Jt-12 Parts

This flexible 6-foot conduit routes and protects power wiring for compatible appliances, providing a neat, durable path for electrical leads and helping prevent kinks or abrasion during installation and service. What it does:

• Shields and organizes the appliance power cord or wiring harness to reduce wear and chafing
• Provides a protected, flexible pathway when extra cable length is needed
• Helps maintain a clean installation and prevents sharp bends near terminals
• Commonly used as an optional accessory when relocating or extending factory wiring

• One 6 ft flexible conduit

• Suitable for use where manufacturer allows optional conduits; follow appliance wiring and grounding instructions
• Disconnect power before installing or routing wiring to avoid shock or damage
• Use appropriate connectors/clamps at both ends to secure conduit and prevent strain on wires

This is the lower oven insulation trim that helps seal and insulate the oven cavity, improving temperature stability and reducing heat loss. It restores the proper fit of the oven's bottom insulation assembly for safer, more efficient operation. What it does:

• Seals the gap between the oven floor and cabinet to help retain heat during baking and broiling
• Helps reduce heat transfer to surrounding cabinetry, lowering the chance of exterior heat-related issues
• Prevents drafts and debris from collecting under the oven cavity
• Addresses common symptoms like uneven cooking, excessive exterior heat, or visible gaps at the oven bottom

• One lower oven insulation bottom trim piece

• Installation requires access to the oven cavity; disconnect power and allow the oven to cool before starting
• Handle insulation pieces with care; wear gloves and a dust mask if insulation fibers are exposed
• Reinstall any removed screws or clips per OEM diagrams and ensure a snug fit to ensure proper sealing

This broil element is the oven's upper heating element that delivers intense top heat for broiling and finishing dishes. Replacing a failed element restores reliable broil performance and consistent, even top browning.

• Provides direct top heat during Broil to sear and brown foods evenly
• Common signs of failure: broiler won't heat or the element doesn't glow
• Uneven top browning or longer-than-normal broil times
• Visible blisters, cracks, or breaks; in some cases, selecting Broil may trip the breaker

• Disconnect power at the breaker and allow the oven to cool completely
• Remove mounting screws from inside the oven and gently pull the element forward
• Transfer the two wires to the new element one at a time; do not let wires retract into the cavity
• Reinstall screws, ensure the element is centered and clear of the liner, restore power, and test

This heat-resistant gasket fits around the broil element where it passes through the oven liner. It helps seal the opening to reduce heat and moisture leaks and provides a secure, finished fit for the element.

• Seals the broil element pass-through at the oven liner to help contain heat, steam, and splatters
• Helps protect insulation and wiring behind the liner from spills and debris
• Cushions the mounting point to reduce metal-to-metal wear and rattles
• Common signs it's needed: brittle, cracked, or missing gasket; discoloration or residue at the pass-through; element feels loose at the mounting point

• Disconnect power at the breaker and let the oven cool completely before servicing
• Remove broil element screws and gently lower or pull the element forward to access the pass-through
• Remove the old gasket; seat the new gasket evenly without stretching or pinching; don't overtighten hardware
• Reconnect firmly and route wires away from sharp edges before reassembly

The Door Hinge (Left) is an OEM part for GE ranges. It acts as the pivot point that allows the left side of the range door to open and close.

Causes of a bad hinge include normal wear and tear from repeated use, accidental impacts that deform the hinge, or failure of brackets or bushings.

Symptoms of a bad left door hinge include:

• Difficulty or resistance when opening and closing the left side of the door
• Noise or squeaking coming from the hinge area  
• Visual signs of damage or bending to the hinge itself
• The left side of the door not staying firmly shut or becoming misaligned

This OEM GE replacement hinge is also compatible with Hotpoint, RCA, and select Kenmore models.

This outer door assembly restores the exterior of the oven with a finished black outer panel and frame, returning the unit's look and protection. Fits as the complete outer door piece to replace damaged or worn exterior doors. What it does:

• Replaces a cracked, dented or cosmetically damaged oven outer door panel
• Restores the door's exterior finish and helps protect internal door components
• Works with existing inner glass and hardware when undamaged
• Helps eliminate light drafts or visible gaps caused by a bent or warped outer panel

• Disconnect power to the appliance before starting any repair
• Outer door assemblies can be heavy or awkward—use two people when removing/reinstalling
• Handle glass areas carefully; do not overtighten fasteners to avoid cracking inner glass
• Follow OEM service manual instructions for safe removal/installation and to verify any needed additional parts

A replacement liner support that secures the refrigerator cabinet liner and keeps interior trim and panels aligned for a proper seal and appearance. Restores stability to cracked or broken support points. What it does:

• Holds the cabinet liner and interior trim in position to prevent gaps and movement
• Helps maintain door seal alignment by keeping liner edges stable
• Reduces rattling or shifting caused by a damaged support
• Commonly replaced when liner pieces are cracked, broken, or loose

• One liner support

• Disconnect power to the appliance before beginning any repair
• Remove food, shelves, and trim pieces as needed to access the damaged support
• This part typically secures with clips or fasteners; inspect existing hardware and replace if necessary

Size: 8-32 x 1/2 inch.

This hidden-bake insulation panel fits under the oven floor to help control heat transfer and protect surrounding cabinetry. It restores proper oven cavity insulation for safer operation and more consistent cooking results. What it does:

• Replaces the insulation under the oven floor used with hidden-bake elements
• Reduces heat transfer to the oven cabinet and adjacent cabinetry
• Helps maintain more even oven temperatures for baking and roasting
• Reduces risk of external surface overheating and related odors

• One hidden-bake oven insulation panel

• Disconnect power to the oven before starting any work to avoid shock or injury
• Access typically requires removing the oven bottom or storage drawer—follow your model's service instructions
• Handle insulation carefully to avoid tearing; wear gloves and a dust mask if insulation is dusty