Jec5030ads Parts

This high-limit thermostat is a temperature safety switch that helps prevent overheating by opening the circuit when temperatures exceed safe limits. It restores normal operation once the temperature cools, protecting the appliance and reducing fire risk. What it does:

• Monitors internal temperature and opens the circuit if heat gets too high
• Prevents overheating that can cause damage or burn odors
• Commonly replaces a failed or intermittently tripping thermal safety switch
• Works as part of the appliance's temperature-safety system, not a primary temperature control

• Disconnect power to the appliance before attempting replacement
• Observe proper wiring orientation and secure terminal connections
• Replace only with the exact part specified for your appliance

This surface heating element replaces a damaged or non-working top burner on electric ranges, restoring even heat for everyday cooking. It installs in the cooktop and connects to the range's terminal block for normal operation. What it does:

• Heats cookware on the cooktop when the burner control is turned on.
• Replaces elements that don't heat, heat intermittently, or heat unevenly.
• Helps eliminate visible burn damage or exposed wiring on the old element.
• Matches OEM fit and function for straightforward replacement.

• Disconnect power to the range at the breaker or unplug before servicing.
• Allow the old element to cool completely before removing.
• Handle terminals carefully; ensure tight, correct connections to the terminal block.
• After installation, restore power and test the burner through its full heat range.

This genuine replacement screw secures appliance components so panels, brackets, and assemblies stay tight and properly aligned. Replacing stripped, rusted, or missing hardware restores a solid fit and helps prevent rattles, shifting, or looseness over time.

• Fastens panels, brackets, and internal parts to maintain proper alignment
• Helps resolve issues caused by missing or damaged screws
• Restores secure mounting after service where original hardware is lost
• Use when threads are stripped or the screw head is damaged and won't tighten

• Disconnect power; turn off gas supply if applicable before servicing
• Match screw location and length to your model's parts diagram for correct placement
• Start threads by hand to avoid cross-threading; use the correct driver bit
• Snug firmly but do not overtighten to prevent damage to mounting points

This switch bracket mounting seal replaces a worn or damaged seal that cushions and protects the door or control switch mounting area. It helps keep the switch assembly seated and reduces debris and moisture intrusion for reliable operation. What it does:

• Seals the switch bracket mounting area to protect the switch from lint, dust and moisture
• Helps keep the switch properly positioned for accurate door or control sensing
• Can prevent intermittent or failed switch contacts caused by contamination or misalignment
• Useful when replacing a brittle, torn or missing mounting seal during switch or door repairs

• Disconnect power to the appliance before starting any repair
• Remove the door or panel per service instructions to access the switch bracket area
• Fit the seal into the bracket groove or around the switch housing, ensuring full seating without stretching
• Inspect adjacent clips or screws and reuse or replace as needed; test the switch function after reassembly

This hardware kit contains the small mounting parts needed to secure and support the appliance component. It provides replacement fasteners and brackets to restore proper fit and stability after service. What it does:

• Replaces worn or missing mounting pieces that cause loose panels or components
• Restores proper alignment and support for the associated assembly
• Helps stop rattling, vibration, or movement caused by missing hardware
• Matches OEM fit and function when used as a direct replacement

• Intended for technicians or experienced DIYers; inspect the kit before installation
• Use appropriate hand tools; tighten fasteners to manufacturer torque where specified
• Disconnect power and follow all safety procedures before servicing the appliance
• Replace only the parts shown for your specific model

This foam seal is a flexible gasket strip that cushions and helps seal appliance openings to reduce leaks, drafts, and vibration. It restores a tight seal where original foam has deteriorated. What it does:

• Replaces compressed, torn, or missing foam that allows water, air, or heat to escape
• Helps stop minor leaks and reduces drafts that can affect temperature control
• Cushions panels and doors to reduce vibration and noise
• Restores proper contact between mating surfaces for improved performance

• Disconnect power and water before beginning repair
• Clean and dry mounting surface thoroughly; remove all old adhesive and residue
• Position seal carefully; trim with a sharp blade if necessary for a precise fit
• Use appliance-safe adhesive only if the original used adhesive; avoid over-compression when installing

This 2000W bake element heats the oven cavity for baking and roasting, restoring oven cooking performance. It replaces a failed or damaged bake element to help your range reach and maintain proper baking temperatures. What it does:

• Heats the oven interior during bake cycles for even cooking
• Restores normal oven temperature when a broken element prevents heating
• Replaces elements with visible breaks, burning, or no heat output
• Helps resolve inconsistent baking and undercooked food when element-related

• Disconnect power to the range at the breaker before starting any repair
• Handle terminals and ceramic insulators carefully to avoid damage
• Basic hand tools typically required; follow your model's service instructions

This power supply is the electronic control board that provides the regulated voltages and control signals needed for the appliance's user console and main controls to operate reliably. It restores proper power distribution so controls can respond. What it does:

• Converts incoming AC to the low-voltage DC used by the console and control circuitry.
• Powers display, buttons, and control relays so the appliance can receive and execute commands.
• Common symptom: blank or unresponsive display/console.
• Common symptom: intermittent or total loss of control functions, or failure to start cycles.

• Disconnect power before servicing to avoid electrical shock.
• Handle the board by its edges and avoid ESD (static) damage—use proper grounding.
• Reassemble panels and secure connectors fully; test control functions after installation.

This surface heating element replaces a failed top burner coil to restore even cooking and proper heat at the stove surface. It fits into a standard cooktop receptacle and reconnects to the range's power terminals. What it does:

• Heats cookware when the burner is energized so pots and pans can cook or boil
• Replaces coils that no longer reach set temperatures or take too long to heat
• Restores a burner that clicks, sparks, or shows visible damage at the coil
• Helps eliminate uneven heating or intermittent on/off operation tied to a bad element

• Disconnect power at the breaker or unplug the range before servicing
• Allow the old element to cool completely before removing or handling
• Slide the element out of the receptacle and disconnect terminals; align and reconnect the replacement
• If terminals or the receptacle are damaged or corroded, replace those parts before use

This genuine replacement control knob restores user control of a stove or range control panel for reliable temperature and setting selection. It replaces a cracked, loose, faded, or missing knob so you can safely and precisely operate your appliance. What it does

• Fits onto a stove/range control shaft to turn heat and function settings.
• Replaces worn, cracked, or non-engaging knobs that slip or won't turn.
• Restores clear tactile control for burners or oven functions.
• Helps prevent accidental setting changes from damaged knobs.

• One replacement control knob.

• Turn controls off and disconnect power to the appliance before servicing.
• Pull the old knob straight off the control shaft; press the new knob firmly onto the shaft until seated.
• Verify proper fit and function before returning the appliance to normal use.

This electronic control board powers and manages the oven's front console functions, restoring control and display responsiveness. Replaces a failed console board to help the oven accept commands and display status correctly. What it does:

• Receives user inputs from the console and sends commands to the oven's systems
• Controls display, clock, timers, and touchpad/keypad response
• Manages bake/broil cycles and communicates status to other control modules
• Can resolve symptoms like unresponsive buttons, blank or erratic display, or incorrect cycle behavior

• Turn off power at the breaker before accessing the console; risk of electrical shock if powered
• Handle the board by the edges and avoid touching components to prevent static damage
• Verify model fit and connections before final reassembly