Jgs07peh1ww Parts

The Door Hinge (Right) is an OEM part for GE ranges. It acts as the pivot point that allows the right side of the range door to open and close.

Causes of a bad hinge include normal wear and tear from repeated use, accidental impacts that deform the hinge, or failure of brackets or bushings.

Symptoms of a bad right door hinge include:

• Difficulty or resistance when opening and closing the right side of the door
• Noise or squeaking coming from the hinge area  
• Visual signs of damage or bending to the hinge itself
• The right side of the door not staying firmly shut or becoming misaligned

This OEM GE replacement hinge is also compatible with Hotpoint, RCA, and select Kenmore models.

The Burner Valve Assembly 270 is an OEM part for GE gas ranges. It controls gas flow to individual burners to deliver precise heating levels.  

Causes of a bad burner valve assembly include worn rubber diaphragms, debris inside valve channels, or damage from repeated heating cycles.

Symptoms are:

• Uneven cooking temperatures across burners
• Inability to ignite or adjust certain burners  
• Fluctuations in flame height/cooking output

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore gas range models.

A surface ignitor that produces the spark needed to light gas burners on compatible ranges and cooktops. Replaces a worn or failed ignitor to restore reliable ignition and consistent burner lighting. What it does

• Creates the spark at the burner to ignite gas when the control is turned on.
• Commonly used when burners click but fail to light or when a specific burner never ignites.
• Works with the cooktop's ignition system to provide consistent, repeatable sparking.
• Fits into the burner assembly and connects to the appliance's existing wiring and mounting.

• One surface ignitor (quantity: 1)

• Disconnect power to the appliance and shut off the gas supply before starting any service.
• Handle the ignitor by the ceramic/insulated areas; avoid touching the tip with bare hands to prevent contamination or damage.
• Confirm correct fit and secure all wiring connections; test ignition on a safe flame setting after reinstalling.

This oven temperature sensor measures internal oven temperature so the control can maintain accurate cooking heat. Replacing a failed sensor restores proper temperature regulation and consistent baking and roasting results. What it does:

• Senses oven cavity temperature and sends a signal to the control board
• Helps the oven reach and maintain set temperatures for consistent cooking
• Common symptom: oven not heating to set temperature or runs too hot/too cold
• May also cause oven error codes or cycling on and off frequently

• One oven temperature sensor probe

• Disconnect power at the breaker before removing or installing the sensor
• Handle the probe gently; avoid kinking or crushing the sensing element or damaging the connector
• Route wires and secure mounting so the sensor sits in its original position inside the oven cavity

This RF orifice holder secures the right-front burner orifice in place to help maintain correct gas flow and steady ignition. It replaces a damaged or worn holder to restore reliable burner operation and flame stability. What it does:

• Secures the burner orifice so gas flows through the correct port
• Helps maintain a consistent flame for the right-front (RF) cooktop burner
• Can correct symptoms like weak, uneven, or difficult-to-light flames when the holder is damaged or loose
• Works with the burner assembly to keep the orifice aligned and sealed

• One RF orifice holder

• Turn off gas supply and electrical power before servicing the cooktop
• Remove burner cap and grate to access the orifice holder; reassemble parts in reverse order
• Do not bend or force the orifice; install straight and hand-tighten as needed

This oven door gasket assembly seals the oven door to help keep heat, smoke and odors inside the oven cavity for more even cooking and improved efficiency. It replaces a worn or damaged door seal quickly and easily. What it does:

• Forms a heat-tight seal around the oven door to reduce heat loss and improve temperature stability
• Helps prevent smoke and odors from escaping into the kitchen
• Reduces energy waste from a failing or brittle seal
• Common symptom fix: visible gaps, charred or compressed gasket, heat felt at the door edge, longer cook times or uneven baking

• One oven door gasket assembly

• Disconnect power (and gas if applicable) and allow the oven to cool completely before beginning
• Inspect the door and retainer for damage; remove old gasket per OEM instructions and fit new gasket evenly into the retainer channel
• Avoid over-stretching the gasket; ensure a continuous seal around the full perimeter

This replacement door seal restores the fridge door's airtight closure to help maintain proper cooling and reduce energy loss. Designed to fit original-style openings, it keeps cold air in and warm air out for reliable food preservation. What it does:

• Creates an airtight seal along the refrigerator door edge to maintain consistent interior temperatures
• Helps prevent frost buildup and reduces strain on the compressor by improving efficiency
• Addresses common symptoms like warm spots near the door, excess frost, or a door that won't close snugly
• Fits into the door channel and compresses when the door is closed to form a tight barrier

• Replacement may require door removal and trim manipulation; follow your model's service instructions
• Inspect the door channel and mounting flange for damage or debris before installing the new seal
• Warm the seal slightly to ease installation and ensure a uniform fit; avoid open flames or excessive heat
• Test the door for a consistent seal after installation and make any hinge/strike adjustments if needed

This replacement drawer slide restores smooth, stable movement for a refrigerator/freezer drawer. It helps the drawer open and close evenly and prevents sticking or sagging so stored items remain accessible and secure. What it does:

• Guides the drawer along its track for reliable, linear motion
• Supports drawer weight to prevent sagging or uneven travel
• Reduces sticking, jamming, or rough movement when opening/closing
• Helps drawer stay aligned and seat properly in the cabinet

• One drawer slide

• Designed to mount to the drawer/cabinet; verify left/right position before installation
• Use existing mounting hardware when possible; replace stripped or damaged screws
• Turn power off and remove food from the drawer area if working near electrical components or lights

The Insulation is an OEM part for Whirlpool ranges. It serves as the heat-resistant fiberglass insulation installed inside oven cavity walls and behind backsplash panels. 

