Jmw2430 Parts

This door plastic bracket secures the appliance door to the cabinet, keeping the door aligned and stable so it closes properly and seals. A simple replacement for worn, cracked, or broken door support hardware. What it does

• Holds the door in the correct position and connects the door assembly to the cabinet.
• Restores proper door alignment to reduce gaps, scraping, or uneven closing.
• Stops rattling or rocking caused by a cracked or broken bracket.
• Helps the door latch and seal correctly so the appliance can operate safely.

• One door plastic bracket (LW) as shown.

• Disconnect power (and water if applicable) before starting any repair.
• Access may require removing the door or inner door panel; keep track of fasteners.
• Inspect surrounding screws, clips, and the mating surface; replace any damaged fasteners.

*INCLUDES STAINLESS OVERLAY*

The Control Panel is an OEM replacement part for Whirlpool ovens. It is responsible for controlling and regulating various functions of the range, such as temperature settings, timers, and cooking modes.

A bad control panel can occur due to electrical malfunctions, component failure, or damage. If you notice symptoms such as unresponsive buttons, error codes on the display, or the range not functioning properly, it may be time to replace the control panel.

Symptoms of a bad control panel include:

• Unresponsive buttons or controls
• Error codes displayed on the control panel
• Malfunctioning or inconsistent temperature settings

Restore your range by replacing the faulty or damaged control panel with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

The outer door glass is an OEM replacement part for Whirlpool ranges. This glass panel serves as a protective layer for the inner components of the oven door. It helps insulate the oven cavity, keeping the heat inside during cooking while preventing the external surface of the door from becoming too hot to touch.

Causes of a bad oven door include:

• Accidental impacts or mishandling
• Cracked or shattered glass
• Fogging or condensation between the glass layers

A damaged or worn-out outer panel can occur due to accidental impacts, scratches, or regular wear and tear. If you notice dents, scratches, or discoloration on the door panel, it may be time to replace it.

This OEM Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

A hex locknut used to secure rotating shafts and threaded fasteners on compatible appliances. Small but critical, it keeps components held firmly in place to prevent loosening during normal operation. What it does:

• Secures shafts, pulleys, or control components to prevent axial movement
• Stops parts from working loose due to vibration or regular use
• Can resolve symptoms like noisy operation, wobbling parts, or loose knobs/assemblies
• Provides a reliable threaded connection when paired with the correct mating fastener

• One hex locknut (quantity: 1)

• Disconnect power and, if applicable, unplug appliance before starting any repair
• Use the correct wrench or socket size and tighten until snug—avoid overtightening
• If access requires disassembly, keep track of removed parts.

This replacement door handle restores a secure grip and normal door operation for compatible Whirlpool refrigerators. Made to replace cracked, loose, or broken handles so the door opens and closes smoothly and safely. What it does:

• Provides a sturdy grip for opening and closing the refrigerator door
• Replaces damaged, cracked, or missing handles that make door use difficult
• Helps maintain proper door alignment and user safety during regular use
• Matches factory fit and mounting points on compatible models

• Disconnect power to the appliance or unplug the refrigerator before starting work.
• Remove any trim or end caps carefully to access mounting screws; keep fasteners for reassembly.
• Use basic hand tools; support the door while removing/installing hardware to avoid damage.

This wire cover is a protective sleeve that helps route and shield appliance wiring to reduce wear and prevent accidental contact. It restores a neater harness run and helps maintain safe electrical routing inside the appliance. What it does:

• Protects wires from abrasion and chafing against sharp edges or moving parts
• Helps prevent exposed conductors that can cause shorts, arcing, or burning smells
• Keeps wiring bundled and routed to reduce pinching and stress on connectors
• Reduces risk of intermittent electrical issues caused by damaged insulation

• Disconnect power before beginning any service to avoid shock or injury
• Inspect surrounding wiring and connectors for damage; replace any frayed or exposed wires
• Slide cover over the wiring harness or route harness through sleeve as needed; secure with existing clips or approved fasteners

This genuine replacement mounting bracket secures appliance components to the cabinet frame for stable support and proper alignment. It helps restore fit and reduces movement of panels or mounted parts. What it does:

• Provides a secure attachment point for internal or external appliance components.
• Restores proper alignment and stable fit to help reduce rattling or shifting.
• Supports mounted panels or assemblies so controls and doors operate smoothly.
• Matches OEM fit and function for a straightforward replacement.

• Disconnect power (and water if applicable) before beginning any repair.
• Basic hand tools are typically required; avoid overtightening fasteners.

This metal mounting bracket secures internal components so assemblies stay aligned and stable during normal use. Replacing a damaged or missing bracket restores proper fit and reduces noise, vibration, or part movement. What it does:

• Secures and supports appliance components or assemblies to the cabinet or frame
• Keeps parts aligned to prevent rubbing, misalignment, or binding
• Reduces rattling, vibration, and loose-part noises caused by a worn or broken bracket
• Provides a stable attachment point for screws or fasteners

• One mounting bracket

• Disconnect power (and water if applicable) before starting any repair
• Use basic hand tools (screwdriver, socket set) and keep fasteners from the old part for reuse if undamaged
• Align bracket carefully and tighten screws snugly—do not overtighten to avoid stripping or distortion
• Wear gloves to protect against sharp edges and follow all safety instructions in your appliance manual

This trim vent is the exterior plastic trim piece that surrounds the dryer's front vent opening, restoring a finished appearance and protecting the vent area from damage. It's a direct-replacement exterior trim for dryers with a front vent opening. What it does

• Covers and protects the front vent opening while keeping the dryer's appearance finished
• Helps direct airflow from the dryer's vent outlet toward the exhaust connection
• Replaces cracked, warped, or broken vent trim that allows debris or drafts
• Reduces gaps that can allow lint buildup around the dryer's vent opening

• One trim vent

• Install with the dryer disconnected from power; follow the dryer's service manual for access steps
• Usually secures with snap clips or a few screws—keep original fasteners if reusing
• Check alignment with the dryer's vent opening before tightening fasteners
• If you encounter additional damage to surrounding panels or mounting points, inspect those areas for repair