Jp356bom1bb Parts

This flat washer (.250 inch inner diameter x .812 inch outer diameter) is a simple replacement part that helps distribute load from a fastener and protects mating surfaces for reliable appliance operation. What it does:

• Provides a stable bearing surface for screws, bolts or studs to reduce wear on parts
• Helps distribute clamping force to prevent pull-through or deformation of softer materials
• Reduces vibration and movement at the joint when installed correctly
• Missing or damaged washers can lead to loose fasteners, increased vibration or component misalignment

• Disconnect power and water before servicing the appliance
• Replace like-for-like: inner/outer diameters and thickness match the original washer
• Inspect mating hardware and surfaces for damage; replace corroded or deformed fasteners as needed
• Tighten fasteners evenly and avoid over-torquing to prevent washer or component damage

1200 watts

This replacement screw secures appliance components and helps keep panels, brackets, and controls firmly attached for reliable operation. It's a simple, direct fix when a mounting screw is missing, loose, or stripped. What it does:

• Fastens panels, trim, brackets or electrical components to reduce movement and rattling.
• Restores proper alignment of parts that shift when a screw is missing or worn.
• Helps maintain electrical and mechanical connections by keeping components seated.
• Common symptom: loose or vibrating panels, trim gaps, or visibly missing hardware.

• Disconnect power to the appliance before accessing internal components.
• Use the correct screwdriver or driver bit to avoid stripping the head.
• Thread gently and avoid overtightening to prevent stripping the mating threads or cracking surrounding parts.
• Keep any removed hardware organized to ensure placement of all required fasteners during reassembly.

This is a replacement black screw used to secure interior or exterior appliance components. It provides a discrete, color-matched fastener to restore proper fit and stop rattles or loose panels. What it does

• Fastens trim, panels, brackets or control components where a small black screw is required
• Restores secure mounting to eliminate vibration, rattling or misaligned parts
• Matches finished appliance surfaces for a clean, unobtrusive look
• Simple hardware replacement for small fastener loss or damage

• One black screw

• Disconnect power to the appliance before servicing to avoid shock or injury
• Use the correct screwdriver to seat the screw; avoid overtightening to prevent stripping or cracking surrounding material
• Keep track of small fasteners during disassembly and handle with care
• Replace with the exact part number if the original screw is damaged or the thread/length differs

This infinite control knob assembly replaces a worn, broken, or missing control knob on electric ranges and cooktops, restoring safe and accurate user control of the infinite switch. Easy to snap onto the control shaft for quick cosmetic and functional repair. What it does:

• Fits over the infinite control shaft to allow user adjustment of temperature/power settings
• Replaces cracked, stripped, or missing knobs that slip or won't turn
• Restores tactile control and clear pointer alignment for consistent setting selection
• Helps prevent accidental shaft damage from using improvised controls

• One knob assembly

• Disconnect power to the appliance before servicing. For gas units, also turn off the gas supply if applicable.
• Remove the old knob by pulling straight off the control shaft; push the new knob straight on until it seats.
• Ensure the knob pointer aligns with the control detents; do not force or overtighten.
• If the knob does not fit securely, verify the part number and shaft type before proceeding.

This support spring secures a stove/oven radiant heating element in place to keep the element aligned and stable during use, helping maintain reliable heating and prevent sagging or poor contact. What it does:

• Holds the radiant heating element firmly to the oven/range chassis for consistent heat distribution
• Prevents the element from shifting, sagging, or losing electrical contact
• Helps reduce arcing or intermittent heating caused by a loose element
• Common symptom: oven or burner element not staying seated, heating inconsistently, or visibly loose

• Disconnect power to the appliance before starting any repair to avoid shock.
• Remove oven racks and the heating element as needed for access; handle the element carefully to avoid damage.
• Replace only with the exact part; ensure the spring is seated correctly to secure the element.

A small machine screw used to fasten appliance panels and components. This 10-32 x 7/16 screw secures assemblies and replacement parts so panels and brackets stay properly mounted during normal operation. What it does:

• Fastens small panels, brackets, and assemblies that use a 10-32 thread
• Replaces missing or stripped mounting screws to stop rattling and loose parts
• Helps maintain proper alignment of fitted components
• Used where a short 7/16" length is required for a flush fit

• Unplug the appliance before starting any repair
• Use the correct sized screwdriver or nut driver for 10-32 threads
• Hand-start the screw to avoid cross-threading, then snug—do not overtighten
• If threads are damaged, replace with correct fastener; avoid forcing the screw

This glass maintop assembly provides the smooth cooking surface and trim for a slide-in or drop-in electric cooktop, restoring the finished top and helping contain spills for easier cleanup and safe cookware support. What it does:

• Replaces a cracked, chipped or scratched cooktop surface to restore a flat, stable cooking area
• Provides the finished glass surface that supports burners and cookware
• Helps contain spills and prevents debris from falling into the cabinet below
• Restores the top trim and mounting interface used to secure the cooktop

• Disconnect power to the range at the breaker before starting; ensure the glass is completely cool
• Handle the glass with care to avoid breakage and injury; use gloves and eye protection
• Basic removal of burners, trim screws and mounting fasteners is typically required; follow the manufacturer's service instructions