Jgss66eeles Parts

The Plunger Switch Dual is an OEM part for GE gas ranges. It is an electro-mechanical component that activates the burners and bake/broil modes when the oven door is securely closed.

Causes of failure include worn contact points, damaged wiring, or defective internal components.  

Symptoms of a bad plunger switch dual include:

• Inability to select oven cooking functions when door is closed
• Error messages related to unsafe door conditions  
• Random activation of burners with door open 
• Failure of door interlock safety feature

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore gas range models. 

This genuine OEM GE replacement is compatible with additional Hotpoint, RCA and Kenmore gas range models.

This replacement screw secures appliance components so panels, brackets, and trim stay tight and aligned. Use it to replace a missing, stripped, or rusted fastener and restore a solid, rattle-free fit in the affected assembly.

• Fastens parts to the chassis/frame or mounting brackets
• Replaces lost, damaged, or corroded hardware
• Can help address loose or vibrating panels and minor misalignment
• Maintains a secure attachment during normal operation

• Disconnect power before servicing; for gas appliances, also shut off the gas supply
• Match the screw to the original location and reuse any clips or washers if present
• Start threading by hand to avoid cross-threading; tighten snugly without overtightening
• Repair/replace damaged receiving threads or clip for proper hold

The Medium surface burner base is an OEM part for GE ranges. It serves as the base for the surface burners, covering and protecting the burner cavities.

Causes of a bad surface burner base include warping or deformation from high heat over time, cracks or breaks from impact damage, or corrosion from liquid spills or grease accumulation.

Symptoms of a bad surface burner base include:

• Burners no longer sitting flush or securely on the cooktop surface
• Excessive air gaps around the burners allowing gas/flames to escape
• Difficulty cleaning due to liquid leaks into the burner cavities
• Visible cracks, breaks, or deformities in the material

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

This small cooktop bracket secures designated components beneath the cooktop surface, keeping them properly positioned and stable. Replace a damaged or missing bracket to restore alignment and reduce movement or rattling during use.

• Provides mounting support for specific under-top components, per model design
• Helps maintain proper alignment and stability of cooktop parts
• Replace when visibly bent, cracked, or corroded

• Disconnect power; for gas models, also shut off gas and allow the unit to cool
• Remove surface components as required (grates/caps/heads for gas; elements/panels for electric) to access under the top
• Lift or remove the cooktop as directed in your model's service information and secure the new bracket with existing hardware
• Reassemble, verify alignment, and for gas units check for leaks if any gas connections were disturbed

This bake burner is the oven's primary bake flame assembly, restoring proper heat for even baking and roasting. Replace a damaged or corroded burner to regain reliable oven temperatures. What it does:

• Provides the main bake flame that heats the oven cavity for baking and roasting.
• Works with the range's ignition system to light the burner; a failed burner can prevent the oven from lighting.
• Common symptoms: oven won't reach temperature, burner won't light, weak or uneven flame, or uneven/slow cooking.
• Designed to fit the oven floor area and direct heat across the bake cavity for consistent results.

• Turn off both the gas supply and electrical power to the appliance before servicing.
• Allow the oven to cool completely and use basic hand tools; keep track of mounting hardware.
• Inspect the ignition electrode and burner ports for debris during replacement; do not bend or damage the electrode.
• After installation, check connections and test for proper ignition and a steady flame; if you smell gas or see a faulty flame, shut off gas.

This switch harness is a factory-style wiring connector that restores reliable electrical connections between appliance switches and the main control. It helps resolve intermittent switch operation and loss of function caused by damaged or worn wiring. What it does:

• Replaces a damaged or frayed switch-to-control wiring harness to restore signal and power paths
• Ensures secure plug-and-play connections at switch terminals and control board connectors
• Commonly used when switches work intermittently, fail to respond, or appliance functions are unreliable
• Maintains OEM routing and connector types for correct fit and operation

• Disconnect power at the breaker or unplug the appliance before beginning work.
• Compare the new harness to the original to confirm connector types and wire lengths before installing.
• Secure harness routing away from heat, sharp edges, and moving parts; use existing clips or ties.

This bail is the replacement door/handle support used to secure a handle or attach components to an appliance door or panel. It restores a stable grip and proper attachment when the original bail is cracked, bent, or missing. What it does

• Replaces a worn, broken, or missing bail that supports a door handle or accessory
• Restores a secure connection so the handle or component doesn't wobble or detach
• Helps prevent further damage from a loose or improperly supported handle
• Fits into the existing mounting points to re-establish proper alignment

• One replacement bail

• Disconnect power and remove any removable panels or doors before starting
• Use basic hand tools; retain original screws and fasteners unless damaged
• Align bail with existing mounting holes and secure without over-tightening

This genuine replacement screw secures panels, trim and small components on compatible appliances to restore proper fit and prevent rattling or gaps. Use it when a missing or damaged fastener causes loose or misaligned parts. What it does:

