Jgbs66dek4bb Parts

This top-door insulation replaces the foam insert behind the refrigerator/freezer door panel to help maintain interior temperature and reduce heat transfer. Restores proper door insulation for more consistent cooling. What it does

• Provides thermal insulation behind the top door panel to help keep cold in and heat out
• Helps reduce frost buildup and temperature fluctuations near the door area
• Limits air transfer that can increase compressor run-time and energy use
• Restores proper fit and support for the inner door panel

• Disconnect power to the appliance before starting any repair.
• Remove the inner door panel fasteners and lift the panel to access the old insulation; handle panels carefully to avoid damage.
• Replace with the exact OEM insulation and resecure the inner panel per manufacturer instructions.
• If clips, adhesive, or fasteners are damaged or missing, replace them before reassembly.

This small replacement bumper cushions and protects the appliance frame/trim where panels meet, helping reduce vibration, chipping and rattles for a cleaner, quieter fit. Ideal when the original bumper is worn, cracked or missing. What it does:

• Cushions contact between the frame/trim and adjacent panels to reduce noise and prevent damage
• Helps maintain proper panel alignment and sealing where the trim meets the cabinet
• Reduces rattling or vibration caused by loose or degraded trim pads
• Restores protective spacing that prevents chips or scratches to finished surfaces

• One frame front bumper

• Disconnect power to the appliance before starting work and follow all safety precautions
• Usually installs by pressing into a slot or onto a mounting surface after removing the trim piece; some trim removal may be required
• Inspect mating surfaces for damage or debris and clean before installing the new bumper
• Replace with the exact part number only; do not force or modify the bumper to fit

This is a replacement front drawer panel that restores the exterior finish and proper fit of the appliance drawer. It's a straightforward cosmetic and structural replacement that helps the drawer close and align correctly. What it does:

• Replaces a dented, scratched, cracked or bent drawer front to restore appearance
• Provides the mounting surface and attachment points for the drawer assembly and handle
• Helps the drawer sit and close flush with surrounding cabinetry/appliance openings
• Prevents further damage from a compromised front that can catch or snag

• Disconnect power to the appliance or follow the manufacturer's service safety recommendations before starting.
• Remove drawer contents and follow service manual steps to detach the drawer assembly; may require removing screws, clips or trim pieces.
• Transfer handle or trim to the new panel; verify fasteners and alignment before final tightening.

This rangetop bracket assembly secures the cooktop to the range frame so the cooktop sits level and stable. It's a direct-replacement mounting bracket designed to restore proper support and alignment for the rangetop. What it does

• Secures the rangetop to the range frame so the cooktop remains stable and flush
• Prevents movement that can cause burner misalignment or gaps between the cooktop and range
• Restores correct alignment after collisions, wear, or damaged brackets
• Works as a structural mounting piece used during rangetop installation or reassembly

• Disconnect power (and gas, if applicable) before starting any repair.
• Handle sharp edges and heavy components carefully; use gloves and eye protection.
• Follow the range's service manual for disassembly/reassembly steps and torque specs.

This is a 10-16 Phillips pan point screw used to secure panels and components on compatible GE appliances. It replaces a missing or stripped fastener to restore proper fit and reduce vibration or rattling. What it does:

• Secures panels, brackets, or trim pieces to the appliance cabinet or internal assemblies
• Restores secure mounting when original screw is lost, damaged, or stripped
• Helps stop loose parts from vibrating or shifting during operation
• Matches the original fastener type and drive style for a proper fit

• One 10-16 Phillips pan point screw

• Use the correct Phillips screwdriver size to avoid cam-out or stripped heads
• Tighten until snug; avoid over-torquing which can strip threads or crack plastics
• Replace any stripped or damaged mating nut/threads for reliable fastening
• Disconnect power and follow appliance-specific safety steps before servicing

The Black Handle and Endcap is an OEM part for GE ranges. It includes both the oven door handle as well as the decorative endcaps on either side. Providing a sophisticated look, these parts play an important aesthetic role.

The handle and endcaps are responsible for a sleek modern style. Made from durable black materials, they can resist everyday wear without showing fingerprints or other marks as easily as lighter tones.

Symptoms of a bad handle and endcaps include:

• Cracked, chipped or broken surfaces
• Loose fit that enables dirt/grime behind the endcaps
• Dull, faded or stained appearance

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

A welded door liner assembly that replaces a damaged or dented inner door shell to restore proper sealing and appearance. Designed as a direct-replacement inner surface for affected appliance doors. What it does

• Replaces a cracked, dented, or otherwise damaged inner door liner that can allow drafts or interfere with proper door closure.
• Restores the door's interior surface so gaskets and inner components mount correctly.
• Helps eliminate cold or heat leaks caused by a compromised liner.
• Improves door appearance and prevents further damage to internal door parts.

