Jbs360rn1ss Parts

The Trim Control is an OEM replacement part for GE electric ranges. As the decorative component surrounding the control panel and knobs, the trim control plays an essential role in the range's overall aesthetic. 

Symptoms of a bad trim control include: 

• Cracks, chips or broken pieces in the trim surface
• Misalignment of the trim pieces 
• Looseness around the control panel or knobs
• Rust or corrosion damaging the appearance

Causes of a bad trim control can be normal wear and tear over time from heat and cleaning chemicals. Repeated impacts or impacts from dropped cookware can also damage the trim.

This genuine GE OEM part is also compatible with Hotpoint, RCA, and select Kenmore ranges.

This replacement range top restores the flat surface that supports burners and cookware, renewing appearance and providing a stable cooking platform. Fits compatible GE ranges and helps keep the cooktop area sealed and serviceable. What it does:

• Provides the cooktop surface that supports burners, grates, and cookware
• Replaces a warped, dented, corroded, or cosmetically damaged top
• Helps maintain proper alignment of burner assemblies and trim
• Can prevent debris from falling into the range interior around burners

• One range top

• Disconnect power and gas supply before beginning service
• Remove burner grates, burner caps and assemblies as required to access mounting fasteners
• Handle carefully to avoid scratching the finished surface; use two people for larger tops

This hinge pin links the oven door hinge to its mounting point, creating the pivot that lets the door open and close smoothly. Replacing a worn or missing pin can restore steady door movement and a consistent seal.

• Serves as the pivot point for the door hinge
• Helps maintain proper door alignment and closing pressure
• Wear or damage may show as a loose, sagging, or misaligned door
• May help address squeaks, binding, or difficulty latching the door

• Disconnect power; for gas ranges, also shut off the gas supply
• Support or remove the door to access the hinge
• Note hinge orientation; remove the old pin and install the new pin securely
• Inspect the hinge/bracket for wear; lubricate only if specified by the manufacturer

This oven back insulation panel replaces the worn or damaged thermal liner behind the oven cavity to help contain heat and support even cooking. It restores the oven's thermal barrier and helps protect surrounding components from excess heat. What it does:

• Replaces the oven's rear insulation to help maintain proper cavity temperatures
• Helps reduce heat transfer to the exterior cabinet and nearby electronics
• Can improve temperature consistency when insulation is torn, compressed, or missing
• Reduces the chance of heat-related damage to rear components and wiring

• One oven back insulation panel

• Disconnect power at the breaker before starting any repair
• Allow the oven to cool completely; use gloves and a dust mask to avoid irritation from insulation fibers
• Typically accessed by removing the oven back panel; handle gently to avoid compressing or tearing the insulation
• Before reinstalling panels and restoring power

This side door insulation panel installs inside a refrigerator door to help maintain internal temperature and reduce heat transfer. It replaces damaged or missing insulation to help the door seal and cooling performance. What it does:

• Fills the cavity inside a refrigerator door to limit air and heat transfer
• Helps the gasket maintain a consistent interior temperature by supporting proper door structure
• Commonly replaced when the original insulation is cracked, waterlogged, or missing
• Works as a direct-fit replacement for the specified OEM part number

• One side door insulation panel

• For safety, unplug the appliance or shut off power before starting repairs
• Remove the interior door panel or liner to access the insulation; handle foam carefully to avoid tearing
• Use manufacturer-recommended fasteners/adhesives if reattaching insulation; do not compress or overfill the cavity

This back cabinet cover replaces the lower rear outer panel that protects internal components and helps keep the appliance stable and secure. Restores proper enclosure and helps reduce debris entry and incidental noise. What it does:

• Covers and protects motors, wiring, and components at the appliance's rear
• Helps prevent dust, lint, and small objects from entering internal areas
• Restores proper airflow routing and reduces rattles caused by a missing or damaged panel
• Improves appliance appearance by replacing cracked, bent, or broken rear trim

• Disconnect power before servicing to avoid electrical shock
• Remove access screws or fasteners securing the old panel; retain hardware if reusable
• Handle the cover carefully to avoid bending or damaging mounting tabs

This wiring divider secures and separates appliance wiring harnesses to keep wires routed away from moving parts and sharp edges, reducing the chance of chafing and intermittent electrical problems while simplifying service access. What it does:

• Holds and separates wiring bundles to prevent rubbing, pinching, or contact with hot or moving components
• Helps maintain reliable electrical connections by keeping wires organized and strain-relieved
• Reduces risk of shorts or intermittent faults caused by damaged insulation
• Makes panel removal and reassembly neater and faster for servicing

• Disconnect power to the appliance before starting any work
• Remove the appropriate access panel to reach the wiring harness routing area
• Position the divider to guide the harness away from edges or moving parts; secure harness in the divider slot or clip as shown in OEM diagrams
• Inspect nearby wiring and connectors for damage; replace any frayed or compromised wires before restoring power

This front door insulation pad fits behind the oven door to help reduce heat loss and lower the exterior door temperature for safer, more consistent cooking. It replaces worn or damaged insulation to help the oven maintain oven cavity heat. What it does:

• Provides thermal barrier behind the oven door to reduce heat transfer
• Helps the oven hold temperature more consistently during use
• Reduces exterior door heat, improving user safety
• Replaces torn, compacted, or missing insulation that can cause heat loss

• Disconnect power to the appliance before starting any repair.
• Allow the oven and door to fully cool; handle insulation with gloves if soiled.
• Some installs require removing the oven door or inner door panel—keep screws and fasteners organized.
• If you encounter damaged clips or fasteners, replace them with OEM parts for a secure fit.

This replacement drawer panel restores the front trim and appearance of a refrigerator drawer. It provides a finished look and replaces damaged, dented, or scratched drawer fronts so the appliance looks and functions properly. What it does:

• Replaces a cracked, dented or cosmetically damaged drawer front
• Restores the drawer's finished appearance and alignment
• Provides a correct mounting surface for drawer hardware and handles
• Helps prevent sharp edges and exposed components from causing injury

• One drawer panel

• Disconnect power to the appliance before servicing for safety
• Remove the drawer and any attached trim or handles to access panel fasteners
• Retain mounting screws and clips; transfer hardware from the old panel unless new hardware is provided