Kbfness01 Parts

This replacement gasket seals a freezer/refrigerator door panel to help maintain proper temperature and reduce energy loss. It restores a tight door seal to improve cooling consistency and prevent frost buildup. What it does:

• Forms an airtight seal around the door panel to keep cold air inside
• Helps prevent warm air infiltration that can cause frost, ice buildup, or temperature swings
• Reduces strain on the compressor by maintaining consistent cabinet temperature
• Can stop visible gaps or drafts around the door edge

• Disconnect power to the appliance before beginning any work
• Remove the old gasket carefully to avoid damaging the door or trim
• Align the new gasket in the channel and press evenly; some gaskets require gentle heating or gradual seating for a snug fit
• Inspect the seal after installation and allow time for the gasket to form to the door surface; if the gasket does not seat correctly

This replacement NC light switch restores proper operation of the appliance's light circuit, helping the light turn on and off as designed for safe use and visibility during service or operation. What it does

• Completes or breaks the light circuit when the door or control triggers the switch.
• Restores interior or indicator light operation that is dim, flickering, or nonfunctional.
• Prevents the light from staying on continuously if the switch is failed closed.
• Matches the OEM function for reliable, long-term use when replacing a worn switch.

• Disconnect power before servicing to avoid shock or injury.
• Access may require removing panels or door trim—refer to your model's service manual or tech sheet.
• Inspect wiring and connectors; replace any damaged harnesses or terminals.

A replacement front grille that restores the finished appearance at the bottom front of your appliance and helps protect internal components and air openings. Designed to match the original fit and finish for easy replacement. What it does:

• Covers and protects lower front openings and components from debris and impacts
• Helps direct airflow at the appliance base for proper ventilation
• Restores cosmetics if the original grille is cracked, broken, or missing
• Keeps loose or detached trim secured to the appliance front

• High-level task: remove access screws or clips and snap or screw the replacement grille into place
• Safety first: unplug the appliance or turn off power at the breaker before servicing
• Handle edges carefully to avoid cuts and install using the original fasteners when possible
• If mounting hardware is missing or damaged, obtain the correct screws/clips for a secure fit

This replacement bin control lever secures the refrigerator door shelf bin so it stays in place and removes easily when you need to clean or reorganize. Restores proper bin engagement and reduces rattling or inadvertent drops. What it does:

• Latches and supports the door shelf bin so it stays securely in place
• Allows the bin to release smoothly for removal and cleaning
• Stops bin wobble and rattling caused by a worn or broken lever
• Common symptom: bin falls out, won't engage, or feels loose when closing the door

• One bin control lever

• Disconnect power or unplug the appliance before starting repairs
• Empty the door bin and remove any shelves needed for access
• Remove the old lever, then snap or fasten the replacement into the same mounting points
• If resistance is met, double-check alignment—do not force parts.

This evaporator cover protects the freezer evaporator coil and helps direct cold airflow for even cooling. It restores proper airflow and prevents contact with the coil to reduce frost buildup and compressor strain. What it does:

• Shields the evaporator coil from debris and accidental contact
• Directs cold air through the freezer compartment for balanced cooling
• Helps reduce frost accumulation on the evaporator by maintaining airflow
• Can alleviate symptoms like uneven freezer temperature, excessive frost, or abnormal freezer noises

• One evaporator cover / evaporator shroud

• Disconnect power to the appliance before starting any repair
• Remove shelves, evaporator fan, or ice maker as needed for access
• Handle carefully around the evaporator and sharp sheet metal; avoid bending the cover
• Use OEM fasteners and follow manufacturer torque/placement; replace any damaged clips or screws

This replacement gasket seals a refrigerator utility bin to help keep contents contained and reduce moisture transfer and odors. Restores a tight bin fit for better food storage and helps prevent minor leaks. What it does:

• Seals the perimeter of the utility bin to limit air and moisture exchange
• Helps keep loose items and liquids contained inside the bin
• Reduces frost or condensation buildup caused by a worn seal
• Can improve refrigerator hygiene by limiting odor migration

