Jgbs10dem3ww Parts

This is a replacement mounting screw for the refrigerator/freezer thermostat assembly. It secures the thermostat to the cabinet so temperature sensing and control remain stable and reliable. What it does:

• Secures the thermostat housing or bracket to the appliance cabinet
• Keeps the thermostat properly positioned for accurate temperature sensing
• Common fix when a loose, missing, or stripped thermostat fastener causes rattling or poor contact
• Small hardware part used during thermostat replacement or reassembly

• One thermostat mounting screw

• Turn off power to the appliance before starting any repair
• Use appropriate screwdriver and do not overtighten to avoid stripping the housing or threads
• If original hole or threads are damaged, inspect bracket or cabinet and replace as needed

The GE Range Support Base is an OEM replacement part for GE wall ovens and ranges. It provides critical support and stability for the appliance, ensuring safe and reliable operation. 

Causes of a bad support base could include cracks or breaks in the material over time due to repeated stresses and strains from the heavy appliance above it. The base may also become damaged or unstable if the unit is moved incorrectly and suffers impact.

Symptoms of a failing support base include:

• The oven or range rocking or becoming unlevel during use  
• Noisy or squeaking sounds coming from the base
• Visible cracks or weaknesses in the material
• The appliance seeming loose or unstable on the countertop or floor

This genuine GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

Package of 12

This broil handle clip secures the broiler door handle to the oven door, restoring a safe, solid grip and preventing the handle from slipping or detaching. It's a small replacement part that fixes loose or wobbly broiler handles. What it does:

• Holds the broil/door handle firmly in place so the handle doesn't move or fall off
• Addresses symptoms like a loose, wobbly, or partially detached broiler handle
• Matches OEM function and fit to maintain proper door operation
• Works with the existing handle and mounting hardware when undamaged

• One broil handle retaining clip (single clip as shown)

• Disconnect power to the appliance before beginning any repair
• Remove the oven door or access panel per the manufacturer instructions to reach the handle clip
• Reuse existing screws and handle hardware unless they are damaged; replace as needed

This contoured washer is a shaped fastening washer used on compatible GE top-load washers to secure and cushion mating parts. It helps maintain proper alignment and reduces wear where parts bear against each other. What it does

• Provides a contoured bearing surface to help distribute load and reduce point wear
• Cushions and isolates components to help limit vibration and noise
• Secures fasteners or assemblies in tight, shaped recesses
• Helps maintain correct part alignment for reliable operation

• One contoured washer

• Disconnect power to the washer before servicing to avoid shock or injury
• Use proper tools and observe orientation; tighten fasteners to manufacturer guidance

This cable clamp secures the appliance power cord where it enters the cabinet, protecting wiring from pull and chafe for safer, more reliable operation. Designed to hold the cord firmly in place and prevent accidental disconnection. What it does:

• Acts as a strain relief to prevent the power cord from pulling into or away from the appliance
• Protects wiring from abrasion and sharp edges at the entry point
• Helps maintain a secure electrical connection to reduce intermittent power issues
• Commonly used where the cord passes through a rear or bottom access panel

• Disconnect power before inspecting or replacing the clamp to avoid shock or injury
• Install at the cord entry so the clamp captures the cord jacket; tighten fastener securely but do not over-torque
• Verify the cord is correctly routed and not pinched when reassembling panels
• If any wiring or the cord jacket is damaged, replace the cord before restoring power

The GE Front Orifice Holder-Left is an OEM part for GE gas ranges. It secures the front left burner's gas orifice nozzle to properly regulate fuel delivery.

Symptoms of a bad front orifice holder include:  

• Burning or fire hazards if gas leaks around the holder's joint
• Inability to adjust the flame height or heat level on that burner  
• Uneven heating performance between the front left burner and others

Causes may include cracks, corrosion or material fatigue developing in the holder over many heating and cooling cycles. Mineral deposits could also potentially cause issues. 

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore gas ranges.

