Jgbs60dekbb Parts

This oven back insulation is the replacement rear cavity pad that helps contain oven heat and protect rear components and cabinetry. It restores proper thermal barrier performance for safer, more consistent oven operation. What it does:

• Provides a thermal barrier behind the oven cavity to limit heat transfer to the rear panel and surrounding cabinetry
• Helps maintain more consistent cooking temperatures by reducing heat loss through the back
• Protects wiring, controls, and exterior surfaces from excessive heat exposure
• Replaces missing, damaged, or deteriorated insulation that can cause higher rear-surface temperatures or heat-related odors

• One oven back insulation pad as shown

• Disconnect power to the appliance before servicing
• Remove the range/oven from its enclosure and access the rear panel per your model's service instructions
• Handle insulation with gloves and a mask if fibers are exposed; avoid compressing or tearing the material
• Secure the insulation in the original position with factory fasteners or clips; verify no obstruction of vents or wiring before reassembly

This oven cavity insulation wrap replaces degraded or missing insulation to help reduce heat loss and keep external surfaces cooler. It fits around the oven cavity to support efficient, even heating and protect surrounding cabinet areas. What it does:

• Replaces torn, compressed, or missing oven cavity insulation that can reduce thermal efficiency
• Helps maintain oven temperature stability by minimizing heat loss through the cavity walls
• Lowers heat transfer to adjacent cabinet surfaces and control panels
• Can reduce hot spots on the exterior during extended baking or roasting

• High-level replacement — remove power to the appliance and allow the oven to fully cool before beginning
• Wear gloves and eye protection; insulation fibers can irritate skin and lungs
• Observe OEM disassembly order for door, panels, or mounting clips; retain and reuse any original fasteners unless damaged

This side door insulation panel installs inside a refrigerator door to help maintain internal temperature and reduce heat transfer. It replaces damaged or missing insulation to help the door seal and cooling performance. What it does:

• Fills the cavity inside a refrigerator door to limit air and heat transfer
• Helps the gasket maintain a consistent interior temperature by supporting proper door structure
• Commonly replaced when the original insulation is cracked, waterlogged, or missing
• Works as a direct-fit replacement for the specified OEM part number

• One side door insulation panel

• For safety, unplug the appliance or shut off power before starting repairs
• Remove the interior door panel or liner to access the insulation; handle foam carefully to avoid tearing
• Use manufacturer-recommended fasteners/adhesives if reattaching insulation; do not compress or overfill the cavity

This vent trim is the exterior trim piece that covers and directs the oven/range vent opening for a finished look and proper airflow path. It restores appearance and seals the vent perimeter. What it does:

• Covers the vent opening to hide internal components and improve the appliance's appearance
• Helps guide exhaust airflow from the oven cavity to the external vent area
• Replaces cracked, warped, discolored, or missing vent trim that causes unsightly gaps
• Prevents small debris from entering the vent opening

• One vent trim

• Turn off power to the appliance before starting work to avoid electrical hazards
• Remove any damaged trim and retain fasteners; inspect mounting area for damage before installing the new trim
• Align trim carefully and secure using the original screws or clips; avoid over-tightening to prevent cracking

The trim post left is an OEM part for GE ranges. It is located on the left side of the range and provides structural support to the range cabinet and door glass. The trim post helps brace the sides of the glass door to prevent flexing and bowing over time. Without proper support from a sturdy trim post, the door glass could warp or crack under its weight. 

Causes of a bad trim post can include cracks or damage reducing its ability to reinforce the glass.

Symptoms of a bad trim post include:

• Visible cracking or bending of the door glass
• Looseness, movement, or inability to securely mount the post  
• Warping or flexing of the glass door 

This OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This is a replacement control panel overlay (T09) that restores button labels and the finished surface on the oven/range control console for clear, reliable user input. It helps refresh a worn, cracked, or faded control area. What it does:

• Replaces a damaged, cracked, or peeled control panel overlay so keypad legends and markings are readable
• Protects the underlying membrane switch and electronics from spills and wear
• Restores the finished appearance of the control console for easier operation
• Can resolve issues where worn or missing labels cause user confusion

• One control panel overlay (T09)

• Always disconnect power to the appliance before starting any work
• Install is cosmetic/mechanical; remove the old overlay and align the replacement carefully to the console
• Handle gently to avoid creasing; some models use adhesive or require console removal

