Jgp636bev Parts

Some parts shown may not be for your model. To see parts for your model only, select it from "Matching Model Numbers" list on the left.

Genuine Ge part

Screw

By: Ge

Part Number: WZ4X44D

Package of 12

$48.57

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Ge part

This replacement screw secures appliance panels and components to restore proper fit and prevent rattling or movement. Use it to replace a missing or stripped fastener for a snug, durable connection. What it does:

Secures trim, panels, brackets, or internal components in place
Restores proper alignment and reduces vibration or noise
Replaces missing, worn, or damaged screws that cause loose parts
Compatible with the original mounting point and fastening method

What's included: One replacement screw Install notes:

Turn off power and unplug the appliance before starting any repair
Use the correct driver to avoid stripping the head; match thread engagement fully
If threads are damaged, inspect the mating part and replace or repair as needed

$7.37

Compare At:: $8.36
You Save:: $0.99

IN STOCK

Ships Monday Guaranteed

Add to Cart

Genuine Ge part

Screw

5.0 (1)

By: Ge

Part Number: WB1X1424D

Package of 12

Do-It-Yourself Stories from Customers like You Igniter did not work plus the bowls were cruddy and discolored from close to 20 years of use John Y. • Rowland Heights , CA • April 16, 2017

Removed bowls and replaced with new ones. Appliance Parts Pros shipping was lightning fast. I was extremely happy with my replacing parts. Will definitely buy from them in the future. Read more

$6.95

Compare At:: $8.36
You Save:: $1.41

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Ge part

Valve Screw Gasket

By: Ge

Part Number: WB2X9008

$4.95

Compare At:: $6.02
You Save:: $1.07

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Ge part

Tube Assembly - Lt Rear

By: Ge

Part Number: WB28K5083

$73.95

Compare At:: $87.26
You Save:: $13.31

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Ge part

Tube Assembly - Center

By: Ge

Part Number: WB28K5084

$58.32

Compare At:: $69.98
You Save:: $11.66

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Ge part

Clip - Range Cord

By: Ge

Part Number: WB2X9106

$6.35

Compare At:: $6.99
You Save:: $0.64

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Ge part

Burner Box Bottom

By: Ge

Part Number: WB64K5095

$89.95

Compare At:: $99.93
You Save:: $9.98

Out Of Stock

Usually ships within 4 - 14 days

Add to Cart

Genuine Ge part

Surface Burner Valve Switch (Spark Ignition)

5.0 (2)

By: Ge

Part Number: WB24K5078

This surface burner valve switch mounts on the gas valve stem and signals the spark module when you turn the knob. Replacing a faulty switch restores consistent clicking and reliable ignition on the affected cooktop burner. What it does:

Mounts to the surface burner gas valve and closes the ignition circuit when the knob is turned to Lite
Sends power to the spark module to create the clicking needed to ignite the flame
Symptoms may include: burner won't spark, intermittent ignition, continuous clicking with knobs off, or a burner lights only when another knob is turned

What's included:

One valve switch

Install notes:

Disconnect electrical power and shut off gas supply; allow the cooktop/range to cool
Remove the knob and front panel or manifold cover to access the valve area
Note wire positions, transfer the wires to the new switch, and secure it on the valve stem in the same orientation
Reassemble, restore power and gas, then test burner ignition

This part fixes the following symptoms

Won't start

Do-It-Yourself Stories from Customers like You Clicking from ignitor mode would not stop after burner lit Jeffrey Maclachlan V. • Nederland , CO • September 03, 2017

Turned out the little switches on the knob shaft had corroded and were staying on. There was constant continuity showing with an ohm meter. Replacing the switches was very easy (always disconnect power to the unit before servicing). Bought a new ignitor module as a backup as they do go out of production after 10 years or so- another cheap and easy fix if needed in the future. Read more

Genuine Ge part

Spark Electrode Mounting Clip

5.0 (4)

By: Ge

Part Number: WB1K56

This small metal clip secures the surface burner spark electrode to its bracket or burner base, holding the tip at the proper gap for reliable ignition. Replace a missing, bent, or corroded clip to help restore consistent sparking.

Holds the surface burner spark electrode firmly in position near the burner head
Maintains correct alignment and gap so the igniter can spark to the burner
Can help with delayed ignition, intermittent sparking, or a burner that won't light
Typical signs include a loose/wobbly electrode, visible damage, or a missing clip

What's included: 1 mounting clip Install notes:

Disconnect power and shut off gas before servicing
Lift the cooktop or remove burner components to access the electrode; note clip orientation
Transfer the electrode into the new clip and seat the clip securely in its bracket or base
Avoid stressing the electrode's ceramic insulator; verify the tip is aimed at the burner rim and test ignition

Do-It-Yourself Stories from Customers like You Gas burner would not start Eileen L. • Hebron , MD • August 24, 2019

A new electrode and the great schismatics on your website. The only thing that took some time was removing the 2 screws in burner pan. Once removed it was very easy to fix. Read more

Genuine Ge part

Burner Bowl Small

5.0 (5)

By: Ge

Part Number: WB31K5078

Color: Black

Do-It-Yourself Stories from Customers like You Years of crusted on debris in burner bowls Calvin W. • Sunnyvale , CA • August 05, 2016

Repair was really simple. Removed power from stove to insure igniter would not fire. Removed parts to gain access to 2 screws securing burner bowls to stove top. Removed screws. Lifted up burner bowl and disconnected igniter wire from igniter and removed old burner bowl seal. Transferred igniter to new burner bowl and installed new burner bowl seal.Connected igniter wire and secured burner bowl assembly to stovetop with screws. Replaced parts removed earlier. Repeated process for each burner,... Read more

Genuine Ge part

Spark Module

4.8 (4)

By: Ge

Part Number: WB13K5079

This part fixes the following symptoms

Won't start

Do-It-Yourself Stories from Customers like You Clicking from ignitor mode would not stop after burner lit Jeffrey Maclachlan V. • Nederland , CO • September 03, 2017