Jvm3160vf3ww Parts

This outer case is the main exterior cabinet that protects internal components and provides the appliance's finished appearance. It restores structural support and a clean exterior when the original cabinet is damaged or removed. What it does:

• Replaces a dented, cracked, corroded, or missing outer cabinet to restore protection and appearance
• Shields internal parts from dust, moisture, and physical contact
• Provides mounting surfaces and alignment for internal panels and controls
• Helps maintain correct airflow paths and component spacing inside the appliance
• Visible cosmetic part that affects the unit's finished look

• Disconnect power and water (if applicable) before starting
• Handle carefully to avoid sharp edges and to prevent cosmetic scratches during installation
• May require removal of trim, panels, and fasteners; retain original screws and clips unless replacements are provided

The Microwave Case is an OEM exterior shell compatible with GE built-in microwaves. It fully encloses the unit, protecting internal components from damage.

Causes of a bad case can include dents, cracks or peeling of the protective surface over time. Exposure to heat or moisture may degrade certain materials. 

Symptoms of a bad case include:

• Physical deformities that compromise the outer appearance
• Gaps or holes that allow access to internal electronics
• Loose or detached door and control panel trim 

This case is also compatible with select Hotpoint and RCA microwaves.

This rivet assembly is a direct-replacement fastening piece used to secure appliance panels and components, restoring a stable, rattle-free fit and preventing movement caused by worn or broken rivets. What it does:

• Secures panels, brackets, or component mounts to restore proper alignment and support
• Stops rattling, vibration, or loose hardware caused by damaged or missing rivets
• Provides a durable mechanical fastener where original rivets have sheared or loosened
• Helps maintain safe operation by keeping parts properly retained

• Disconnect power (and gas/water if applicable) before attempting any repairs
• Removal may require drilling out the old rivet; installation typically needs a rivet gun or equivalent tool
• Keep hardware orientation the same as the original; replace any damaged surrounding parts

This white refrigerator door assembly replaces a damaged or worn exterior door to restore proper closure and appliance appearance. It provides a factory-style fit and finish for models that use this specific door assembly. What it does:

• Replaces a cracked, dented, or cosmetically damaged refrigerator door to improve appearance
• Restores proper door closure and helps maintain internal temperature by allowing the seal to seat correctly
• Replaces a missing or bent door shell that interferes with normal operation
• Matches factory finish and mounting points for a direct-fit replacement when the OEM door is required

• Disconnect power to the appliance and remove food from the door before starting
• Installation may require removal of trim, hinges, and interior shelves; keep fasteners for reuse
• Use appropriate hand tools and follow the manufacturer's service instructions for alignment and sealing
• If electrical components or wiring are present, test operation before returning the appliance to service

This replacement plate restores the original support and fit for the appliance component it secures, helping stop rattles and misalignment. Use this OEM-design plate when the original is bent, cracked, or missing. What it does:

• Provides a stable mounting surface to secure adjacent parts and assemblies
• Prevents movement that can cause noise, misalignment, or uneven operation
• Restores correct spacing and alignment for panels or elements
• Helps maintain safe, consistent appliance performance when damaged

• One plate

• Disconnect power (unplug or switch off breaker) before starting any repair
• Handle edges carefully; replacement metal parts can have sharp edges
• Verify orientation and alignment before tightening fasteners; use only the hardware specified by the manufacturer

The door assembly is an OEM part for GE microwaves. It is responsible for sealing the microwave interior and providing a secure close and protection against radiation generated during cooking. It is designed to withstand the heat and pressures generated inside the microwave, providing a reliable barrier between the cooking space and the external environment.

A bad door assembly can lead to issues such as a loose or ineffective seal, difficulty in opening or closing the door. Causes of a bad assembly can include wear and tear over time, damage to the door components, or improper handling.

Symptoms of a bad door assembly include:

• A loose or misaligned door that doesn't close properly
• Difficulty in opening or closing the door smoothly
• Visible cracks or damage to the door assembly

Replace your worn-out or damaged door assembly with this genuine OEM GE part to ensure the safe and efficient operation of your microwave. 

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This cover choke is a small protective cap used on compatible ranges to cover and protect the choke assembly. It prevents debris and spills from reaching the choke area so burners operate more reliably. What it does:

• Protects the choke assembly from food, grease and spills that can interfere with burner performance
• Helps maintain proper airflow around the choke for consistent ignition and flame control
• Reduces the risk of clogging or contamination that can cause weak or uneven burners
• Simple replacement can resolve symptoms like noisy or erratic burner operation when caused by debris

• One cover choke

• Turn off power and gas supply to the appliance before servicing; follow manufacturer's safety guidance
• Remove grates and burner components as needed to access the choke area; handle small parts carefully
• Inspect adjacent gaskets and burner parts for damage and clean surrounding areas before installing the new cover

A replacement oven lamp cover that protects and diffuses the interior light so you can see food clearly while preventing direct contact with the bulb. Fits behind the oven lamp housing to restore safe, even illumination. What it does:

• Protects the oven light bulb from food splatter, heat, and accidental contact
• Diffuses and softens the lamp output for clearer, less-glare interior visibility
• Replaces cracked, cloudy, or missing lens that can reduce oven illumination
• Helps maintain proper lamp alignment and housing coverage during use

• One lamp cover

• Disconnect power to the appliance before servicing to avoid electrical shock
• Allow the oven and bulb to cool completely before removing the old cover
• Access may require removing oven racks and/or a few screws or clips from the lamp housing
• Handle the cover carefully—glass/plastic lenses can chip or crack; tighten fasteners snugly but do not overtighten

This capacitor helps the appliance motor start and run smoothly, restoring proper motor operation and reducing startup strain. Use this exact replacement to address motor performance issues. What it does:

• Provides the electrical phase shift needed for the motor to start and run
• Restores normal motor startup and running behavior
• Can resolve humming, slow or non-starting motors, and intermittent motor stalls
• Works with the motor's control circuitry to stabilize performance under load

• Always disconnect power to the appliance before starting work
• Discharge the capacitor before handling to avoid electrical shock
• Match terminals and wiring exactly to the original; secure connections firmly

This outer oven door panel restores the exterior appearance and protective surface of your oven's front. It replaces a scratched, dented, or faded outer door and brings back the original slate finish. What it does

• Replaces damaged or cosmetically worn outer door surface to improve appliance appearance
• Provides the external protective panel that covers internal door components
• Helps the door sit correctly with existing inner panels and hardware when installed properly
• Appropriate for restoring a uniform slate finish after impact or wear

• Disconnect power to the oven before beginning any repair to avoid shock or injury
• Door removal typically requires supporting the door, removing hinge screws, and separating inner panels—follow OEM instructions
• Handle the panel carefully by the edges to avoid scratches or bending

This control panel replaces a damaged or worn front panel and restores the oven's user controls and display visibility. It provides the finished slate appearance and white LED illumination for clear button and readout visibility. What it does:

• Houses the oven control buttons and LED display so you can select functions and monitor settings.
• Restores visible white LED indicators and backlighting for easier reading in low light.
• Replaces cracked, scratched, or discolored front panel surfaces that interfere with operation.
• Helps resolve unresponsive or hard-to-read control areas when the original panel is physically damaged.

• One slate control panel with white LED as shown.

• High-level replacement; basic hand tools required and panel mounts with screws and clips.
• Disconnect power at the breaker or unplug the range before starting to avoid shock.
• Handle LEDs and circuit areas carefully; avoid contact with wiring and circuit board surfaces.