Jgs33wev1ww Parts

This replacement control knob restores a worn or broken factory knob so you can easily and safely set your appliance's functions. It provides a simple push-on fit to make appliance adjustments quick and reliable. What it does

• Replaces a damaged or missing control knob so settings can be selected accurately
• Restores tactile grip and clear pointer alignment for repeatable control
• Helps prevent slipping or accidental changes to selected settings
• Fits the original control shaft for correct operation when installed

• Disconnect power to the appliance before servicing to reduce shock risk
• Remove the old knob by pulling straight off the shaft; align the new knob's splines and push on until fully seated
• Verify proper seating and function before returning the appliance to normal use
• If the knob feels loose or won't engage, stop and check shaft type and part number compatibility

20 pack. Safe on all glass and ceramic surfaces.

This mounting bracket secures and supports appliance panels and internal components to keep assemblies aligned and stable during operation. It restores proper fit and prevents excessive vibration or movement in the affected area. What it does:

• Provides a sturdy attachment point for cabinet panels and internal parts
• Helps maintain correct alignment to reduce rattling and vibration
• Restores secure mounting after damage, wear, or during reassembly
• Commonly used when panels are loose, misaligned, or produce noise

• One mounting bracket

• Turn off and unplug the appliance before beginning any repairs
• Verify bracket orientation and fastener locations match the removed part
• Use the original screws or OEM-recommended fasteners; replace any stripped hardware

This orifice spud is the small metal fitting that meters gas to a cooktop or range burner, restoring proper flame size and heat control. It fits into the burner manifold to direct fuel flow for safe operation. What it does:

• Regulates gas flow to a specific burner for correct flame height and heat output
• Helps restore even or full-strength flames when a burner is weak or uneven
• Can resolve ignition difficulty or burners that won't stay lit when caused by a worn or damaged spud
• Works as a direct replacement for the corresponding burner orifice in the manifold assembly

• One orifice spud

• Turn off the appliance's gas supply and electrical power before servicing
• Use appropriate wrenches and avoid overtightening to prevent damage to threads
• After installation, check all connections for gas leaks with a soap solution; do not use an open flame

Replacement badge designed to restore the appliance's exterior appearance and factory look. This decorative emblem replaces a faded, scratched, or missing badge so the control panel or door presents a clean, branded finish. What it does:

• Replaces a worn, cracked, faded, or missing badge to restore original appearance
• Sits on the appliance front where the original emblem was located for accurate visual match
• Helps maintain a factory-fresh look after cosmetic damage or panel repair
• Sold as the individual decorative emblem; intended as a direct-fit cosmetic replacement

• Clean and fully dry the mounting area before installing to ensure proper adhesion and fit
• Align carefully with the original location; press firmly and evenly to secure the badge

Replacement center orifice holder for gas ranges and cooktops that secures the burner orifice to the valve for correct gas flow, helping restore steady ignition and consistent flame performance. What it does:

• Holds and aligns the center burner orifice with the gas valve to maintain proper fuel delivery.
• Restores correct gas flow when a center burner has a weak, uneven, or no flame.
• Replaces cracked, worn, or missing orifice holders that can disrupt burner operation.

• Turn off the gas supply and electrical power to the appliance before servicing.
• Remove grates and burner parts to access the orifice holder; align the orifice and secure by hand—avoid overtightening.
• After reinstalling, restore gas and power and confirm the burner lights and produces an even flame; if you smell gas, stop.

This electrode top and harness assembly delivers the high-voltage spark needed to ignite gas burners, restoring reliable ignition for the cooktop. It replaces worn or damaged electrodes and the attached wiring harness. What it does:

• Provides the high-voltage spark path from the spark module to the burner electrode
• Replaces cracked, corroded, or broken electrode tips that prevent ignition
• Restores proper alignment and spacing for consistent sparking at the burner
• Helps stop intermittent or no-spark symptoms when the harness or electrode is faulty

• One electrode top with attached high-voltage wiring harness

• Disconnect power to the appliance and shut off the gas supply before starting
• Avoid touching the electrode tip and wiring insulation; handle porcelain/ceramic parts carefully
• Verify electrode gap and alignment per service instructions; do not overtighten fasteners
• If ignition issues continue after replacement, test the spark module and switch components

This electronic T102 control board replaces a failed oven control assembly to restore user interface and bake/broil operations. It provides the control logic and display functions used by the range's main control. What it does:

• Replaces the oven's main electronic control to restore keypad and display operation
• Controls bake, broil, timer, clock, and other cooking cycles
• Can resolve symptoms like a blank or unresponsive display, non-functional touchpad, or oven not starting
• Works with the oven's user interface and power relays to manage heating functions

• Disconnect power at the breaker before diagnosing or replacing the control
• Handle the board by its edges and avoid static discharge; use proper ESD precautions
• Verify connections are secure and oriented correctly before restoring power

A self-tapping screw used to secure appliance panels and components, providing reliable fastening to sheet metal and plastic parts. Replaces worn or missing fasteners to restore proper fit and reduce rattling. What it does:

• Fastens panels, brackets, or trim to appliance frames and housings
• Creates its own threads in sheet metal or plastic for a secure hold
• Helps stop loose panels, vibration noise, and misaligned parts
• Commonly used where a short, durable fastener is needed

• Disconnect power and water before starting any repair
• Use the correct screwdriver or driver bit to avoid stripped heads
• Start threads carefully and avoid over-torquing to prevent damage
• Wear eye protection and gloves when working with sheet metal

This factory screw secures panels, brackets, or trim within your appliance. Replacing a missing or stripped fastener restores a tight fit, reduces vibration and rattles, and helps keep components aligned for reliable, long-term performance.

