Jgp5036sl2ss Parts

A complete igniter and wiring harness assembly designed to replace a factory igniter setup on gas ranges and ovens. Restores ignition reliability by providing a matched igniter element with its attached harness for a direct plug-in replacement. What it does:

• Heats the igniter element to ignite the oven/burner gas for normal operation.
• Provides the factory-style wiring harness to ensure correct electrical connections.
• Common symptom: oven or burner fails to light or the igniter does not glow.
• Common symptom: extended ignition delay or intermittent ignition.

• Turn off electrical power and shut off the gas supply before starting any repair.
• Handle the igniter element carefully; the ceramic/glass surface is fragile—do not touch the glowing surface with bare hands.
• Ensure all connectors are fully seated and wiring is routed away from hot components.

This small V2 inlet jet directs water flow to the dispenser/ice-making area so the appliance fills and forms properly. It restores correct water routing for consistent filling and helps reduce weak or misshapen ice or slow dispensing. What it does:

• Channels water to the ice maker/dispenser so the correct amount reaches the fill area.
• Helps ensure uniform ice formation and consistent dispenser flow.
• Can resolve symptoms like weak/slow dispensing, underfilled ice trays, or uneven ice cubes.
• Works as the small replacement nozzle where the original inlet jet is worn or blocked.

• One small V2 inlet jet

• Disconnect power and shut off the water supply before beginning work.
• Access may require removing inner panels or the ice maker/dispenser housing; follow your model's service instructions.
• Inspect the seat and surrounding fittings for debris or damage before installing; replace other damaged components as needed.

The Bridge Bumper is an OEM part for GE electric cooktops. It is a protective bumper located at the bridge that connects the front control panel area to the cooking surface. The bumper acts as a safeguard, cushioning any potential impact to the underside of the control panel. 

Causes of a bad bridge bumper include normal wear and tear, exposure to heat or moisture during cooking, or tears from impact. 

Symptoms of a bad bridge bumper include:

• Visible damage or deterioration of the bumper material  
• Exposure of raw edges that were previously covered
• Increased risk of scratches or damage to the control panel surface

This GE replacement part is also compatible with some Hotpoint, General Electric, and Kenmore electric cooktop models. Protect your appliance with this genuine OEM bridge bumper to safeguard the control panel from accidental impact.
 

The Left hand Grate is an OEM part for GE gas ranges. Located directly above the left burner, this small grate performs an important role. 

Causes of a bad left grate can include cracks or nicks developing over many uses. Scratches from metal pots and pans scraping the surface also worsen with time and harsh cleaning.

Symptoms of a bad range left grate are:

• Sections appearing fragile or loose from their mount 
• Open holes allow small items to contact the open burner   
• Visible damage detracting from aesthetics of the cooktop

This genuine GE replacement grate is compatible with Hotpoint, RCA and select Kenmore models.

The Center Grate is an OEM part for GE gas cooktops. Located directly above the center burner, this small grate performs an important role. 

Causes of a bad center grate can include cracks or nicks developing over many uses. Scratches from metal pots and pans scraping the surface also worsen with time and harsh cleaning.

Symptoms of a bad center grate are:

• Sections appearing fragile or loose from their mount 
• Open holes allow small items to contact the open burner   
• Visible damage detracting from aesthetics of the cooktop

This genuine GE replacement grate is compatible with Hotpoint, RCA and select Kenmore models.

This switch harness assembly connects the oven control and selector switches to the appliance's wiring, restoring reliable signal and power routing for oven functions. Designed to replace a damaged or worn harness quickly and safely. What it does:

• Routes power and control signals between the oven control/switches and main wiring
• Replaces frayed, broken, or corroded wiring that can cause intermittent or failed controls
• Common symptom fixes: oven not heating, selector/temperature controls unresponsive, or erratic oven behavior
• Fits behind the control panel to maintain proper switch alignment and electrical connection

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Route and secure wiring as OEM routing to prevent pinching or contact with hot parts

Replacement center gas valve that controls gas flow to the oven/burner assembly, restoring proper fuel delivery and ignition for safe, consistent heating. Fits compatible GE gas ranges and ovens when this valve is the failed component. What it does:

• Regulates gas flow to the oven's center burner so the unit can ignite and maintain temperature
• Works with the range's ignition system to open/close fuel supply on demand
• Common failure symptoms: oven or center burner won't light, uneven or no heating, repeated ignition cycling

• Turn off gas supply and electrical power before starting any work
• Match wiring and mounting to the original valve—do not force connections or modify parts
• After installation, check for proper ignition, operation, and gas-tight seals per OEM guidance

A small machine screw used to fasten appliance panels and components. This 10-32 x 7/16 screw secures assemblies and replacement parts so panels and brackets stay properly mounted during normal operation. What it does:

• Fastens small panels, brackets, and assemblies that use a 10-32 thread
• Replaces missing or stripped mounting screws to stop rattling and loose parts
• Helps maintain proper alignment of fitted components
• Used where a short 7/16" length is required for a flush fit

• Unplug the appliance before starting any repair
• Use the correct sized screwdriver or nut driver for 10-32 threads
• Hand-start the screw to avoid cross-threading, then snug—do not overtighten
• If threads are damaged, replace with correct fastener; avoid forcing the screw

This igniters and harness assembly replaces a damaged spark igniter and its wiring to restore reliable ignition for gas ovens and ranges. It provides the ignition spark and a pre-wired harness for a direct replacement. What it does:

• Delivers spark to the burner igniters so gas burners light reliably
• Replaces cracked, broken, or non-sparking igniters and worn wiring
• Stops intermittent or continuous clicking caused by faulty ignition wiring
• Helps eliminate burns that won't light or require multiple attempts to ignite

• One igniters and harness assembly

• Disconnect electrical power and shut off gas supply before starting
• Handle ceramic/porcelain igniters gently; they are brittle and can break if dropped or flexed
• Verify appliance compatibility before installation using model lookup
• After installation, restore power/gas and test all burners for proper ignition