Jgss66eeles Parts

This LP high-altitude conversion kit adapts select gas cooking appliances for liquid propane use at elevation. It properly meters gas flow so burners light easily and produce clean, stable flames in thin-air conditions.

• Configures the appliance for LP operation in high-altitude installations
• Calibrates fuel delivery to maintain proper flame size and combustion
• Helps address yellow/sooty flames, flame lift, or hard-to-control simmer after conversion
• Promotes reliable ignition and even heat across burners

• Conversion affects gas type and pressure; must be performed per the manufacturer's instructions and local codes
• Shut off gas and power before service; work in a well-ventilated area away from open flames or sparks
• After conversion, leak-test all connections and adjust air shutters per model guidance if applicable
• Intended for LP high-altitude applications only; use the model-specific kit specified by the manufacturer

This orifice holder secures the burner orifice on the right-rear gas burner so the correct gas flow is delivered for stable ignition and flame. It replaces a worn or damaged holder to restore proper burner seating and alignment. What it does:

• Holds the burner orifice in place for the right-rear gas burner
• Ensures consistent gas flow to the burner for steady flame and reliable ignition
• Helps correct symptoms like weak or uneven flame, burner that won't light consistently, or a misaligned burner cap
• Works with the burner assembly to maintain correct orifice positioning

• One right-rear burner orifice holder

• Turn off gas supply and unplug the appliance before starting any service
• Remove burner cap and grate, then unfasten the orifice holder retaining screw(s) to replace the part
• Verify correct orifice and position match before reassembly; do not force parts

This burner control knob lets you set the surface burner level on your range or cooktop. Replace a cracked, worn, or missing knob to restore reliable control and a clean, matched stainless-steel look.

• Attaches to the burner valve/switch shaft to select settings from Off to High
• Replaces knobs that are cracked, stripped, loose, or missing
• Helps the control turn smoothly and stay aligned with the indicator
• Restores a consistent appearance across all burner controls

• Ensure all controls are Off and surfaces are cool; disconnect power and shut off gas before servicing
• Pull the old knob straight off the stem; if tight, pull evenly—do not pry against the panel
• Align the new knob hub with the stem and press straight on until fully seated

This orifice holder secures the LF gas orifice on compatible gas cooktop or range burners, keeping the orifice aligned for proper gas flow and reliable ignition. It helps restore consistent burner flames and safe operation. What it does:

• Holds the LF burner orifice in the correct position for steady gas flow
• Ensures proper alignment so burners light and maintain a stable flame
• Common symptom fixes: burners that won't light, weak or uneven flames, or inconsistent heating
• Works with standard burner components to maintain safe combustion performance

• One orifice holder

• Shut off the appliance's gas supply and power before attempting service
• Replace only with the exact orifice holder designed for your appliance model
• After installation, check for gas leaks with a soap solution or a leak detector and follow local codes

This upper panel manifold directs and supports the gas/controls assembly behind the cooktop, restoring proper alignment and airflow for safe burner and control operation. Use when the front manifold area is cracked, warped, or loose. What it does:

• Provides the structural mounting and pathway for burner valves and control components on the upper manifold assembly
• Restores proper spacing and alignment so burners ignite and controls actuate consistently
• Helps prevent gas routing or support issues caused by a damaged or bent manifold panel
• Reduces vibration and rattling associated with a loose or broken upper panel

• One upper panel manifold as shown

• Designed to replace the damaged upper manifold panel; inspect adjacent gaskets, brackets, and hardware for wear
• Installation requires basic hand tools; follow appliance-specific service manual for disassembly/reassembly steps
• Disconnect power and shut off gas supply before starting work; test for proper operation and leaks after installation

This is a 10-16 x 2-3/4 machine screw used to secure appliance panels and components. It replaces worn or missing fasteners to restore proper fit and reduce rattling and loose parts. What it does:

• Secures panels, brackets, or assemblies where a 10-16 thread and 2-3/4" length are required
• Restores stable mounting to stop vibration, rattling, or misaligned panels
• Matches OEM thread and length for correct fit in designated fastening points
• Used in repairs where original screws are stripped, corroded, or missing

• One 10-16 x 2-3/4 machine screw

• Use the correct screwdriver or socket to avoid stripping the head
• Tighten securely but avoid over-torquing to prevent thread damage
• Replace only in the specified location and confirm proper alignment before final tightening
• Disconnect power and follow appliance safety guidance when accessing internal components

This oven back insulation panel replaces the thermal lining at the rear of the oven cavity to help retain heat and protect surrounding components for more consistent baking and roasting performance. What it does:

• Replaces worn or damaged rear oven insulation that can allow excess heat loss
• Helps maintain stable oven temperatures for more even cooking
• Protects rear electronics, wiring, and cabinet materials from excess heat
• Can reduce heat transfer to surrounding cabinetry and lower exterior surface temperatures
• Address scorch or burning smells coming from the oven cavity due to deteriorated insulation

• Disconnect power to the appliance before starting any repair; allow the oven to cool completely.
• Handle the insulation gently to avoid tearing; use gloves and eye protection as needed.
• Typically installed from the back of the oven cavity and secured with factory clips or screws.

This front door insulation pad fits behind the oven door to help reduce heat loss and lower the exterior door temperature for safer, more consistent cooking. It replaces worn or damaged insulation to help the oven maintain oven cavity heat. What it does:

• Provides thermal barrier behind the oven door to reduce heat transfer
• Helps the oven hold temperature more consistently during use
• Reduces exterior door heat, improving user safety
• Replaces torn, compacted, or missing insulation that can cause heat loss

• Disconnect power to the appliance before starting any repair.
• Allow the oven and door to fully cool; handle insulation with gloves if soiled.
• Some installs require removing the oven door or inner door panel—keep screws and fasteners organized.
• If you encounter damaged clips or fasteners, replace them with OEM parts for a secure fit.