Jgbs66rekss Parts

This surface burner valve regulates gas flow to a single cooktop burner for smooth, precise flame control. Replacing a worn valve can restore reliable ignition and adjustment on the affected burner while maintaining safe operation.

• Regulates and meters gas from the manifold to one surface burner
• Works with the control knob to provide simmer-to-high flame settings
• Common failure symptoms include: burner won't ignite, weak or unstable flame, gas odor near the knob/valve area, or a knob that is hard to turn
• Labeled "270" per GE specification to match the correct valve style/position used in select models

• Disconnect power and shut off the gas supply before servicing
• Access the manifold; note the valve's position and orientation before removal
• Reassemble and check all connections for leaks using an approved leak-detection solution
• If the burner still won't light, also inspect the burner orifice, igniter, and spark system

The Burner/Oven Assembly is an OEM part for GE gas ranges. It holds ignition and valve components over lower cooking surfaces. 

Causes of failure include deterioration of high-temperature seals from repeated heating cycles, stripped mounting points from frequent removal/cleaning access, and impact damage to housing structures.

Symptoms of a faulty burner/oven assembly are:

• Gas leaks around burner bases or control knobs
• Unstable or irregular flame sizes lacking responsiveness   
• Potential safety hazards from exposed connections or cracks 

This OEM part is compatible with Hotpoint and RCA gas range models as well.

The Stainless Steel Handle and Endcap is an OEM component specifically designed for GE ranges. This handle allows users to safely open and close the oven door. 

Causes of a bad handle and endcap include damage from heat exposure over time, dents or cracks from accidental bumps or falls, or stripped or worn components that impact functionality. A securely latching door is essential for both safety and appliance performance. 

Symptoms of a bad handle and endcap include:

• The oven door no longer latching properly
• Difficulty opening or closing the door 
• Excessive movement or play when door is closed
• Loose, missing, or non-functional components

This genuine OEM GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Orifice Spud is an OEM replacement part for GE gas ranges. It is responsible for metering the flow of gas into each burner pipe, controlling the air and gas mixture for proper flame combustion.   

Symptoms of a bad orifice spud include: 

• Yellow or unstable burner flames
• Improper heating of pots and pans  
• Decreased gas pressure or cooktop output
• Gas leaks or excessive clicking from the gas valve

Causes for a bad orifice spud can include wear from contaminants over time, cracks or blockages altering gas flow, or damage from mishandling. 

This GE replacement is compatible with Hotpoint, RCA, and Kenmore models as well.

The drawer panel is an OEM part for GE ranges. It serves as the front cover for the bottom drawer, providing a sleek and finished look to your range.

A bad drawer panel can result in issues such as dents, scratches, or a damaged appearance. Causes of a bad panel can include accidental impacts, wear and tear over time, or improper handling.

Symptoms of a bad drawer panel include:

• Visible dents or scratches on the panel
• Loose or misaligned door panel
• Discoloration or fading of the panel
• Difficulty in opening or closing the bottom drawer  

Replace your worn-out or damaged drawer panel  with this genuine OEM GE part to restore your range. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This top-door insulation replaces the foam insert behind the refrigerator/freezer door panel to help maintain interior temperature and reduce heat transfer. Restores proper door insulation for more consistent cooling. What it does

• Provides thermal insulation behind the top door panel to help keep cold in and heat out
• Helps reduce frost buildup and temperature fluctuations near the door area
• Limits air transfer that can increase compressor run-time and energy use
• Restores proper fit and support for the inner door panel

• Disconnect power to the appliance before starting any repair.
• Remove the inner door panel fasteners and lift the panel to access the old insulation; handle panels carefully to avoid damage.
• Replace with the exact OEM insulation and resecure the inner panel per manufacturer instructions.
• If clips, adhesive, or fasteners are damaged or missing, replace them before reassembly.

This small replacement bumper cushions and protects the appliance frame/trim where panels meet, helping reduce vibration, chipping and rattles for a cleaner, quieter fit. Ideal when the original bumper is worn, cracked or missing. What it does:

• Cushions contact between the frame/trim and adjacent panels to reduce noise and prevent damage
• Helps maintain proper panel alignment and sealing where the trim meets the cabinet
• Reduces rattling or vibration caused by loose or degraded trim pads
• Restores protective spacing that prevents chips or scratches to finished surfaces

• One frame front bumper

• Disconnect power to the appliance before starting work and follow all safety precautions
• Usually installs by pressing into a slot or onto a mounting surface after removing the trim piece; some trim removal may be required
• Inspect mating surfaces for damage or debris and clean before installing the new bumper
• Replace with the exact part number only; do not force or modify the bumper to fit

This stainless steel manifold panel restores the front-facing trim and protection around the cooktop/oven gas manifold area, returning a finished look and shielding internal components from spills and debris. What it does

