Jvm316od4cc Parts

The Microwave Transformer is an OEM component specifically designed for GE built-in microwave ovens. This transformer steps down household voltage to safely power microwave generation and magnetron tube operation. 

Causes of failure can be heat cycling degrading insulation or loose electrical connections resulting in arcing. Moisture damage over time can corrode internal windings and circuitry.

Symptoms include: 

• Inability to produce microwaves for consistent cooking 
• Sparking or burning smells coming from transformer casing
• Tripped circuit breakers or blown fuses after usage  
• Intermittent or unreliable power to oven electronics

This genuine GE part is compatible with Hotpoint and select Kenmore microwaves as well.

Replacement mounting bracket that secures internal panels or components to the appliance frame, restoring alignment and stability. Use this bracket to replace cracked, bent, or missing supports that cause vibration or loose parts. What it does:

• Supports and secures panels, trim, or internal assemblies to keep components properly aligned.
• Reduces rattling, sagging, or movement caused by a broken or missing bracket.
• Restores stable mounting after impact, wear, or stripped mounting points.
• Helps maintain proper fit and operation of adjacent parts by providing a solid attachment point.

• Disconnect power (and water/gas if applicable) before starting any repair.
• Basic hand tools required; remove adjacent panels or trim for access as needed.
• Retain original fasteners when possible; replace damaged clips or screws.

This electronic main control board manages and times the appliance's functions, restoring proper cycle control and user-interface operation when the original board fails. Replace a faulty board to return consistent, reliable appliance control. What it does:

• Receives user inputs and runs the appliance's control programs and cycles
• Sends power and signals to motors, valves, heaters, and display components
• Prevents or isolates erratic operation caused by failed logic or damaged circuitry
• Commonly used when appliance has no display, won't start, or shows error codes tied to control faults

• One main control board as pictured

• Always disconnect power before servicing to avoid shock or damage
• Handle circuit board by edges and avoid static discharge; use an anti-static wrist strap if available
• Verify connectors and harness locations before removal; note or photograph wiring for reassembly

This ST4-20 TBHC screw secures panels and components in appliances where a small, thread-forming fastener is required. It replaces stripped or missing screws to restore safe, stable assembly and alignment. What it does:

• Fastens small appliance panels, brackets, or trim where ST4-20 thread-forming screws are specified
• Provides secure holding to prevent rattling, loose parts, or misaligned components
• Used where a short, self-tapping/thread-forming screw is required for sheet-metal or plastic mating surfaces

• Use the correct screwdriver bit to avoid cam-out or head damage
• Start threading by hand to ensure proper alignment before final tightening
• Do not over-torque; overtightening can strip threads or crack plastic parts
• Wear eye protection and follow appliance disconnect and safety procedures before servicing

The Control Board is an OEM part for GE microwaves. This board is responsible for controlling the various heating elements, fans and sensors within the microwave to make sure you have proper and safe operation. It allows the microwave to function, including setting time/power levels and relaying information from the temperature and humidity sensors.

Causes of a bad control board can include failure due to prolonged exposure to steam and moisture inside the microwave, defects from manufacture, or damage due to impact or mishandling.

Symptoms of a bad control board include:

• Microwave not heating or working properly
• Unable to set correct time/power level
• Error codes or strange beeping during use
• Fans or other internal components not functioning

This GE replacement part is compatible with Hotpoint, RCA, and some Kenmore models.

The Black Door is an OEM part for GE microwaves. As the main barrier between the microwave cavity and exterior, the door is subject to constant exposure and wear. 

Causes for a bad door can include dents, scratches or other surface damage accumulated over time and use. The door seal may deteriorate, failing to provide an adequate barrier between the radiation and the exterior. Hinges or latches may become loose or fail to function properly.

Symptoms of a bad door include:

• Inability to securely close or latch the door 
• Leaks of light or steam from the door seams
• Faulty seals that no longer prevent radiation escape
• Loose or improperly functioning hinges
• Physical damage impairing aesthetic appearance

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models. 

The Turntable Motor is an OEM part for GE microwaves. It is responsible for rotating the glass turntable plate during cooking, ensuring food is evenly heated throughout the microwave cavity. 

Symptoms of a bad turntable motor include:

• The turntable not spinning at all or rotating unevenly
• Loud grinding or clicking noises coming from the motor area  
• The turntable plate wobbles excessively during the operation

Causes can be normal wear and tear over time from continuous use, failure of electronic components in the motor, or damage from heavy loads or impact. This GE replacement motor restores even cooking performance.

This OEM GE part is also compatible with Hotpoint, RCA, and some Kenmore models. Replace yours today before a minor problem becomes a major repair bill. Continued use without a properly functioning turntable can damage other microwave components.
 

The Turntable Shaft is an OEM part for GE built-in and over-the-range microwaves. It acts as the central hub on which the turntable platter smoothly rotates during the cooking cycle. 

