Jgs 8850Cds02 Parts

This decorative overlay restores the appliance's front/console finish with the Dark Dorian RC15 color, improving appearance and hiding wear. It's a factory-style cosmetic panel designed to match the original finish. What it does:

• Replaces a faded, scratched or damaged decorative finish on the console/front
• Restores a uniform Dark Dorian RC15 appearance to the appliance exterior
• Covers cosmetic imperfections without major repair or repainting
• Maintains original look and style intended by the manufacturer

• Follow OEM disassembly steps for safe access; power off the appliance before starting
• Remove any old adhesive or mounting remnants and clean the surface before fitting
• Align carefully and press into place; use only manufacturer-recommended adhesives or clips if required

This valve lockout mounting clip secures the appliance's gas valve actuator to help prevent unintended valve movement and ensure consistent operation. It replaces a worn or broken lockout clip to restore reliable valve positioning. What it does:

• Secures the gas valve actuator or linkage to keep the valve in its intended position
• Helps stop intermittent or loose valve movement that can cause inconsistent ignition or burner operation
• Restores proper mechanical alignment after the original clip has cracked, bent, or broken
• Small replacement part used where a damaged lockout clip prevents stable valve function

• One valve lockout mounting clip

• Disconnect power and shut off gas supply before servicing; follow all safety precautions
• Inspect adjacent fasteners and actuator for damage; replace any additional damaged parts as needed
• Basic hand tools typically required; handle small plastic clips carefully to avoid breakage

The Oven Control is an OEM component specifically designed for GE ranges. This integrated control board directs all functions within the main oven cavity, from bake and broil modes to precise temperature regulation.

Causes of failure can be prolonged exposure to heat cycling and moisture deteriorating circuits over time. Physical impact during cleaning or servicing may also damage delicate electronics.

Symptoms include: 

• Inability to select or reliably maintain cooking modes and temps
• Erratic oven performance such as short cycling  
• Fault codes or failure detection messages appearing
• Responses from control buttons becoming sluggish

This genuine GE part is compatible with Hotpoint and select Kenmore wall ovens as well.

This oven orifice spud secures the oven orifice and directs gas to the oven burner for proper ignition and steady flame. It restores safe, consistent gas flow for reliable oven heating. What it does:

• Holds the oven orifice in the correct position for accurate gas delivery to the burner
• Helps maintain steady flame and proper combustion in the oven cavity
• Can resolve issues like weak or uneven oven heating when damaged or misaligned
• Works as a small-mounting component in the oven manifold assembly

• One oven orifice spud

• Inspect surrounding components (orifice, burner, manifold) and replace any damaged parts
• Turn off gas supply and electricity before starting work; follow appliance safety procedures
• Tighten to OEM torque; avoid overtightening which can damage threads

Color: Stainless

This replacement pan-head screw is used in refrigerators to fasten panels, brackets, and covers so they stay tight and properly aligned. Replace a missing or damaged screw to restore a solid, rattle-free fit.

• Secures interior/exterior panels, brackets, trim, and covers
• Replaces missing, stripped, or corroded hardware
• Helps maintain proper alignment of attached components

• Disconnect power before servicing; shut off water if working near water lines
• Match location to the original fastener and start threads by hand to avoid cross-threading
• Do not overtighten, especially into plastic or thin sheet metal

• Thread size: #8-18 (type AB)
• Length: 1/2 inch
• Head style: Pan head, Phillips drive

This burner baffle is a replacement heat shield that protects the range cooktop and burner assembly from spills and directs heat for more consistent cooking. Durable design helps keep burner components cleaner and working properly. What it does:

• Shields burner components from drips, spills, and food debris that can cause clogging or uneven flame
• Helps channel heat from the burner for more consistent surface heating
• Reduces direct exposure of internal parts to corrosive residues, extending component life
• Can stop rattling or misalignment caused by a damaged or bent baffle

• Disconnect gas supply and electrical power and allow the range to cool fully before servicing
• Handle edges carefully; baffle may have sharp metal edges or be spring-tensioned into place
• Installation typically requires removing grates and lift-off parts to access the burner area; follow OEM instructions

This orifice spud directs gas flow into the burner for consistent ignition and flame control. It restores proper burner performance so cooking heats evenly and burners light reliably. What it does:

• Seats the burner orifice to control gas flow to the burner
• Helps maintain a steady, even flame for consistent cooking
• Can resolve weak or uneven flames and burners that struggle to light
• Works as the sealed interface between the gas manifold and burner tube

• One orifice spud

• Turn off the gas supply and disconnect power before servicing
• Inspect surrounding seals and gaskets for damage and replace if necessary
• Use basic hand tools; avoid overtightening to prevent damage

This replacement power cord restores safe electrical connection for ranges and ovens, allowing the appliance to receive mains power for normal cooking. Durable jacket and terminals provide a dependable link to your home's supply. What it does:

• Supplies mains power to the appliance via the terminal block or connector.
• Replaces frayed, cut, or heat-damaged cords that risk loss of power or electrical hazards.
• Helps stop intermittent power, sparking at the cord, or no-heat symptoms when the cord is the fault.
• Provides a secure connection when properly installed with the appliance's strain relief.