• Disconnect power and follow OEM service manual instructions before starting work.
• Use safe handling practices — edges may be sharp and assembly can be heavy; use gloves and eye protection.
• May require removing door panels, trim, and hardware; retain mounting screws and check gasket seating during reassembly.

This replacement door trim restores the finished edge and appearance of the appliance door, covering the perimeter for a clean look and helping keep door components protected from everyday wear. What it does:

• Replaces damaged, cracked, or missing outer door trim to restore appearance
• Covers and protects the door edge and mounting points from chips and dings
• Helps maintain a continuous seal area by keeping trim aligned and secure
• Common symptom: visible cracks, warped or loose trim around the door edge

• Disconnect power to the appliance or unplug before starting work
• Remove the old trim carefully to avoid scratching the door finish or damaging clips
• Use appropriate tools and a helper if the door is heavy; align trim and secure fasteners per OEM instructions
• Wear gloves to protect hands from sharp edges and to avoid fingerprints on finished surfaces

This spacer base positions and supports components inside the appliance to maintain correct alignment and clearance, helping reduce vibration and wear. It's a simple replacement part when the original is cracked, broken, or missing. What it does:

• Provides a stable mounting surface and correct spacing for internal panels or components
• Restores proper alignment to reduce vibration, noise, and uneven operation
• Commonly replaced when the original spacer is cracked, deformed, or missing
• Helps maintain secure fastener engagement and proper component clearance

• Spacer base (single piece)

• Disconnect power to the appliance before starting any repair
• Follow manufacturer service instructions or parts diagram for correct location and orientation
• Basic hand tools typically required; inspect surrounding fasteners and mounting surfaces during installation

This panel side foil is a decorative side trim that restores the appliance's finished appearance and helps protect the cabinet edge from everyday wear. It's a direct-replacement exterior trim piece. What it does

• Covers and protects the outer edge of the appliance panel or door to maintain a clean, finished look
• Hides scratches, nicks, or peeled paint along the panel edge
• Restores consistent appearance after panel or door repair or replacement
• Keeps the cabinet edge sealed from light contact and minor abrasion

• One panel side foil

• High-level replacement: remove the outer panel or door to access the existing foil before installing the new piece
• Use care to avoid scratching the new foil during installation; soft cloths and non-marring tools recommended
• If adhesive or fasteners are present on the original, remove old adhesive residue and follow OEM attachment method

This panel backer is the interior support piece that helps secure and align the appliance control panel, protecting wiring and switches while keeping the panel stable during use. It restores proper fit and prevents rattling or loose controls. What it does:

• Supports and positions the control/display panel so buttons and switches align correctly
• Protects internal wiring and components behind the control panel
• Reduces panel flexing, vibration noise, and intermittent button contact
• Helps maintain a flush, stable control surface for reliable operation

• Disconnect power before starting — follow appliance-specific safety steps
• Remove the outer control/display panel to access and replace the backer
• Transfer any buttons, clips, or switches from the old backer to the new part as needed
• Inspect adjacent wiring and mounting clips; replace any damaged fasteners for a secure fit

The GE Range Support Base is an OEM replacement part for GE wall ovens and ranges. It provides critical support and stability for the appliance, ensuring safe and reliable operation. 

Causes of a bad support base could include cracks or breaks in the material over time due to repeated stresses and strains from the heavy appliance above it. The base may also become damaged or unstable if the unit is moved incorrectly and suffers impact.

Symptoms of a failing support base include:

• The oven or range rocking or becoming unlevel during use  
• Noisy or squeaking sounds coming from the base
• Visible cracks or weaknesses in the material
• The appliance seeming loose or unstable on the countertop or floor

This genuine GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This replacement panel broiler restores the oven's internal broiler surface so heat reflects properly for consistent top-heat cooking and protects internal components from direct flame and spills. Fits the oven broil cavity where the broil element mounts. What it does:

• Provides the mounting and protective surface for the broil element and helps reflect broil heat across food
• Restores even browning and searing when a damaged or warped panel causes uneven broiling
• Protects internal oven walls and wiring from grease, drips and direct flame contact
• Helps reduce smoke and flare-ups caused by burned-on residue on a damaged panel

• One replacement inner broiler panel

• Disconnect power to the appliance before servicing to avoid shock hazard
• Basic hand tools are typically required; handle edges carefully — panel may have sharp metal edges
• Clean surrounding area and broil element before installation; replace only with the exact part number shown