• Covers and protects the manifold and control area from spills, grease, and accidental contact
• Restores the appliance's front appearance when the original panel is dented, scratched, or corroded
• Helps maintain proper airflow/clearance around controls and valves when installed correctly
• Common replacement for visible damage or after servicing internal components

• Disconnect power and shut off the gas supply before starting any work
• Handle edges carefully; metal trim can be sharp
• Installation typically requires removing control knobs and/or the cooktop; keep fasteners organized
• If gas valves or lines are disturbed, check connections and test for leaks

This is a 10-16 Phillips pan point screw used to secure panels and components on compatible GE appliances. It replaces a missing or stripped fastener to restore proper fit and reduce vibration or rattling. What it does:

• Secures panels, brackets, or trim pieces to the appliance cabinet or internal assemblies
• Restores secure mounting when original screw is lost, damaged, or stripped
• Helps stop loose parts from vibrating or shifting during operation
• Matches the original fastener type and drive style for a proper fit

• One 10-16 Phillips pan point screw

• Use the correct Phillips screwdriver size to avoid cam-out or stripped heads
• Tighten until snug; avoid over-torquing which can strip threads or crack plastics
• Replace any stripped or damaged mating nut/threads for reliable fastening
• Disconnect power and follow appliance-specific safety steps before servicing

A welded door liner assembly that replaces a damaged or dented inner door shell to restore proper sealing and appearance. Designed as a direct-replacement inner surface for affected appliance doors. What it does

• Replaces a cracked, dented, or otherwise damaged inner door liner that can allow drafts or interfere with proper door closure.
• Restores the door's interior surface so gaskets and inner components mount correctly.
• Helps eliminate cold or heat leaks caused by a compromised liner.
• Improves door appearance and prevents further damage to internal door parts.

• Disconnect power and follow OEM service manual instructions before starting work.
• Use safe handling practices — edges may be sharp and assembly can be heavy; use gloves and eye protection.
• May require removing door panels, trim, and hardware; retain mounting screws and check gasket seating during reassembly.

This vent trim is a replacement trim piece that restores the finished edge around the appliance exhaust opening and helps direct airflow while improving appearance. Use it to replace dented, cracked, or missing trim for a clean fit. What it does:

• Covers and finishes the exhaust opening, preventing visible gaps and improving appliance appearance
• Helps guide and direct airflow from the vent outlet
• Protects internal components from large debris and keeps the vent area tidy
• Common symptom: trim is cracked, bent, loose, or missing and exposes the vent opening

• One vent trim piece

• Turn off power to the appliance before starting any work; follow all safety precautions
• May require removing nearby trim or grille panels; retain all fasteners and note their locations
• Handle edges carefully — metal trim can have sharp edges

This spacer base positions and supports components inside the appliance to maintain correct alignment and clearance, helping reduce vibration and wear. It's a simple replacement part when the original is cracked, broken, or missing. What it does:

• Provides a stable mounting surface and correct spacing for internal panels or components
• Restores proper alignment to reduce vibration, noise, and uneven operation
• Commonly replaced when the original spacer is cracked, deformed, or missing
• Helps maintain secure fastener engagement and proper component clearance

• Spacer base (single piece)

• Disconnect power to the appliance before starting any repair
• Follow manufacturer service instructions or parts diagram for correct location and orientation
• Basic hand tools typically required; inspect surrounding fasteners and mounting surfaces during installation

This panel side foil is a decorative side trim that restores the appliance's finished appearance and helps protect the cabinet edge from everyday wear. It's a direct-replacement exterior trim piece. What it does

• Covers and protects the outer edge of the appliance panel or door to maintain a clean, finished look
• Hides scratches, nicks, or peeled paint along the panel edge
• Restores consistent appearance after panel or door repair or replacement
• Keeps the cabinet edge sealed from light contact and minor abrasion

• One panel side foil

• High-level replacement: remove the outer panel or door to access the existing foil before installing the new piece
• Use care to avoid scratching the new foil during installation; soft cloths and non-marring tools recommended
• If adhesive or fasteners are present on the original, remove old adhesive residue and follow OEM attachment method

This backguard is the upright rear panel that fits behind a freestanding range's cooktop and control area, restoring the range's finished appearance and protecting wall surfaces from heat and splatters. It's a direct-fit exterior replacement. What it does:

• Covers the rear of the range to hide internal components and give a finished look
• Shields the wall and paint from heat, grease, and food splatter during cooking
• Restores proper mounting surface for rear-mounted controls and trim as designed
• Helps keep wiring and internal components enclosed for normal appliance operation

• Disconnect power (unplug or switch off breaker) before starting any work.
• Remove cooktop or control panel per manufacturer instructions to access backguard fasteners.
• Handle edges carefully to avoid scratches; use appropriate fasteners and alignment when reattaching.
• Replace damaged clips, screws, or trim with OEM parts for secure installation.