Jvm3160dfww Parts

This nut assembly is a small mounting fastener that secures appliance components to studs or brackets, helping keep panels and internal parts stable for safe, quiet operation. What it does

• Secures components to threaded studs or bolts to prevent movement and vibration
• Restores proper fit of panels, trim, or internal assemblies when a worn or missing nut causes looseness
• Prevents electrical or mechanical contact caused by shifting parts
• Simple, durable replacement for a single mounting point

• Disconnect power to the appliance before servicing to avoid shock or injury
• Use the correct size wrench or socket to avoid rounding the nut; snug, not overly tight
• Verify the mating stud/bolt and threads are clean and undamaged before installation
• If other mounting hardware is corroded or damaged, replace all affected fasteners for a secure fit

This body latch assembly secures the appliance door during operation, restoring proper door closure and allowing cycles to start and run safely. It replaces a worn or broken latch to improve sealing and reliable door engagement. What it does:

• Physically latches the door to keep it closed during operation
• Prevents the appliance from starting when the door is not fully engaged
• Resolves symptoms like a door that won't stay closed, cycles that won't start, or intermittent door-sense errors
• Replaces worn, cracked, or damaged latch components that impair engagement

• Disconnect power (and gas, if applicable) before beginning any repair
• Remove outer door or access panel per OEM instructions to reach and replace the latch
• Handle plastic latch components carefully to avoid cracking; test door engagement before reassembling panels

The Thermostat is an OEM part for GE  microwaves. It monitors the temperature inside the microwave during operation.

Causes of a bad thermostat can be simply wear and tear over time. Exposure to spills, dirt, or dust can also cause issues.

Symptoms of a bad microwave thermostat include:

• Food not heating evenly or completely
• Longer than normal cook times needed
• Error messages related to abnormal temperatures
• Potential overheating issues or damage due to lack of temperature control

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models.

A noise filter that helps suppress electrical interference on the appliance power line, reducing hum, arcing and radio-frequency interference for more reliable operation. Fits into the appliance mains to limit unwanted electrical noise. What it does

• Suppresses line noise and radio-frequency interference that can cause humming, buzzing or intermittent operation.
• Helps prevent electrical interference that affect controls, displays or nearby audio equipment.
• Used where power-line filtering is required to maintain stable operation of the appliance's electronics.
• Common symptom: intermittent control response, audible electrical noise, or interference-related malfunctions.

• One noise filter.

• Disconnect power at the breaker or unplug the appliance before servicing.
• Access may require removing a rear or control panel; keep track of fasteners and grounding connections.
• Replace only with the exact part number; ensure proper orientation and secure mounting.

This control panel assembly provides the front user interface for your appliance, restoring button access and a clean appearance. It replaces a cracked, damaged, or unresponsive control panel so you can operate your appliance normally. What it does:

• Replaces the appliance's front control surface and button cluster
• Restores tactile button operation and visible status indicators
• Common fix for unresponsive buttons, worn labels, or cosmetic damage
• Helps ensure control signals reach the internal electronics when the panel itself is faulty

• Disconnect power to the appliance before starting any work to avoid shock hazard
• Handle the assembly carefully to avoid damaging buttons, connectors, or the display lens
• May require removal of the console or trim panels and disconnection of wiring harnesses

This nut assembly secures an appliance component to its mounting point, restoring a solid connection and preventing unwanted movement. Replace a damaged or missing nut to stop rattling and keep parts aligned for reliable operation. What it does:

• Fastens a panel, bracket or component to its mounting stud or bolt to maintain proper alignment.
• Restores a secure connection when the original nut is stripped, corroded or missing.
• Helps stop rattling, looseness or parts that won't stay in place.
• Works as a direct replacement to restore proper fit and function.

• Disconnect power (and water if applicable) before beginning any repair.
• Use the correct-size socket or wrench; avoid cross-threading when installing.
• Tighten snugly but do not overtighten — replace mating hardware if threads are damaged.

This lamp holder secures the oven light bulb and provides the electrical connection needed for interior oven illumination. It restores a stable socket for the bulb so the oven light turns on reliably and stays mounted. What it does:

• Holds and connects the oven light bulb so the interior light illuminates during use
• Replaces a cracked, melted, or loose socket that can prevent the bulb from lighting
• Stops intermittent lighting caused by a worn or failed lamp holder
• Prevents the bulb from rattling or falling out when the oven door is opened or closed

• One lamp holder

• Disconnect power to the appliance before starting work to avoid shock
• Allow the bulb and interior to cool before handling the lamp holder
• Handle wiring and connectors carefully; match original connections and secure firmly

The Microwave Transformer is an OEM component specifically designed for GE built-in microwave ovens. This transformer steps down household voltage to safely power microwave generation and magnetron tube operation. 

Causes of failure can be heat cycling degrading insulation or loose electrical connections resulting in arcing. Moisture damage over time can corrode internal windings and circuitry.