• Fastens panels, brackets, or trim to the appliance cabinet/frame
• Replaces damaged, rusted, or missing hardware
• Helps eliminate vibration noises, gaps, and loose-fitting parts
• Supports proper alignment of adjoining components

• Disconnect power; turn off gas/water supplies where applicable.
• Match to the original screw from your model's parts diagram before installation.
• Start threads by hand to avoid cross-threading; use the correct driver bit for the head.
• Tighten snugly—do not overtighten to prevent stripping threads or cracking plastic bosses.

This fitting is a small connector that joins or secures a fluid line inside the appliance, helping restore a safe, leak-free connection so water or other fluids flow where needed without escaping. What it does:

• Connects or secures a hose or tubing to an internal port so fluid can flow properly
• Helps stop leaks caused by cracked, loose, or worn fittings
• Restores a proper sealed connection when the original fitting is damaged or missing
• Works as a replacement plumbing connector used in common appliance water lines

• Fitting

• Turn off power to the appliance and shut off the water supply before starting
• Remove any retaining clips or clamps and replace the old fitting with the new one, ensuring a snug fit
• Use only the correct clamps or seals for your appliance; tighten to manufacturer guidance without over-torquing
• After installation, restore water and power, then check thoroughly for leaks during a test cycle

This glass bracket secures the oven/microwave door glass, keeping the inner glass panel aligned and stable for safe operation. It replaces worn or damaged brackets to restore proper door fit and reduce rattling. What it does:

• Secures and supports the door's inner glass panel to maintain alignment
• Prevents glass movement that can cause vibration, noise, or improper sealing
• Helps restore proper door closing and even heat retention when functioning parts are present
• Commonly replaced when bracket is cracked, bent, or missing mounting integrity

• One glass bracket

• Disconnect power to the appliance before beginning any repair
• Handle glass carefully; wear cut-resistant gloves and eye protection
• Installation typically requires partial door disassembly and removal of retaining screws—keep track of fasteners

This burner cap fits over a gas cooktop's surface burner to help direct flame for even heating and protect the burner head. It restores proper burner appearance and helps maintain efficient flame pattern for cooking. What it does:

• Covers and protects the gas burner head from spills and debris
• Shapes and stabilizes the burner flame for consistent heat distribution
• Helps prevent flame disturbance that can cause uneven cooking or clicking
• Restores a finished look to the cooktop surface

• 1 burner cap

• Turn off gas supply and ensure all surfaces are cool before handling
• Remove loose debris and set the cap on the burner head so it seats evenly
• If cap is warped or does not sit flat, inspect burner head for damage or debris
• Use only manufacturer-recommended parts and follow your appliance's service instructions

This is a genuine replacement mounting screw used to secure appliance panels and components. It restores proper fastening to reduce vibration and prevent parts from loosening during normal operation. What it does:

• Secures panels, brackets, or trim to the appliance frame
• Prevents rattling or vibration caused by loose fasteners
• Keeps wiring and small components held in place
• Helps maintain proper alignment of removable parts

• Disconnect power to the appliance before servicing
• Use the correct screwdriver or bit to avoid stripping the head
• Start threads by hand, then tighten until snug; do not overtighten
• Keep removed fasteners organized to ensure correct reassembly

This anchor tip secures the washer agitator to the transmission shaft so the agitator turns with the washer drive. Replaces a worn or damaged anchor tip to restore proper agitator engagement and reduce slipping. What it does:

• Secures the agitator to the drive shaft so the agitator rotates with the motor
• Helps prevent the agitator from slipping or spinning independently
• Commonly used when the agitator feels loose, makes grinding or clicking noises, or stops agitating
• Simple, low-profile part that works behind the agitator cap

• One anchor tip

• Disconnect power and water before starting any repair
• Remove agitator/agitator cap to access and replace the anchor tip per OEM instructions
• Inspect mating surfaces and replace any additional worn components if engagement remains poor

This replacement drawer slide restores smooth, stable movement for a freezer/refrigerator drawer. It helps the drawer open and close properly and reduces sticking or misalignment for reliable daily use. What it does:

• Replaces a worn or damaged drawer slide to restore proper tracking
• Reduces sticking, grinding, and uneven drawer movement
• Helps prevent drawer sagging and keeps contents secure
• Works with the drawer's existing rollers and mounting points

• One drawer slide assembly

• Disconnect power to the appliance before any service on electrical components
• Remove the drawer and existing slide(s) to access mounting screws; reinstall using original hardware unless replacements are provided
• Confirm left/right orientation and fit before tightening fasteners