Symptoms of damaged or degraded insulation could include:

• Uneven or inefficient heat distribution inside the oven 
• Hot and cold spots developing on bake elements over time
• Longer preheat periods are needed to reach target temperatures
• Higher energy costs from overworked heating components  

Causes may involve breaks in insulation fibers from extended heat cycling. Exposure to moisture or condensation could compromise insulation integrity as well. Physical punctures may develop from accidental impact or installing range components.

This replacement insulation works for Jenn-Air, KitchenAid, and select Kenmore oven ranges too. 

This small replacement bumper cushions and protects the appliance frame/trim where panels meet, helping reduce vibration, chipping and rattles for a cleaner, quieter fit. Ideal when the original bumper is worn, cracked or missing. What it does:

• Cushions contact between the frame/trim and adjacent panels to reduce noise and prevent damage
• Helps maintain proper panel alignment and sealing where the trim meets the cabinet
• Reduces rattling or vibration caused by loose or degraded trim pads
• Restores protective spacing that prevents chips or scratches to finished surfaces

• One frame front bumper

• Disconnect power to the appliance before starting work and follow all safety precautions
• Usually installs by pressing into a slot or onto a mounting surface after removing the trim piece; some trim removal may be required
• Inspect mating surfaces for damage or debris and clean before installing the new bumper
• Replace with the exact part number only; do not force or modify the bumper to fit

This replacement door hinge restores proper door alignment and smooth opening on compatible GE refrigerators. It provides the durable pivot point needed to keep the door seating correctly and reduce sag or binding. What it does:

• Replaces a worn or bent hinge to correct door sag and uneven gaps
• Restores smooth pivoting for easier opening and closing
• Helps ensure a proper door seal to maintain cooling performance
• Addresses symptoms like door dragging, misalignment, or rubbing

• One replacement door hinge

• Verify hinge orientation and mounting location before installation
• Support the door while removing/installing hinge hardware to prevent damage or injury
• Use appropriate tools and follow manufacturer torque recommendations if available
• Disconnect power and remove stored items from the door if work affects electrical components

This mounting bracket secures appliance components to the cabinet or chassis, restoring proper alignment and support. Designed to replace damaged or missing brackets, it helps reduce vibration and prevent parts from shifting during use. What it does

• Provides a stable anchor point for internal components or panels
• Restores proper alignment and fit between the appliance cabinet and mounted parts
• Helps reduce vibration and rattling caused by loose or broken supports
• Commonly replaced when bracket is bent, cracked, or missing

• Inspect adjacent fasteners and mounting holes; replace any stripped screws or damaged hardware
• Use appropriate tools and mounting hardware for secure installation; torque to OEM recommendation if available
• Disconnect power before working on electrical appliances and follow all safety guidelines

This orifice spud is the small gas fitting that directs fuel from the range/oven valve to the burner, helping maintain the correct gas flow for stable ignition and consistent flame control. What it does

• Seats in the gas valve or burner assembly to channel gas through the proper orifice
• Restores correct fuel flow when a damaged or clogged spud causes weak or no flame
• Helps correct symptoms like burners that won't light, low or uneven flame, or inconsistent cooking heat
• Works with the existing valve and burner components to re-establish reliable ignition

• One orifice spud

• Turn off the appliance gas supply and disconnect power before starting any work
• Remove grates and burner parts to access the valve/burner area; keep parts organized for reassembly
• Tighten to OEM torque; do not force fittings or overtighten threads

This door hinge assembly secures and guides the appliance door for reliable opening and closing, restoring proper alignment and smooth operation. Replace a worn or damaged hinge to stop sagging or uneven door movement. What it does:

• Re-establishes proper door alignment so the door seals and closes correctly
• Supports the door weight and provides a pivot point for opening and closing
• Helps eliminate sagging, rubbing, or uneven gaps around the door
• Works with the appliance's existing mounting points and fasteners

• One door hinge assembly

• Follow the appliance manufacturer's service manual for safe removal and installation
• Disconnect power (and water, if applicable) before servicing to avoid shock or other hazards
• Use proper tools and keep fasteners organized; some adjustments may be required for final alignment

This control knob replaces a worn, cracked, or missing appliance control knob to restore a positive, easy-to-grip control for selecting cycles and settings. It provides a simple push-on replacement for a damaged knob. What it does:

• Fits onto the appliance control shaft so you can change settings, temperatures, or cycles easily.
• Restores a secure grip when the original knob is cracked, loose, or spinning on the shaft.
• Helps eliminate slipping, wobble, or difficulty selecting options caused by a broken knob.
• Useful when a knob is lost or cosmetically damaged but the control shaft itself is functional.

• Disconnect power to the appliance before starting any repair.
• Most installations are push-on: align the knob with the shaft splines and press firmly until seated.
• If the knob feels loose or does not engage, verify shaft condition and spline alignment before forcing.