This is the cooktop surface that sits on top of the range and provides the flat mounting area for burners and grates. It restores a finished cooking surface and protects internal components from spills and debris. What it does:

• Replaces a cracked, warped, or heavily scratched cooktop surface
• Provides a stable mounting area for burners, grates, and burner caps
• Helps prevent spills and food debris from entering the range interior
• Restores proper fit and alignment of surface components for safe cooking

• One range top (cooktop surface) as shown

• Disconnect power (and gas if applicable) before beginning service
• Remove burner grates, burner caps, and any screws or retainers securing the cooktop before lifting
• Handle edges carefully to avoid cuts; a second person may be needed for safe removal/installation
• Follow OEM instructions for reassembly and test burners after installation

This range top is the cooktop surface replacement that restores a flat, finished surface for electric ranges. It provides a stable base for burners and makes cleanup easier compared to damaged or warped tops. What it does:

• Covers the range opening and supports surface burners or elements
• Keeps spills and splatters off internal components to protect wiring and controls
• Helps maintain proper alignment of burners and trim pieces for even heating
• Commonly replaced when the surface is cracked, warped, rusted, or cosmetically damaged

• Replacement requires removing the cooktop and disconnecting power; turn off and unplug the appliance or shut off the breaker before starting
• Handle sheet-metal edges carefully to avoid cuts; wear gloves and eye protection
• May require detaching burners, trim, and/or support brackets—keep fasteners organized for reassembly

This end support secures and aligns the dryer drum so it turns smoothly and reduces wear. It replaces a worn or broken support to restore proper drum rotation and quiet operation. What it does:

• Supports the drum edge and maintains proper drum alignment during rotation
• Helps reduce rubbing, scraping, wobble, and abnormal noise from a loose drum
• Prevents uneven wear on the drum and neighboring components
• Works with rollers/bearings and rear support to keep the drum turning smoothly

• Disconnect power (and gas supply if applicable) before beginning any repairs
• Access typically requires removal of the dryer front or bulkhead; follow your model-specific service manual
• Inspect adjacent rollers, bearings, and mounting hardware; replace any worn parts to prevent repeat failures
• Use hand tools and avoid forcing components; secure fasteners to OEM torque specs when available

This end support holds and aligns the dryer drum shaft, helping the drum spin smoothly and quietly. Replace a worn end support to reduce squeaks, wobbling, or drum misalignment for safer, more reliable operation. What it does:

• Supports the drum shaft at the rear of the dryer to keep the drum centered and rotating evenly
• Maintains proper drum-to-drum seal and clearance to prevent rubbing and excess wear
• Helps reduce noise and vibration caused by a loose or damaged rear support
• Works with the drum bearing/shaft assembly to preserve smooth drum rotation

• One end support

• Disconnect power before starting work to avoid electrical shock
• Inspect surrounding drum bearings, rollers, and seals; replace any worn components for best results
• Moderate mechanical skill required; follow OEM disassembly steps and torque recommendations
• Use proper alignment during reassembly to prevent premature wear

This right-side trim post secures and finishes the edge of the appliance's trim assembly, restoring a flush, stable fit and improving the appearance of the unit. It replaces damaged or missing right-side trim support. What it does

• Provides structural support for the right edge of the trim/face assembly
• Holds trim in alignment to prevent gaps or rubbing against adjacent panels
• Restores a finished appearance when the original post is cracked, broken, or missing
• Helps reduce vibration or rattling caused by loose trim

• Disconnect power to the appliance before beginning any work
• Remove surrounding trim or panels as required to access the post; keep fasteners organized
• Inspect adjacent clips and screws and replace if worn to ensure a secure fit

This vent trim is the exterior trim piece that finishes the vent opening on your range or oven, restoring a clean, factory look and helping cover the gap where the appliance vents. What it does

• Replaces damaged, dented, or missing vent trim to restore appliance appearance.
• Covers and protects the vent opening edges for a finished look.
• Helps prevent small items from catching on exposed vent edges.
• Stops rattling or loose trim that may occur when the original piece is bent or broken.

• One vent trim

• Disconnect power to the appliance before beginning any repair.
• Handle trim carefully—edges can be sharp.
• May require removal of the oven door or control panel for access; refer to your model's service manual.
• Use original mounting screws or hardware; replace with manufacturer-specified parts.