Jgp 975 Sek2-Ss Parts

Package of 12

This replacement screw secures appliance panels and components to restore proper fit and prevent rattling or movement. Use it to replace a missing or stripped fastener for a snug, durable connection. What it does:

• Secures trim, panels, brackets, or internal components in place
• Restores proper alignment and reduces vibration or noise
• Replaces missing, worn, or damaged screws that cause loose parts
• Compatible with the original mounting point and fastening method

• Turn off power and unplug the appliance before starting any repair
• Use the correct driver to avoid stripping the head; match thread engagement fully
• If threads are damaged, inspect the mating part and replace or repair as needed

This maintop assembly replaces a worn or damaged 36-inch stainless cooktop surface to restore a flat, stable base for burners and controls. It improves appearance and provides a secure mounting surface for safe, even cooking. What it does:

• Replaces the main cooktop surface and supports burners, grates and control components.
• Restores a flat, stable surface when the original top is dented, warped, corroded or badly scratched.
• Helps ensure burners and grates sit correctly for more even heating and reliable performance.
• Refreshes the appliance finish for easier cleaning and improved appearance.

• Disconnect electrical power (and gas supply on gas ranges) before starting any work.
• This is a large component; use two people to avoid damage or injury during removal and installation.
• Keep and label screws, brackets and trim during disassembly — some installations reuse existing hardware.

This infinite switch harness assembly provides the electrical connection between the range/stovetop infinite (surface) switch and the cooktop element, restoring proper power control to a single surface burner. What it does:

• Connects the infinite control switch to the bake/element terminal to allow variable heat settings
• Replaces damaged, burnt, or loose wiring that causes intermittent or no power to a surface burner
• Helps stop sparking, arcing, or failed temperature control linked to a faulty harness connection
• Restores reliable electrical contact for safe burner operation when the switch works but the burner does not

• One infinite switch harness assembly

• Power off and unplug the appliance or shut off the breaker before accessing internal wiring
• Verify switch and element condition; replace only the parts explicitly shown to be faulty
• Handle wires and terminals carefully to avoid bending or breaking connector tabs

This 1/4-20 screw secures panels, brackets, and other assemblies in your appliance. It restores a tight, reliable hold when an original fastener is missing, stripped, or corroded.

• Fastens components that require a 1/4-20 threaded screw
• Helps keep panels and assemblies aligned and rattle-free
• Direct replacement for worn, rusted, or lost hardware
• Common symptoms: loose or vibrating parts, misaligned brackets, missing fastener

• Disconnect power; turn off gas supply before servicing
• Allow the appliance to cool; wear gloves and eye protection
• Start threads by hand to avoid cross-threading; use the correct driver/tool
• Tighten snugly—do not overtighten to prevent stripping or damage

The Grate Assembly is an OEM component specifically designed for GE cooktops. This small center grate installs securely within the cooktop area, providing an easy-to-clean surface for cooking various foods. The grate assembly is responsible for protecting the cooktop below while still allowing heat to reach pans placed atop it. 

Causes of a bad grate include long-term use taking its toll on the material integrity, accidental impact damage, or improper cleaning techniques like submerging in water while still hot.

Symptoms of a bad grate include:

• Warping or deformation so food no longer sits properly
• Cracks or breaks that could allow spillage to contact heating elements  
• Difficulty removing or cleaning due to damage or loose fittings

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. 

This igniters and harness assembly replaces a damaged spark igniter and its wiring to restore reliable ignition for gas ovens and ranges. It provides the ignition spark and a pre-wired harness for a direct replacement. What it does:

• Delivers spark to the burner igniters so gas burners light reliably
• Replaces cracked, broken, or non-sparking igniters and worn wiring
• Stops intermittent or continuous clicking caused by faulty ignition wiring
• Helps eliminate burns that won't light or require multiple attempts to ignite

• One igniters and harness assembly

• Disconnect electrical power and shut off gas supply before starting
• Handle ceramic/porcelain igniters gently; they are brittle and can break if dropped or flexed
• Verify appliance compatibility before installation using model lookup
• After installation, restore power/gas and test all burners for proper ignition

This gas valve assembly controls and regulates gas flow to the oven/range burner for consistent ignition and stable heat. Replacing a failed valve restores proper fuel delivery and helps the appliance heat reliably. What it does:

• Regulates gas flow to the burner and works with the ignition system to allow safe ignition
• Opens and closes gas passages per control input to control oven/range heating
• A faulty valve can cause burners or oven not to light, weak or no flame, or intermittent heating
• Designed as a direct-replacement assembly for safe, reliable operation when installed correctly

• One gas valve assembly

• Turn off the gas supply and electrical power before attempting any service
• Gas connections must be leak-tested after installation per local codes
• Installation may require basic appliance disassembly and proper sealing of fittings

This gas valve controls fuel flow to the range or oven burners so the appliance lights and maintains proper flame. Replacing a faulty valve restores normal heating and burner operation for safe, reliable cooking. What it does:

• Regulates gas flow to oven and/or surface burners for ignition and flame control
• Stops gas flow when the burner is turned off or the safety system shuts down
• Helps resolve symptoms like burners or oven not lighting or not producing heat
• Can address intermittent ignition or failure to maintain a steady flame

• Shut off the appliance power and the gas supply before starting work
• Only install the exact part number for your appliance
• Connections must be tightened and tested for leaks
• Do not modify the valve or wiring; follow all local codes and manufacturer instructions

This replacement gas valve controls gas flow for the oven and/or burners so the appliance heats reliably and responds to controls. Fits specific GE gas ranges and ovens — replace a failed valve to restore safe operation. What it does:

• Regulates gas flow to the oven/burner when the range control signals heat demand
• Enables the oven or burner to ignite and maintain temperature
• Common symptom: oven or burner will not heat or stay lit
• Common symptom: control clicks but no gas flow or ignition
• Designed to work with compatible gas cooktop and oven control systems

• Turn off gas supply and unplug the appliance before servicing
• After installation, check all gas connections for leaks with a safe, approved leak-test method
• Do not use the appliance if you detect a gas odor; ventilate area