Symptoms include: 

• Inability to produce microwaves for consistent cooking 
• Sparking or burning smells coming from transformer casing
• Tripped circuit breakers or blown fuses after usage  
• Intermittent or unreliable power to oven electronics

This genuine GE part is compatible with Hotpoint and select Kenmore microwaves as well.

This electronic main control board manages and times the appliance's functions, restoring proper cycle control and user-interface operation when the original board fails. Replace a faulty board to return consistent, reliable appliance control. What it does:

• Receives user inputs and runs the appliance's control programs and cycles
• Sends power and signals to motors, valves, heaters, and display components
• Prevents or isolates erratic operation caused by failed logic or damaged circuitry
• Commonly used when appliance has no display, won't start, or shows error codes tied to control faults

• One main control board as pictured

• Always disconnect power before servicing to avoid shock or damage
• Handle circuit board by edges and avoid static discharge; use an anti-static wrist strap if available
• Verify connectors and harness locations before removal; note or photograph wiring for reassembly

This capacitor helps the appliance motor start and run smoothly, restoring proper motor operation and reducing startup strain. Use this exact replacement to address motor performance issues. What it does:

• Provides the electrical phase shift needed for the motor to start and run
• Restores normal motor startup and running behavior
• Can resolve humming, slow or non-starting motors, and intermittent motor stalls
• Works with the motor's control circuitry to stabilize performance under load

• Always disconnect power to the appliance before starting work
• Discharge the capacitor before handling to avoid electrical shock
• Match terminals and wiring exactly to the original; secure connections firmly

This ST4-20 TBHC screw secures panels and components in appliances where a small, thread-forming fastener is required. It replaces stripped or missing screws to restore safe, stable assembly and alignment. What it does:

• Fastens small appliance panels, brackets, or trim where ST4-20 thread-forming screws are specified
• Provides secure holding to prevent rattling, loose parts, or misaligned components
• Used where a short, self-tapping/thread-forming screw is required for sheet-metal or plastic mating surfaces

• Use the correct screwdriver bit to avoid cam-out or head damage
• Start threading by hand to ensure proper alignment before final tightening
• Do not over-torque; overtightening can strip threads or crack plastic parts
• Wear eye protection and follow appliance disconnect and safety procedures before servicing

The Control Board is an OEM part for GE microwaves. This board is responsible for controlling the various heating elements, fans and sensors within the microwave to make sure you have proper and safe operation. It allows the microwave to function, including setting time/power levels and relaying information from the temperature and humidity sensors.

Causes of a bad control board can include failure due to prolonged exposure to steam and moisture inside the microwave, defects from manufacture, or damage due to impact or mishandling.

Symptoms of a bad control board include:

• Microwave not heating or working properly
• Unable to set correct time/power level
• Error codes or strange beeping during use
• Fans or other internal components not functioning

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

The Black Door is an OEM part for GE microwaves. As the main barrier between the microwave cavity and exterior, the door is subject to constant exposure and wear. 

Causes for a bad door can include dents, scratches or other surface damage accumulated over time and use. The door seal may deteriorate, failing to provide an adequate barrier between the radiation and the exterior. Hinges or latches may become loose or fail to function properly.

Symptoms of a bad door include:

• Inability to securely close or latch the door 
• Leaks of light or steam from the door seams
• Faulty seals that no longer prevent radiation escape
• Loose or improperly functioning hinges
• Physical damage impairing aesthetic appearance

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

The Turntable Motor is an OEM part for GE microwaves. It is responsible for rotating the glass turntable plate during cooking, ensuring food is evenly heated throughout the microwave cavity. 

Symptoms of a bad turntable motor include:

• The turntable not spinning at all or rotating unevenly
• Loud grinding or clicking noises coming from the motor area  
• The turntable plate wobbles excessively during the operation

Causes can be normal wear and tear over time from continuous use, failure of electronic components in the motor, or damage from heavy loads or impact. This GE replacement motor restores even cooking performance.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. Replace yours today before a minor problem becomes a major repair bill. Continued use without a properly functioning turntable can damage other microwave components.
 

The Turntable Shaft is an OEM part for GE built-in and over-the-range microwaves. It acts as the central hub on which the turntable platter smoothly rotates during the cooking cycle. 

Causes of a problematic shaft can include wear from prolonged use creating play or friction in rotational movement. Debris intrusion into the central bearing assembly can also affect smooth operation over time.

Symptoms of a bad shaft include: 

• Turntable that no longer spins consistently or doesn't turn at all
• Grating or grinding noises coming from below the turntable 
• Imbalanced cooking results affecting some areas more than others

This GE replacement shaft ensures even heating by allowing for uniform distribution of microwave energy throughout cooking. Compatible with GE Profile, Hotpoint, and select Kenmore units, it restores reliable functionality before further troubles develop.