Jgp5030slss Parts

This genuine OEM GE replacement is compatible with additional Hotpoint, RCA and Kenmore gas range models.

The Medium surface burner base is an OEM part for GE ranges. It serves as the base for the surface burners, covering and protecting the burner cavities.

Causes of a bad surface burner base include warping or deformation from high heat over time, cracks or breaks from impact damage, or corrosion from liquid spills or grease accumulation.

Symptoms of a bad surface burner base include:

• Burners no longer sitting flush or securely on the cooktop surface
• Excessive air gaps around the burners allowing gas/flames to escape
• Difficulty cleaning due to liquid leaks into the burner cavities
• Visible cracks, breaks, or deformities in the material

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

The Center Grate is an OEM part for GE gas ranges and cooktops. This center grate sits between the front burners and serves as a cooking surface. The grate is designed with an open design that allows heat from the burners to circulate up while safely containing hot cookware.

Causes of a bad center grate can include warping or deformation from high heat, cracks or breakage from mishandling heavy pots and pans, or scratches and wear over time.

Symptoms of a bad center grate include:

• Difficulty fitting pots and pans between the grate bars
• Food or liquids dripping below the grate
• Loose or unstable grate that moves during cooking
• Safety concerns with exposed burner flames

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

A complete igniter and wiring harness assembly designed to replace a factory igniter setup on gas ranges and ovens. Restores ignition reliability by providing a matched igniter element with its attached harness for a direct plug-in replacement. What it does:

• Heats the igniter element to ignite the oven/burner gas for normal operation.
• Provides the factory-style wiring harness to ensure correct electrical connections.
• Common symptom: oven or burner fails to light or the igniter does not glow.
• Common symptom: extended ignition delay or intermittent ignition.

• Turn off electrical power and shut off the gas supply before starting any repair.
• Handle the igniter element carefully; the ceramic/glass surface is fragile—do not touch the glowing surface with bare hands.
• Ensure all connectors are fully seated and wiring is routed away from hot components.

This left surface burner grate replaces a damaged or missing left cooktop grate, restoring a stable cooking surface and even pot support. It's a direct-fit replacement for the left-side burner on compatible gas ranges. What it does

• Supports cookware over the left surface burner for safe, stable cooking.
• Maintains proper clearance and alignment so flames contact the cookware, not the grate.
• Replaces cracked, chipped, warped or unstable grates that cause pots to wobble.
• Helps prevent pans from sliding toward adjacent burners or controls.

• One left surface burner grate (left).

• Allow the range to cool and burners to be off before removing or installing the grate.
• This part is typically lift-off; align with burner head and set into position—no special tools required.
• Clean the cooktop and burner heads before installation to ensure proper seating.
• Check burner caps and ports for proper positioning and debris after installation.

The GRATE (Right) is an OEM component specifically designed for GE gas cooktops. This grate sits over one of the cooktop burners and serves as a durable, heat resistant surface for cooking pots and pans. 

Symptoms of a bad grate include:

• Uneven or inefficient heating of cookware 
• Hot spots under pans that cause food to burn 
• Difficulty moving cookware smoothly across the surface
• Appearance of cracks, holes, or imperfections on the grate itself

Causes of a bad grate can include warping or discoloration from continued heat exposure, as well as scratches or defects that degrade its heat distribution properties. 

This OEM GE part is also compatible with Hotpoint, RCA and some Kenmore models.

This small V2 inlet jet directs water flow to the dispenser/ice-making area so the appliance fills and forms properly. It restores correct water routing for consistent filling and helps reduce weak or misshapen ice or slow dispensing. What it does:

• Channels water to the ice maker/dispenser so the correct amount reaches the fill area.
• Helps ensure uniform ice formation and consistent dispenser flow.
• Can resolve symptoms like weak/slow dispensing, underfilled ice trays, or uneven ice cubes.
• Works as the small replacement nozzle where the original inlet jet is worn or blocked.

• One small V2 inlet jet

• Disconnect power and shut off the water supply before beginning work.
• Access may require removing inner panels or the ice maker/dispenser housing; follow your model's service instructions.
• Inspect the seat and surrounding fittings for debris or damage before installing; replace other damaged components as needed.

