
• Provides a stable mounting surface for burners, grates, and trim pieces
• Helps prevent heat and spills from reaching internal components under the top
• Can reduce rattles or fitment issues caused by a warped or damaged top

• Disconnect power to the range at the breaker before starting any work
• Remove burners, knobs, grates and any trim as required to access and lift off the old top
• Handle panel edges carefully — metal edges can be sharp
• Verify fit and orientation before final fastener installation; keep all removed hardware for reassembly

This cooktop box houses and protects the cooktop's wiring connections, restoring a safe, code-ready junction point for electrical supply lines. Use this part when the original box is damaged, corroded, or missing fasteners. What it does

• Provides a secure enclosure for cooktop electrical connections and strain relief
• Prevents exposed wiring and reduces risk of shorts or arcing at the connection point
• Restores proper mounting for incoming supply conduit or cable
• Helps correct symptoms like intermittent power, visible damage to the wiring box, or a loose/unstable connection area

• One cooktop junction wiring box

• Disconnect power at the breaker before inspecting or replacing the box
• Replacement typically requires removing the cooktop and transferring wiring into the new box; keep wire routing and grounding intact
• Use only approved screws/fasteners and maintain proper strain relief and grounding per local code

This pin locator secures a hinge or shaft pin in place to keep linked appliance components aligned and operating smoothly. It's a small replacement part that restores proper positioning where a locating clip or retainer is used. What it does

• Holds a hinge, shaft, or pivot pin in place to prevent lateral movement
• Restores proper alignment of doors, panels, or linked components
• Helps stop rattling, misalignment, or binding caused by a worn or missing locator
• Works as a direct replacement for the same OEM-labeled locating clip/retainer

• One pin locator

• High-level replacement; basic hand tools usually required
• Disconnect power (and water, if applicable) before servicing appliances with electrical components
• Keep track of small parts and orientation for correct reassembly

The Main Harness is an OEM part for GE gas ranges. It serves as the primary conductor between range components and control interfaces. 

Symptoms of a bad main harness include:

• Burners resisting adjustment or faulty temperature controls
• Igniters/lights failing to illuminate or heat elements inactive
• Entire range failing to power on or intermittently operating

Causes involve damage from excessive heat, wire insulation degradation over time, or loose terminals compromising connections.

This OEM GE part is also compatible with Hotpoint and RCA gas range models.

The Trim Control is an OEM replacement part for GE electric ranges. As the decorative component surrounding the control panel and knobs, the trim control plays an essential role in the range's overall aesthetic. 

Symptoms of a bad trim control include: 

• Cracks, chips or broken pieces in the trim surface
• Misalignment of the trim pieces 
• Looseness around the control panel or knobs
• Rust or corrosion damaging the appearance

Causes of a bad trim control can be normal wear and tear over time from heat and cleaning chemicals. Repeated impacts or impacts from dropped cookware can also damage the trim.

This genuine GE OEM part is also compatible with Hotpoint, RCA, and select Kenmore ranges.