• Disconnect house power at the breaker before inspecting or replacing the cord.
• Remove the appliance from the installation gap as needed to access the terminal block; follow your appliance manual.
• Secure the cord with the existing strain relief and tighten all terminal screws; loose connections can cause arcing.

This door liner is the oven's inner door panel that helps protect the door cavity and support the inner glass. Replaces a damaged or worn liner to restore a clean interior surface and proper glass fit. What it does:

• Replaces the oven's inner door panel that secures the inner glass and insulation
• Restores a sealed, smooth interior door surface to help contain heat and cooking messes
• Helps eliminate rattles or misalignment caused by a cracked or bent liner
• Compatible with ovens that specify part number W10902192

• One inner oven door liner

• Refer to the oven model's service manual for step-by-step disassembly and reassembly
• Disconnect power (and gas if applicable) before starting work
• Handle the glass and liner carefully—wear gloves and eye protection to avoid cuts
• If other door components are damaged, inspect and replace them as needed for a complete repair

This replacement bezel knob restores the appearance and secure fit of a range or oven control panel. It replaces a cracked, loose, or missing knob bezel to help ensure proper knob seating and a finished look. What it does:

• Centers and secures the control knob on the appliance control panel
• Maintains correct spacing so the knob turns smoothly and seats properly
• Helps prevent debris from entering the knob shaft area
• Commonly replaced for visible cracks, breaks, or when the bezel no longer holds the knob firmly

• One bezel knob

• Disconnect power to the appliance before starting any work
• Typically aligns over the knob shaft and snaps or slides into place; avoid forcing it
• Inspect the knob shaft and surrounding trim for damage and replace if necessary

This replacement screw restores secure fastening for appliance panels and components, helping stop loose parts and rattling so controls and panels stay aligned. Use when original screws are missing, stripped, or damaged. What it does:

• Secures panels, trim, control boards, brackets, or components to the appliance frame
• Stops rattling, vibration noise, and loose or misaligned parts caused by missing or damaged fasteners
• Replaces stripped, corroded, or missing screws to restore proper fit and function
• Matches OEM fit and threading for straightforward hardware replacement when the correct screw is identified

• Turn off power and unplug the appliance before accessing internal components
• Use the correct screwdriver or bit to avoid stripping the head; do not force mismatched drivers
• Tighten until snug—do not overtighten, which can strip threads or crack plastic
• Keep removed hardware organized and verify the replacement screw matches the original before installation

This surface ignitor lights the burner on compatible gas cooktops and ranges, restoring reliable spark ignition for normal burner operation. Replace a broken or weak ignitor to help restore consistent ignition and safer cooking. What it does:

• Generates the spark that lights the burner when the control is turned on
• Helps ensure quick, consistent ignition and reduces repeated clicking or delayed lighting
• Commonly replaces cracked, burned, or non-sparking ignitors
• Works with the cooktop's existing valve and electronic control to initiate flame

• Always disconnect power and shut off the gas supply before removing or installing the ignitor
• Handle the ceramic and electrode tip carefully—these components are fragile and can crack if dropped
• Reuse existing mounting hardware unless replacement is specified

This glass spacer positions and cushions oven door glass to keep panels aligned and prevent direct glass-to-glass contact. Replacing a damaged spacer restores proper door fit and reduces rattling or uneven sealing. What it does

• Separates and spaces oven door glass panels to prevent rubbing and stress cracks.
• Cushions the glass to reduce vibration and noise during operation.
• Helps maintain even door alignment for a tighter closure and consistent heat containment.
• Commonly replaced when the spacer is worn, cracked, missing, or allowing glass to contact adjacent parts.

• One glass spacer

• Disconnect power to the appliance before starting any repair.
• Handle glass and the spacer with care; wear safety gloves and eye protection.
• Removal/installation typically requires partial door disassembly—retain fasteners and note orientation.
• If door glass is cracked or loose, replace damaged glass to avoid injury.