• Unplug the appliance or disconnect power before servicing
• Remove the bin and clean mating surfaces before installing the new gasket
• Press the gasket evenly into the bin channel; ensure a full, even fit without gaps
• If the gasket is stiff, warm it briefly to ease installation; avoid open flames or overheating

This meat pan front assembly replaces the front panel of the refrigerator meat pan/deli drawer, restoring a proper seal and smooth drawer operation. It helps keep cold air in the drawer and protects stored meats. What it does:

• Replaces a cracked, warped, or missing meat pan front to restore drawer alignment and appearance
• Helps maintain proper cold storage in the deli/meat compartment by sealing the drawer edge
• Reduces rattling or sticking when opening and closing the meat/deli drawer
• Prevents food from contacting damaged trim and makes cleaning easier

• One meat pan front assembly

• High-level swap: remove drawer, detach old front, install replacement, and reinsert drawer
• Handle parts gently to avoid cracking the plastic during installation
• Unplug or disconnect power before working near electrical components as a safety precaution
• If clips or screws are damaged, replace them with OEM fasteners for a secure fit

This light cam assembly positions and secures the interior light mechanism so the appliance light operates correctly when the door is opened. Replaces a worn or broken cam to restore proper light activation and fit. What it does:

• Holds and indexes the interior light/lens assembly so the light turns on/off reliably with door movement
• Prevents the light or lens from rattling or becoming loose inside the cabinet
• Restores proper alignment when a broken or worn cam causes intermittent or non-functioning interior lighting
• Works with the door/light linkage to ensure consistent contact with the light switch

• Disconnect power to the appliance before starting any repair
• Remove the light lens and/or inner trim panel to access the cam; keep all fasteners for reassembly
• Inspect mating parts (lens, switch, brackets) and replace if damaged to avoid repeat failures
• Test light and door operation after installation to confirm correct alignment and function

A single replacement screw used to secure appliance panels and components. Restores proper fastening to reduce vibration and keep parts aligned for safe, quiet operation. What it does:

• Fastens panels, brackets or assemblies to the appliance frame
• Helps eliminate rattling or looseness from unsecured parts
• Maintains component alignment for reliable operation
• Matches the OEM fastening point and thread where specified

• Disconnect power and water before beginning work
• Use the correct screwdriver or bit to avoid stripping the head
• Install in the original location and hand-start threads to avoid cross-threading
• Do not overtighten; tighten to snug fit per service literature

This genuine replacement door hinge lets a refrigerator or freezer door pivot smoothly and stay properly aligned so the door seals and closes correctly. Designed for direct fit where the original hinge is worn or damaged. What it does

• Provides a secure pivot point so the door opens and closes smoothly
• Restores proper door alignment to prevent gaps and uneven sealing
• Helps stop sagging or drooping doors that catch or don't latch
• Reduces stress on the door gasket by keeping the door square to the cabinet

• One door hinge

• Disconnect power and remove any stored items from the door before starting
• Support the door while removing the old hinge to prevent damage or dropping
• Use the same screw locations; tighten hardware securely but avoid over-torquing
• Check hinge screws and door strike adjustment

This crisper pan is the replacement bin that supports and contains produce in the refrigerator's crisper drawer area, helping keep fruits and vegetables organized and reducing spills. What it does:

• Provides a stable bin to hold produce and keep items contained in the crisper area
• Catches juices and small debris to help prevent leaks and messes inside the fridge
• Restores proper fit and support when a cracked or damaged pan no longer holds a crisper drawer
• Helps the crisper drawer slide and seat correctly when the pan is intact

• One crisper pan

• Remove contents from the crisper area and slide out the drawer before replacing the pan
• Lift and align the replacement pan into the crisper drawer tracks until it seats fully
• Wash the new pan with mild soap and water before first use
• Handle carefully to avoid damage; wear gloves if edges are sharp