The Bridge Bumper is an OEM part for GE electric cooktops. It is a protective bumper located at the bridge that connects the front control panel area to the cooking surface. The bumper acts as a safeguard, cushioning any potential impact to the underside of the control panel. 

Causes of a bad bridge bumper include normal wear and tear, exposure to heat or moisture during cooking, or tears from impact. 

Symptoms of a bad bridge bumper include:

• Visible damage or deterioration of the bumper material  
• Exposure of raw edges that were previously covered
• Increased risk of scratches or damage to the control panel surface

This GE replacement part is also compatible with some Hotpoint, General Electric, and Kenmore electric cooktop models. Protect your appliance with this genuine OEM bridge bumper to safeguard the control panel from accidental impact.
 

This switch harness assembly connects the oven control and selector switches to the appliance's wiring, restoring reliable signal and power routing for oven functions. Designed to replace a damaged or worn harness quickly and safely. What it does:

• Routes power and control signals between the oven control/switches and main wiring
• Replaces frayed, broken, or corroded wiring that can cause intermittent or failed controls
• Common symptom fixes: oven not heating, selector/temperature controls unresponsive, or erratic oven behavior
• Fits behind the control panel to maintain proper switch alignment and electrical connection

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Route and secure wiring as OEM routing to prevent pinching or contact with hot parts

This gas valve controls flow of natural gas to a range burner assembly, restoring proper ignition and flame control for safe cooking. It replaces a failed or leaky valve so the appliance can heat correctly. What it does:

• Regulates gas flow to the burner for consistent ignition and flame height
• Stops gas flow when the control is off to prevent unwanted burning
• Commonly used when the burner won't light, flame is weak/uneven, or the valve leaks
• Works with the range's existing manifold and control system to restore normal operation

• One replacement gas valve

• Shut off gas supply and electrical power before starting any work
• Inspect fittings and seals; use proper thread sealant for gas connections where required
• Test for leaks and proper burner operation after installation

This igniters and harness assembly replaces a damaged spark igniter and its wiring to restore reliable ignition for gas ovens and ranges. It provides the ignition spark and a pre-wired harness for a direct replacement. What it does:

• Delivers spark to the burner igniters so gas burners light reliably
• Replaces cracked, broken, or non-sparking igniters and worn wiring
• Stops intermittent or continuous clicking caused by faulty ignition wiring
• Helps eliminate burns that won't light or require multiple attempts to ignite

• One igniters and harness assembly

• Disconnect electrical power and shut off gas supply before starting
• Handle ceramic/porcelain igniters gently; they are brittle and can break if dropped or flexed
• Verify appliance compatibility before installation using model lookup
• After installation, restore power/gas and test all burners for proper ignition

Replacement center gas valve that controls gas flow to the oven/burner assembly, restoring proper fuel delivery and ignition for safe, consistent heating. Fits compatible GE gas ranges and ovens when this valve is the failed component. What it does:

• Regulates gas flow to the oven's center burner so the unit can ignite and maintain temperature
• Works with the range's ignition system to open/close fuel supply on demand
• Common failure symptoms: oven or center burner won't light, uneven or no heating, repeated ignition cycling

• Turn off gas supply and electrical power before starting any work
• Match wiring and mounting to the original valve—do not force connections or modify parts
• After installation, check for proper ignition, operation, and gas-tight seals per OEM guidance

This gas valve (LF) controls gas flow to the burner for safe, consistent ignition and heating—restoring proper fuel delivery so the cooktop or oven reaches and maintains set temperatures. What it does:

• Regulates gas flow to the burner assembly for controlled ignition and heating.
• Works with the appliance's safety and ignition systems to allow safe operation.
• Commonly replaced when burners fail to light, the oven won't heat, or heat is intermittent.
• Enables reliable on/off control of gas when commanded by the appliance controls.

• Turn off electrical power and shut off the gas supply before beginning service.
• After installation, check all gas connections for leaks and verify proper operation.
• Follow all local codes and the appliance manufacturer's installation instructions.