Jgp35wea8ww Parts

This control knob seal fits around the control shaft opening on your range or cooktop to close the gap under the knob. It helps block spills and debris from entering the control area and keeps the console looking clean and finished.

• Forms a barrier between the knob/valve shaft and the control surface
• Helps prevent liquids, crumbs, and grease from seeping into the control cavity
• Restores a tidy appearance; replaces cracked, shrunken, or missing seals
• Typical signs of wear: visible damage, gaps around the knob, or residue appearing beneath the panel after spills

• Disconnect power and, if applicable, shut off gas; allow the appliance to cool
• Pull the knob straight off the shaft and remove the old seal
• Clean the area; seat the new seal flat around the shaft—avoid side pressure on the valve stem
• Reinstall the knob and verify smooth operation and proper seal seating

This economic nut is a small replacement fastening nut that restores secure connections for appliance components. It replaces worn or missing hardware so panels and internal parts stay firmly seated and reduce vibration. What it does:

• Secures components and panels by threading onto the matching stud or bolt to hold assemblies in place
• Prevents loose or rattling panels and hardware caused by a missing or damaged nut
• Restores proper fit for user-accessible panels and internal brackets where this nut is specified
• Simple hardware replacement to regain stable mechanical connections

• Disconnect power and water (if applicable) and follow basic electrical safety before servicing the appliance
• Use the matching size wrench or socket; thread-on by hand first to avoid cross-threading, then snug—do not overtighten
• Inspect mating stud or bolt for damage; replace hardware that is stripped, corroded, or deformed

This genuine OEM GE replacement is compatible with additional Hotpoint, RCA and Kenmore gas range models.

The Black Knob Assembly is an OEM part for GE cooktops. The knob allows for precise adjustment of temperature and mode settings, making it crucial for the accurate operation of your oven or range.

Causes of a bad knob assembly can include physical damage, such as cracking or melting, wear from regular use, or internal failure that prevents the knob from engaging with the appliance's control mechanism.

Symptoms of a bad Black Knob Assembly include:

• Difficulty in turning the knob or a lack of resistance
• The knob not staying in place or feeling loose
• Inability to accurately set or change temperature and mode settings
• Visible wear or damage to the knob's surface

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Grate Assembly is an OEM replacement part for GE cooktops. It provides a stable and sturdy surface for your cookware while allowing heat to evenly distribute across the burner. It is constructed to withstand high heat, the wear of everyday cooking, and provide reliable support for your pots and pans.

Symptoms of a faulty cooktop grate assembly include:

• Visible cracks or fractures on the grates
• Warped or uneven surface
• Unstable or wobbly support for cookware

A bad cooktop grate assembly can occur due to wear and tear over time, accidental damage, or exposure to high heat. If you notice any signs of damage, such as cracks, warping, or weakened support, it may be time to replace the old or damaged cooktop grate assembly with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

The Medium surface burner base is an OEM part for GE ranges. It serves as the base for the surface burners, covering and protecting the burner cavities.

Causes of a bad surface burner base include warping or deformation from high heat over time, cracks or breaks from impact damage, or corrosion from liquid spills or grease accumulation.

Symptoms of a bad surface burner base include:

• Burners no longer sitting flush or securely on the cooktop surface
• Excessive air gaps around the burners allowing gas/flames to escape
• Difficulty cleaning due to liquid leaks into the burner cavities
• Visible cracks, breaks, or deformities in the material

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

Replacement fastener used to secure appliance components. If a screw is missing or damaged, panels and brackets can loosen or rattle. Installing a new screw restores a tight fit and helps keep parts properly aligned.

• Fastens panels, brackets, or internal components as designed for the model
• Replaces missing, stripped, or corroded hardware
• Helps reduce vibration/rattling and restores proper fit
• Maintains alignment and a secure assembly after service

• Disconnect power; shut off gas if applicable before servicing
• Support components while removing/installing fasteners
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Replace all required screws in a location for even clamping and proper fit

This is a knob assembly that is used on many GE cooktops. It is made of a white plastic material. The knob assembly sits on the right side of the cooktop. The purpose of the knob is to turn the heat on at one of the burners on the cooktop. It is also used to change the level of heat on a burner. In some cases, the knob assembly can be damaged, lost, or broken. This will make it more difficult to alter the heat on the cooktop.If the knob is not working or has been lost, it will need to be replaced. This is a quick repair that requires no tools other than a screwdriver. Make sure the cooktop is turned off and cool to the touch to prevent injury. Pry the knob off using a screwdriver or gloves. Place the new knob assembly in the same location and press firmly to seat it.This knob assembly is sold as an individual item. It is a genuine OEM replacement part that is sourced directly from the manufacturer. The part is designed to be used with cooktops manufactured by GE.

This small V2 inlet jet directs water flow to the dispenser/ice-making area so the appliance fills and forms properly. It restores correct water routing for consistent filling and helps reduce weak or misshapen ice or slow dispensing. What it does:

• Channels water to the ice maker/dispenser so the correct amount reaches the fill area.
• Helps ensure uniform ice formation and consistent dispenser flow.
• Can resolve symptoms like weak/slow dispensing, underfilled ice trays, or uneven ice cubes.
• Works as the small replacement nozzle where the original inlet jet is worn or blocked.

• One small V2 inlet jet

• Disconnect power and shut off the water supply before beginning work.
• Access may require removing inner panels or the ice maker/dispenser housing; follow your model's service instructions.
• Inspect the seat and surrounding fittings for debris or damage before installing; replace other damaged components as needed.

This infinite switch harness assembly provides the electrical connection between the range/stovetop infinite (surface) switch and the cooktop element, restoring proper power control to a single surface burner. What it does:

• Connects the infinite control switch to the bake/element terminal to allow variable heat settings
• Replaces damaged, burnt, or loose wiring that causes intermittent or no power to a surface burner
• Helps stop sparking, arcing, or failed temperature control linked to a faulty harness connection
• Restores reliable electrical contact for safe burner operation when the switch works but the burner does not

• One infinite switch harness assembly

• Power off and unplug the appliance or shut off the breaker before accessing internal wiring
• Verify switch and element condition; replace only the parts explicitly shown to be faulty
• Handle wires and terminals carefully to avoid bending or breaking connector tabs

This 1/4-20 screw secures panels, brackets, and other assemblies in your appliance. It restores a tight, reliable hold when an original fastener is missing, stripped, or corroded.

• Fastens components that require a 1/4-20 threaded screw
• Helps keep panels and assemblies aligned and rattle-free
• Direct replacement for worn, rusted, or lost hardware
• Common symptoms: loose or vibrating parts, misaligned brackets, missing fastener

• Disconnect power; turn off gas supply before servicing
• Allow the appliance to cool; wear gloves and eye protection
• Start threads by hand to avoid cross-threading; use the correct driver/tool
• Tighten snugly—do not overtighten to prevent stripping or damage

This gas valve assembly controls and regulates gas flow to the oven/range burner for consistent ignition and stable heat. Replacing a failed valve restores proper fuel delivery and helps the appliance heat reliably. What it does:

• Regulates gas flow to the burner and works with the ignition system to allow safe ignition
• Opens and closes gas passages per control input to control oven/range heating
• A faulty valve can cause burners or oven not to light, weak or no flame, or intermittent heating
• Designed as a direct-replacement assembly for safe, reliable operation when installed correctly

• One gas valve assembly

• Turn off the gas supply and electrical power before attempting any service
• Gas connections must be leak-tested after installation per local codes
• Installation may require basic appliance disassembly and proper sealing of fittings