Jgs07peh1ww Parts

Left hand side

The Range NG High Altitude Kit is an OEM part for GE gas ranges. This high-altitude conversion kit allows the range to operate properly at elevations above 2000 feet.

Causes related to needing this kit are using the range at a high elevation without proper adjustment for decreased air pressure and oxygen levels.

Symptoms of needing this high-altitude kit include:

• Unstable or inconsistent flame during operation
• Excessive cooking times
• Incomplete combustion of gas resulting in carbon monoxide issues

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This LP high-altitude conversion kit adapts select gas cooking appliances for liquid propane use at elevation. It properly meters gas flow so burners light easily and produce clean, stable flames in thin-air conditions.

• Configures the appliance for LP operation in high-altitude installations
• Calibrates fuel delivery to maintain proper flame size and combustion
• Helps address yellow/sooty flames, flame lift, or hard-to-control simmer after conversion
• Promotes reliable ignition and even heat across burners

• Conversion affects gas type and pressure; must be performed per the manufacturer's instructions and local codes
• Shut off gas and power before service; work in a well-ventilated area away from open flames or sparks
• After conversion, leak-test all connections and adjust air shutters per model guidance if applicable
• Intended for LP high-altitude applications only; use the model-specific kit specified by the manufacturer

This left-side door hinge supports and pivots the appliance door for smooth, secure operation. Replace a bent or worn hinge to restore proper alignment and reliable latching, helping the door open and close correctly without sagging or binding.

• Provides the left-side pivot and support for the door
• Helps maintain door alignment so the latch engages properly
• Promotes smooth, controlled opening and closing
• Typical fix for a door that sags, binds, won't stay closed, or shows visible hinge damage

• Disconnect power at the breaker and allow the unit to cool before servicing; wear cut-resistant gloves
• Support the door; many designs require removing the door to access/replace the hinge—have a helper if needed
• Reinstall hardware and test door movement and latch engagement; adjust as needed

This broiler pan restores a sturdy broiling surface in your oven. It holds food for high-heat broiling while the lower tray catches drippings to help reduce smoke and keep the oven cavity cleaner.

• Provides a durable surface for broiling under the broil element or flame
• Collects grease and juices beneath the food during high-heat cooking
• Replaces pans that are missing, warped, chipped, or heavily rusted
• Helps cut down on smoke and mess from burnt-on residue on a damaged pan

• Allow the oven to cool completely before handling
• Slide the pan onto the appropriate rack position per your model's instructions; no tools required
• Use oven mitts—surfaces and edges can be hot after broiling
• If your model uses a separate broiler grid or rack, position it on top of the pan before cooking

Includes 12 screws.

Anti-tip kit.

This backsplash restores the rear trim behind a range or cooktop, protecting the wall and covering wiring openings for a clean, factory-look finish. It replaces a damaged, dented, or missing backsplash to improve safety and appearance. What it does:

• Covers the gap between the cooktop and the wall to block spills, splashes, and heat from reaching the wall surface
• Hides wiring and mounting holes for a neat, finished look
• Replaces bent, cracked, or corroded rear trim that can collect grease and grime
• Helps maintain proper clearance and original appearance of the appliance

• One single-piece backsplash

• Basic hardware and mounting locations are OEM-specific; confirm matching fasteners on arrival
• Turn off power to the appliance and move the unit away from the wall before removing or installing the backsplash
• Use care to avoid scratching the finish during installation; two people may be needed for larger ranges
• If mounting holes or brackets are damaged, replace those items before installing this backsplash

This spacer provides a precise gap for proper alignment and clearance between components, helping maintain correct part positioning for reliable operation. It's a simple replacement that restores intended spacing and reduces wear. What it does:

• Positions and separates adjoining parts to maintain correct clearance
• Helps prevent rubbing, misalignment, or binding of moving components
• Restores factory spacing after maintenance or part replacement
• Fits where the original spacer was used to support assembly alignment

• One spacer as shown

• Inspect surrounding components and mounting surfaces for damage before installing
• Remove power to the appliance and follow manufacturer service instructions
• Install in the same orientation as the original spacer and verify proper clearance
• If fasteners or adjacent parts are worn, replace them to ensure a secure fit

This oven door glass replaces a cracked or damaged glass panel to restore a safe, clear viewing area and help contain heat inside the oven cavity. It fits into the oven door assembly and lets you check cooking progress without opening the door. What it does:

• Replaces a broken, cracked, chipped or scratched oven door glass panel
• Restores a clear viewing window so you can monitor food without opening the door
• Helps maintain proper oven cavity containment when installed correctly
• Improves safety by removing damaged glass that could shatter

• Disconnect power to the appliance before starting any repair.
• Handle glass with heavy gloves and eye protection; place on a padded surface to avoid damage.
• Door removal or partial disassembly is commonly required; follow the oven manufacturer's service instructions.

This orifice holder secures the burner orifice on the right-rear gas burner so the correct gas flow is delivered for stable ignition and flame. It replaces a worn or damaged holder to restore proper burner seating and alignment. What it does:

• Holds the burner orifice in place for the right-rear gas burner
• Ensures consistent gas flow to the burner for steady flame and reliable ignition
• Helps correct symptoms like weak or uneven flame, burner that won't light consistently, or a misaligned burner cap
• Works with the burner assembly to maintain correct orifice positioning

• One right-rear burner orifice holder

• Turn off gas supply and unplug the appliance before starting any service
• Remove burner cap and grate, then unfasten the orifice holder retaining screw(s) to replace the part
• Verify correct orifice and position match before reassembly; do not force parts

This broiler slide is the oven rack support that lets the broiler pan and rack slide in and out smoothly for cooking and removal. It restores proper rack movement and helps keep broiler pans supported and stable. What it does

• Supports the broiler pan and rack so they sit level and slide smoothly
• Replaces worn or bent slides that cause racks to bind, tilt, or fall
• Reduces scraping, sticking, and uneven pan movement during use
• Restores safe access for inserting and removing broiler pans

• One broiler slide

• Disconnect power to the range before starting work; if a gas range, also shut off the gas supply
• Remove oven racks and broiler pan before replacing the slide to access mounting points
• Reuse original fasteners unless replacements are specified by the manufacturer