Jgss66eeles Parts

This RF orifice holder secures the right-front burner orifice in place to help maintain correct gas flow and steady ignition. It replaces a damaged or worn holder to restore reliable burner operation and flame stability. What it does:

• Secures the burner orifice so gas flows through the correct port
• Helps maintain a consistent flame for the right-front (RF) cooktop burner
• Can correct symptoms like weak, uneven, or difficult-to-light flames when the holder is damaged or loose
• Works with the burner assembly to keep the orifice aligned and sealed

• One RF orifice holder

• Turn off gas supply and electrical power before servicing the cooktop
• Remove burner cap and grate to access the orifice holder; reassemble parts in reverse order
• Do not bend or force the orifice; install straight and hand-tighten as needed

This Electrodes & High-Voltage Harness connects the cooktop oven's spark ignition system to the spark module so burners light reliably. Replaces worn or damaged electrodes and harness to restore consistent spark delivery. What it does:

• Transfers high-voltage pulses from the spark module to burner electrodes so ignition can occur
• Helps ignite gas burners by delivering a focused spark at the burner ports
• Commonly used when one or more burners won't spark or ignition is intermittent
• Restores proper spark routing when wires are cracked, corroded, or electrode tips are damaged

• One set of electrodes and attached high-voltage harness

• Disconnect power and shut off gas supply before servicing to avoid shock or fire hazard
• Handle electrode tips and insulation carefully; avoid bending or contaminating the electrode surfaces
• Inspect mounting points and connectors for damage; replace if loose or corroded

This replacement line cord restores the appliance's connection to household power so it can run safely and reliably. It replaces a damaged or worn cord to help eliminate power loss and intermittent operation. What it does:

• Supplies mains power from the wall outlet to the appliance
• Replaces frayed, cut or damaged wiring that can cause power failures
• Helps resolve symptoms like no power, intermittent power, or visible cord damage
• Works with the appliance's existing terminal block and strain-relief connection

• Disconnect the appliance from power at the breaker or outlet before starting work
• Route the cord and secure the strain relief exactly as the original to prevent wear
• Tighten terminal connections securely; replace damaged terminal hardware if present

This tube burner box is a replacement gas tube assembly that routes gas from the manifold to the range burner ports. Restores proper gas flow to the burner area for reliable ignition and stable flames. What it does:

• Channels gas from the manifold to the burner tube so the burner can light and operate
• Replaces damaged, bent or corroded supply tubing that can cause poor or uneven flames
• Supports proper positioning of the burner tube for consistent ignition
• Helps eliminate common symptoms like burners that won't light or burn unevenly

• Turn off the gas supply and unplug the appliance before starting work
• Use basic hand tools; follow factory torque and alignment when reconnecting gas fittings
• After installation, check all gas connections for leaks with a soap solution or approved leak detector

This spacer base positions and supports components inside the appliance to maintain correct alignment and clearance, helping reduce vibration and wear. It's a simple replacement part when the original is cracked, broken, or missing. What it does:

• Provides a stable mounting surface and correct spacing for internal panels or components
• Restores proper alignment to reduce vibration, noise, and uneven operation
• Commonly replaced when the original spacer is cracked, deformed, or missing
• Helps maintain secure fastener engagement and proper component clearance

• Spacer base (single piece)

• Disconnect power to the appliance before starting any repair
• Follow manufacturer service instructions or parts diagram for correct location and orientation
• Basic hand tools typically required; inspect surrounding fasteners and mounting surfaces during installation

This 90° elbow assembly connects a refrigerator's water line to the fill/ice system, routing water where the appliance needs it and helping maintain a secure, leak-resistant connection. Designed to replace a damaged or worn elbow to restore proper water flow. What it does

• Redirects water flow at a 90° angle for tight installations and proper tubing routing
• Provides a sealed connection between water tubing and the appliance inlet to prevent leaks
• Commonly used where a bent, cracked, or blocked elbow causes reduced or no water to the ice maker or dispenser
• Helps stop intermittent leaking caused by a split or damaged elbow fitting

• One 90° elbow assembly

• Shut off water supply and unplug the appliance before beginning work
• Inspect tubing and seals; replace any worn tubing or O-rings to ensure a proper seal
• Hand-start fittings to avoid cross-threading, then snug per manufacturer guidance

Left hand side

This panel backer is the interior support piece that helps secure and align the appliance control panel, protecting wiring and switches while keeping the panel stable during use. It restores proper fit and prevents rattling or loose controls. What it does:

• Supports and positions the control/display panel so buttons and switches align correctly
• Protects internal wiring and components behind the control panel
• Reduces panel flexing, vibration noise, and intermittent button contact
• Helps maintain a flush, stable control surface for reliable operation

• Disconnect power before starting — follow appliance-specific safety steps
• Remove the outer control/display panel to access and replace the backer
• Transfer any buttons, clips, or switches from the old backer to the new part as needed
• Inspect adjacent wiring and mounting clips; replace any damaged fasteners for a secure fit

The GE Range Support Base is an OEM replacement part for GE wall ovens and ranges. It provides critical support and stability for the appliance, ensuring safe and reliable operation. 

Causes of a bad support base could include cracks or breaks in the material over time due to repeated stresses and strains from the heavy appliance above it. The base may also become damaged or unstable if the unit is moved incorrectly and suffers impact.

Symptoms of a failing support base include:

• The oven or range rocking or becoming unlevel during use  
• Noisy or squeaking sounds coming from the base
• Visible cracks or weaknesses in the material
• The appliance seeming loose or unstable on the countertop or floor

This genuine GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

The Range NG High Altitude Kit is an OEM part for GE gas ranges. This high-altitude conversion kit allows the range to operate properly at elevations above 2000 feet.

Causes related to needing this kit are using the range at a high elevation without proper adjustment for decreased air pressure and oxygen levels.

Symptoms of needing this high-altitude kit include:

• Unstable or inconsistent flame during operation
• Excessive cooking times
• Incomplete combustion of gas resulting in carbon monoxide issues

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.