Causes of a problematic shaft can include wear from prolonged use creating play or friction in rotational movement. Debris intrusion into the central bearing assembly can also affect smooth operation over time.

Symptoms of a bad shaft include: 

• Turntable that no longer spins consistently or doesn't turn at all
• Grating or grinding noises coming from below the turntable 
• Imbalanced cooking results affecting some areas more than others

This GE replacement shaft ensures even heating by allowing for uniform distribution of microwave energy throughout cooking. Compatible with GE Profile, Hotpoint, and select Kenmore units, it restores reliable functionality before further troubles develop.
 

The Vent Grille is an OEM replacement part for GE microwaves. It covers and protects the vent opening of your microwave, ensuring proper airflow and ventilation during cooking. It prevents dust, debris, and other particles from entering the vent, keeping it clean.

Symptoms of a faulty vent grille include:

• Visible cracks or damage on the grille
• Poor airflow or ventilation during microwave use
• Accumulation of dust or debris around the vent area

A bad vent grille can occur due to regular wear and tear, accidental damage, or improper cleaning. If you notice signs of damage such as cracks, discoloration, or a loose fit, it may be time to replace the worn-out or damaged vent grille with this genuine OEM part.

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.
 

This electronic control board—also called the smart board—is the microwave's main circuit board. It manages the display, keypad input, and power to key components so the unit responds to commands and operates as designed.

• Coordinates timing and power to cooking components via onboard relays
• Interfaces with the touchpad and front display
• Works with door/safety interlocks to prevent unsafe operation
• Failure symptoms include a blank or flickering display, unresponsive buttons, failure to start, or intermittent power loss

• Disconnect power before service; microwaves contain high-voltage components that can retain a dangerous charge even when unplugged
• Handle the board by the edges and use ESD protection to avoid damage
• Photograph wiring and move connectors one at a time, matching orientation and latch positions

This black outer door assembly replaces a damaged or worn oven/microwave door outer panel to restore appearance and proper sealing. It's a direct-fit exterior door assembly used where the outer door is cracked, dented, or cosmetically worn. What it does

• Replaces a damaged or cracked outer door panel to restore the unit's exterior finish and integrity
• Helps the door close properly when the original outer door is warped or bent
• Stops drafts and light gaps caused by a broken or misshapen outer door
• Improves appliance appearance when the original door is scratched, dented, or otherwise cosmetically damaged

• One black outer door assembly

• Disconnect power (unplug appliance or turn off breaker) before starting any repair
• Handle glass and painted surfaces with care to avoid breakage or scratches
• Basic hand tools (screwdrivers, nut drivers) are typically required; support the door during removal/installation

This high-voltage capacitor is used in the microwave's HV circuit. It stores and releases energy to power the magnetron, helping restore consistent heating performance when the original capacitor has failed or degraded. What it does:

• Provides energy storage and filtering within the microwave's high-voltage power supply
• Helps maintain proper voltage to the magnetron for efficient heating
• Common failure symptoms can include: unit runs but does not heat; loud humming or buzzing; internal fuse blows or breaker trips on start; visible bulging or leakage at the capacitor

• One high-voltage capacitor

• Disconnect power and discharge the high-voltage capacitor before servicing; dangerous voltage can remain even when unplugged
• Note and transfer wire positions to the new capacitor and secure it with the original mounting hardware

The Control Panel Assembly is an OEM part designed for GE microwaves. As one of the main interfaces of the microwave, this white control panel assembly houses the electronic controls and touchpad membrane that allows users to operate the appliance. 

Causes of a bad control panel assembly could include exposure to spills or moisture that damage electronic components over time. It may also become worn out from frequent use of the touch controls and buttons. 

Symptoms of a bad control panel assembly include:

• Buttons or touch controls no longer functioning properly
• Display or lighting not working 
• Microwave unable to be powered on
• Preset cooking programs and timers malfunctioning

This GE replacement part is also compatible with Hotpoint, RCA, and some Kenmore models.

This door assembly replaces a damaged or worn refrigerator door to restore proper sealing, insulation and appearance. A complete outer door panel that helps keep interior temperatures stable and improves cabinet aesthetics. What it does:

• Replaces a bent, cracked or cosmetically damaged outer door to stop air leaks and reduce frost or humidity issues.
• Restores proper door alignment and hinge interface for smooth opening and closing.
• Helps maintain consistent interior temperatures by providing intact insulation and an effective seal.
• Improves appliance appearance with a factory-style finished exterior.

• Disconnect power and empty door shelves and items before starting; have a helper for safe handling.
• Remove hinge hardware and lift old door straight off hinge pins; align and secure replacement door to factory hinge locations.
• Verify gasket seating and door alignment; adjust hinge fasteners as needed for even gaps and smooth operation.