• Fastens panels, bezels, trim pieces and small assemblies to the appliance frame
• Restores secure fit to eliminate rattling, vibration noise or loose trim
• Replaces stripped, rusted or missing screws that prevent proper alignment

• Disconnect power to the appliance before servicing to avoid electrical hazard
• Use the correct screwdriver or driver bit to prevent stripping the head
• Tighten securely but avoid over-torquing; excessive force can strip threads or crack plastics
• Keep removed fasteners organized to ensure correct reassembly

Replacement center orifice holder for gas ranges and cooktops that secures the burner orifice to the valve for correct gas flow, helping restore steady ignition and consistent flame performance. What it does:

• Holds and aligns the center burner orifice with the gas valve to maintain proper fuel delivery.
• Restores correct gas flow when a center burner has a weak, uneven, or no flame.
• Replaces cracked, worn, or missing orifice holders that can disrupt burner operation.

• Turn off the gas supply and electrical power to the appliance before servicing.
• Remove grates and burner parts to access the orifice holder; align the orifice and secure by hand—avoid overtightening.
• After reinstalling, restore gas and power and confirm the burner lights and produces an even flame; if you smell gas, stop.

This tube burner supply is the replacement gas tube that delivers fuel from the range/oven valve to the burner, restoring proper gas flow for reliable ignition and consistent flame performance. What it does:

• Directs gas from the appliance valve to the burner for normal operation
• Replaces cracked, corroded, or clogged burner tubing that can cause fuel flow disruption
• Helps correct symptoms such as burners that won't light, weak or uneven flames, or intermittent ignition
• Restores a sealed path for gas to reduce leakage risk when installed and tightened correctly

• Turn off gas supply and electrical power to the appliance before beginning work
• Verify proper fit and orientation to the valve and burner; use the OEM clamp/hardware if provided
• After installation, check all connections for leaks (soap-and-water test) and restore power per the appliance manual

This is a replacement 8-18 x 5/16 machine screw used to secure appliance panels and components. It restores proper fastener fit so parts stay mounted and operate safely. What it does:

• Fastens panels, brackets, and small components where an 8-18 x 5/16 screw is specified
• Prevents loose parts, rattling, and misalignment caused by missing or worn screws
• Provides the correct thread size and length for reliable reattachment
• Works wherever the OEM calls for this specific 8-18 x 5/16 screw

• Turn off and unplug the appliance before starting any repair
• Use the correct screwdriver or driver bit to avoid stripping the head
• Do not overtighten; snug until secure to prevent damage to threads or mounting surfaces
• If replacing multiple fasteners, use matching screws to maintain proper fit and function

This lower heat shield is a stamped metal shield that protects the oven's lower cabinet area and surrounding components from excessive heat. It helps maintain safe operation and reduces heat transfer to nearby parts. What it does:

• Shields the oven's lower cavity and insulation from direct heat
• Prevents heat-related damage to the range cabinet and nearby components
• Can reduce hotspots that cause smoking or burning odors
• Restores proper airflow and clearance under the oven when damaged or missing

• One lower heat shield

• Disconnect power (and gas, if applicable) before servicing the appliance
• Remove oven drawer and access panels to reach and replace the shield
• Use gloves to protect hands from sharp metal edges during installation
• Tighten fasteners securely but do not overtighten—replace any damaged mounting hardware

This small seal fits around the control valve stem where it passes through the cooktop/range top panel. It helps keep spills and debris out of the valve area, supporting smooth knob operation and consistent burner performance.

• Seals the opening around the valve stem at the top panel
• Helps protect the valve/manifold from moisture, grease, and debris
• Common signs: cracked or missing seal, spills seeping beneath the knob, intermittent ignition after a spill

• Disconnect power and shut off gas; allow the appliance to cool completely
• Pull the knob straight off; remove any trim/bezel as needed
• Lift out the old seal and seat the new seal in the same orientation around the valve stem
• Some models require lifting the cooktop for access; avoid disturbing gas connections.

This small V2 inlet jet directs water flow to the dispenser/ice-making area so the appliance fills and forms properly. It restores correct water routing for consistent filling and helps reduce weak or misshapen ice or slow dispensing. What it does:

• Channels water to the ice maker/dispenser so the correct amount reaches the fill area.
• Helps ensure uniform ice formation and consistent dispenser flow.
• Can resolve symptoms like weak/slow dispensing, underfilled ice trays, or uneven ice cubes.
• Works as the small replacement nozzle where the original inlet jet is worn or blocked.

• One small V2 inlet jet

• Disconnect power and shut off the water supply before beginning work.
• Access may require removing inner panels or the ice maker/dispenser housing; follow your model's service instructions.
• Inspect the seat and surrounding fittings for debris or damage before installing; replace other damaged components as needed.