Jgs750sefss Parts

The Oven Gasket Assembly is an OEM part for GE ranges. As the seal between the oven cavity and outer panel, this gasket plays a critical role isolating heat. 

Causes of a bad gasket can include break down from prolonged exposure to high baking and broiling temperatures. General wear and cracking develops as it expands and contracts repeatedly during each cooking cycle.

Symptoms of a bad oven gasket assembly include:

• Inefficient or uneven cooking from heat escaping around edges  
• Increased energy bills due to lost warm air 
• Audible vibrations or squeaking when the oven door is moved
• Gaps appearing where the gasket has pulled away from mounting points

This genuine GE replacement gasket is compatible with Hotpoint, RCA and select Kenmore gas ranges as well.

This silicon controlled rectifier (SCR) is an electronic switching component used on appliance control boards to regulate power to heating elements or motors, restoring proper control and operation when the SCR fails. What it does:

• Acts as a power-control switch on control boards to deliver variable current to heaters or motors
• Helps regulate on/off cycles and output under control-board commands
• Failure may cause no heat, intermittent heating, or components not running as expected
• Replacing a faulty SCR can restore consistent power control and appliance function

• Disconnect all power before servicing; risk of electric shock or damage
• Static-sensitive component—use proper ESD precautions when handling
• Replacement typically requires desoldering/soldering on the control board or replacement of the control module

This retainer is a small mounting clip that secures compatible appliance components in place to prevent movement and wear. It restores proper alignment so related parts stay seated and operate quietly and safely. What it does:

• Holds a specific component or harness firmly to the appliance frame or assembly
• Prevents rubbing, vibration noise, or parts shifting during operation
• Helps maintain correct part alignment for reliable function
• Common symptom: loose, rattling, or misaligned components where the retainer is missing or damaged

• One retainer

• Disconnect power and any fuel sources before starting work
• Inspect surrounding parts for damage before installing the retainer
• Typically installs with basic hand tools; avoid over-tightening nearby fasteners

This igniter cover is a replacement protective shield that helps protect the oven igniter from food spills and debris, extending the igniter's service life and helping the burner ignite reliably. What it does:

• Shields the oven igniter from direct contact with spills, drips and falling debris
• Helps prevent premature igniter damage that can lead to ignition problems
• Can reduce the chance of shorting or erratic ignition caused by contamination
• Matches original shape to ensure proper fit and clearance around the igniter

• Disconnect power to the appliance (and shut off gas if applicable) before servicing
• Allow the oven to cool completely and wear gloves to avoid cuts from sheet metal
• Handle the igniter and cover carefully; avoid touching the igniter surface directly
• Test appliance operation after reinstall

The Elbow 90° Asm is an OEM replacement part for GE gas ranges. It joins sections of burner piping at precise right angles, guiding fuel and air flow to burner heads.  

Causes of a bad elbow joint can be wear from years of vibrations, cracks developing from heat cycling, or accidental damage during maintenance.

Symptoms of a faulty elbow include: 

• Yellow burner flames or incomplete combustion
• Gas smell or leaks around pipes  
• Reduced heat levels from affected burners
• Premature deterioration of other components

This GE replacement is compatible with Hotpoint, RCA, and Kenmore models too.

This vent trim is a replacement trim piece that finishes the vent opening on compatible GE appliances, restoring a clean, finished appearance and helping direct airflow at the vent. It's a simple exterior part that refreshes the look and fit of the vent area. What it does:

• Covers and finishes the vent opening to restore a clean, factory appearance
• Secures the vent edge and helps maintain trim alignment
• Hides damage or wear to the original trim without altering ventilation function
• Commonly replaced when the original trim is dented, cracked, loose or missing

• Disconnect power to the appliance before beginning work and follow all safety precautions.
• Basic hand tools are typically required; handle trim carefully to avoid scratching the finish.
• Check orientation and fit against the vent opening before final fastening.
• Replace damaged or missing mounting hardware or clips with the correct OEM fasteners.

This replacement range top is the cooktop surface that supports burners and cookware, restoring a flat, stable cooking surface and improving appearance on compatible GE ranges. It replaces damaged, warped, or heavily scratched tops. What it does:

• Provides a stable, level surface for burners and cookware to sit on
• Restores proper alignment and spacing for burner assemblies
• Helps prevent heat loss or uneven heating caused by warped tops
• Improves the appliance's appearance if the original top is dented, cracked, or heavily scratched

• Turn off power and gas supply and verify the appliance is fully disconnected before starting
• Remove burner grates and elements as required to access mounting fasteners; retain all screws for reassembly
• Handle the panel carefully to avoid bending or scratching during installation

This replacement lamp cover protects and diffuses interior appliance light for even illumination and safe bulb containment. It restores a cracked, cloudy, or missing light lens to improve visibility inside the compartment. What it does:

• Protects the interior light bulb from impact, moisture, and food debris.
• Diffuses and softens the bulb's light for more even interior illumination.
• Stops rattling or falling lens issues caused by a cracked or broken cover.
• Helps prevent direct contact with the hot bulb and reduces glare.

• One lamp cover / light diffuser.

• Disconnect power or unplug the appliance before servicing to avoid electrical shock.
• Remove the old cover carefully and dispose of any broken pieces safely.
• Handle the replacement cover gently to avoid cracks; align and snap/slide into place per the original mounting.
• After installation, restore power and replace bulb if still dim or nonfunctional.

This manifold pipe assembly directs gas from the supply to the range's burners and oven, restoring proper fuel delivery for reliable ignition and even flames. Designed to replace a failed or corroded manifold in compatible gas ranges. What it does:

• Routes gas to individual burners and the oven burner so each flame can ignite and burn correctly.
• Helps restore even flame pattern when a damaged manifold causes weak or uneven flames.
• Addresses symptoms such as burners failing to light, low flame, or gas flow issues.
• Works as the main gas distribution tube between the valve assembly and burner orifices.

• One manifold pipe assembly as shown.

• Turn off the gas supply and electrical power to the appliance before starting work.
• After installation, test all connections for leaks with a soap solution or approved leak-detection method and verify proper burner ignition.
• Additional mounting hardware, gaskets, or related components may be required.