The Knob Thermostat Assembly is an OEM part for GE gas ranges. It allows for control of oven baking temperatures through the regulation of pilot lights and burners.

Symptoms of a bad knob thermostat assembly include:  

• Erratic or inaccurate temperature readings
• Difficulty selecting or maintaining desired heat levels
• Unstable or inconsistent baking performance   
• Improper ignition or control of range burners

Causes of a malfunctioning knob thermostat include continuous exposure to cooking heat and normal wear over extended use. The internal components experience constant adjustment and fluctuations that can lead to loosening or degradation over time.

This part works for some Hotpoint and RCA gas range models as well.

The Burner/Oven Assembly is an OEM part for GE gas ranges. It holds ignition and valve components over lower cooking surfaces. 

Causes of failure include deterioration of high-temperature seals from repeated heating cycles, stripped mounting points from frequent removal/cleaning access, and impact damage to housing structures.

Symptoms of a faulty burner/oven assembly are:

• Gas leaks around burner bases or control knobs
• Unstable or irregular flame sizes lacking responsiveness   
• Potential safety hazards from exposed connections or cracks 

This OEM part is compatible with Hotpoint and RCA gas range models as well.

The Burner Box Harness is an OEM part for GE gas ranges. It connects burners and heating elements to power and modulation controls.  

Symptoms of a bad burner box harness include:

• Inability to select bake/broil functions or heating levels 
• Faulty or unresponsive oven/burner temperature knobs 
• Intermittent or unstable heating performance from areas

Causes involve wire degradation from long-term ambient heat, cuts from sharp surfaces, or loose connections that compromise conductivity. 

This OEM part is also compatible with Hotpoint and RCA electric range models.

This small replacement bumper cushions and protects the appliance frame/trim where panels meet, helping reduce vibration, chipping and rattles for a cleaner, quieter fit. Ideal when the original bumper is worn, cracked or missing. What it does:

• Cushions contact between the frame/trim and adjacent panels to reduce noise and prevent damage
• Helps maintain proper panel alignment and sealing where the trim meets the cabinet
• Reduces rattling or vibration caused by loose or degraded trim pads
• Restores protective spacing that prevents chips or scratches to finished surfaces

• One frame front bumper

• Disconnect power to the appliance before starting work and follow all safety precautions
• Usually installs by pressing into a slot or onto a mounting surface after removing the trim piece; some trim removal may be required
• Inspect mating surfaces for damage or debris and clean before installing the new bumper
• Replace with the exact part number only; do not force or modify the bumper to fit

A sealed rocker switch that replaces a worn or failed control switch to restore reliable on/off or selector operation. Designed to keep contacts protected from moisture and debris for consistent performance. What it does:

• Provides a user-facing rocker control to open/close electrical circuits for the appliance function.
• Replaces switches that cause intermittent operation, no response, or stuck on/off conditions.
• Sealed design helps protect internal contacts from moisture, spills, and dirt that can cause failures.
• Matches the OEM form and mounting for a direct-fit replacement when the original switch is damaged.

• Disconnect power or unplug the appliance before starting any repair.
• Note or photograph wire locations before removing connectors to ensure correct reinstallation.
• Basic hand tools (screwdriver, pliers) are typically required; avoid forcing wiring or terminals.

This is a replacement front drawer panel that restores the exterior finish and proper fit of the appliance drawer. It's a straightforward cosmetic and structural replacement that helps the drawer close and align correctly. What it does:

• Replaces a dented, scratched, cracked or bent drawer front to restore appearance
• Provides the mounting surface and attachment points for the drawer assembly and handle
• Helps the drawer sit and close flush with surrounding cabinetry/appliance openings
• Prevents further damage from a compromised front that can catch or snag

• Disconnect power to the appliance or follow the manufacturer's service safety recommendations before starting.
• Remove drawer contents and follow service manual steps to detach the drawer assembly; may require removing screws, clips or trim pieces.
• Transfer handle or trim to the new panel; verify fasteners and alignment before final tightening.