Kbfness01 Parts

Size: 1/4 inch.

The Condenser Fan Motor is an OEM part for Whirlpool brand bottom-mount refrigerators. This motor powers the condenser fan which dissipates heat from the refrigeration system coils, maintaining cool interior temperatures.

Causes of failure include normal bearing wear from continuous rotations, or buildup obstructing free blade movement. 

Symptoms of a faulty motor include:  

• Elevated interior temperatures and frost propagation issues   
• Extended run times and higher energy consumption
• Grinding or buzzing noises emanating from the refrigeration system area

This Whirlpool replacement restores efficient heat removal and preserves food freshness. Compatible with KitchenAid, Maytag, and some Kenmore models too, it prevents future repair bills.
 

The Refrigerator Door Switch is an OEM replacement part for Whirlpool refrigerators. It is a crucial component that monitors the opening and closing of the refrigerator door, ensuring proper operation and energy efficiency.

Causes of a bad Door Switch can include physical damage, wear and tear over time, or electrical malfunctions.

Symptoms of a faulty Refrigerator Door Switch include:

• Interior lights remaining on even when the door is closed
• Compressor failing to cycle on and off as intended
• Condensation or frost buildup due to improper sealing
• Error codes or warning lights related to the door switch

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models.

This rubber grommet cushions and seals a wiring, hose, or shaft opening to help prevent abrasion, reduce vibration, and maintain a snug fit for quieter, safer appliance operation. What it does:

• Protects wiring, hoses, or moving shafts from chafing and wear
• Helps seal openings to limit water, air, or lint intrusion
• Dampens vibration and reduces noise where panels or components meet
• Worn or damaged grommets can cause rubbing sounds, visible wear, loose hoses, or leaks

• Disconnect power (and water if applicable) before beginning any repair
• Push-fit replacement in most applications; a small screwdriver or needle-nose pliers can help with removal or alignment
• Inspect surrounding seals, hoses, and mounting surfaces and replace damaged parts as needed

Replacement icemaker assembly that produces, harvests and deposits ice into the freezer bin, restoring automatic ice production so the refrigerator refills the ice bin on its normal cycle. What it does:

• Freezes, ejects and drops standard ice cubes during the appliance's harvest cycle.
• Replaces a failed or intermittently working icemaker.
• Common symptoms this part addresses: no ice production, slow ice production, ice stuck in the mold, or ice that won't eject.
• Matches original fit and operation to work with the refrigerator's existing fill tube and wiring.

• Disconnect power and turn off the water supply before beginning any service.
• Access the icemaker through the freezer compartment; follow the manufacturer's service manual for removal and mounting steps.
• After installation, restore power and water, run the icemaker test cycle, and discard the first few batches of ice.
• If you notice leaks or the icemaker still doesn't run, verify the water inlet valve, fill tube and electrical connections.

This solenoid is the electromechanical actuator that opens and closes a valve or latch to control flow or movement inside compatible appliances. Replacing a worn solenoid restores reliable on/off operation and responsive dispensing or cycling. What it does:

• Converts electrical signals into mechanical motion to open or close a valve or latch
• Controls water or ice fill cycles, dispenser flow, or other timed movements in the appliance
• Commonly linked to symptoms like no water/ice dispensing, intermittent operation, or a clicking/no-response during a cycle
• Works with the appliance control to ensure precise on/off control where used

• Disconnect power to the appliance before starting any repair
• If the solenoid controls water, turn off the water supply and relieve pressure before disconnecting lines
• Handle electrical connectors carefully; avoid pulling on wires—disconnect at the plug
• Verify correct part fit and function after installation; manufacturer instructions for detailed service procedures

This mullion rail is the flip strip on the refrigerator door that bridges the gap between the doors. Replacing a worn or broken rail restores a tight seal and helps prevent warm spots and condensation at the center seam.

• Flips closed to create the sealing surface between French doors
• Helps reduce air leaks and moisture at the center joint
• Common signs: door won't close smoothly or pops back open
• Moisture/condensation or frost near the middle of the doors
• Visible cracks or a loose/broken hinge on the flipper rail

• Disconnect power to the refrigerator before servicing
• Open the doors; remove any screw covers and the top/bottom mounting screws
• If present, disconnect the mullion's wire connector and note routing
• Mount the new rail using existing hardware; verify smooth flip action and correct gasket alignment

This is the appliance's main electronic control board—the central "brain" that manages power, timing, and communication between the user controls and internal components to run cycles reliably and restore normal operation when the original board fails. What it does:

• Distributes power and controls timing for key loads (motors, valves, heaters, fans) per program logic
• Communicates with the user interface and sensors to execute selected cycles/settings
• Monitors system status and may store/trigger diagnostic error codes
• Failure symptoms can include no power, won't start, random resets, unresponsive controls, blank display, or erratic cycle progress

• One electronic control board assembly

• Disconnect electrical power before servicing; verify no voltage is present
• Handle the board by the edges and use ESD precautions to protect circuitry
• Photograph/label wire connectors; transfer plugs one at a time and seat fully
• Reinstall covers, restore power, and run the model's diagnostic/test routine to verify operation

This cam door stop is a replacement door cam that helps control door travel and alignment, restoring secure closing and smooth operation. It prevents over-rotation and helps the latch engage correctly for reliable everyday use. What it does:

• Limits door rotation so the door closes and latches properly
• Keeps the door aligned to prevent rubbing, scraping, or uneven gaps
• Reduces slamming and helps maintain consistent latch engagement
• Common fix when a door drops, won't stay closed, or closes unevenly

• Disconnect power to the appliance before beginning any repair
• Inspect surrounding door components (hinge, latch) for wear during replacement
• Wear gloves and eye protection to avoid cuts from sharp edges

The Cabinet Trim is an OEM replacement part for Whirlpool refrigerators. It is designed to provide a seamless and finished appearance to the side of your refrigerator cabinet. It covers any exposed edges or gaps, creating a polished look and protecting the appliance.

A bad cabinet trim can occur due to wear and tear, damage, or improper installation. If you notice symptoms such as loose or missing trim, gaps between the refrigerator and the surrounding cabinetry, or an unfinished appearance, it may be time to replace the cabinet trim.

Symptoms of a bad cabinet trim include:

• Loose or missing trim pieces
• Gaps between the refrigerator and surrounding cabinetry
• Unfinished or unappealing appearance

Repair your refrigerator by replacing the faulty or damaged cabinet trim with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

Replacement screw that secures panels, brackets, and other components inside your appliance, keeping assemblies tight and aligned. Replace missing or stripped hardware to eliminate looseness, reduce vibration, and restore a solid, factory-fit hold.

• Fastens panels, brackets, trim, or internal components
• Helps maintain alignment and reduce rattling/vibration
• Replaces missing, loose, rusted, or stripped hardware
• Common signs: stripped head/threads, loose panel, buzzing/rattling noises

• Disconnect power before service; shut off gas/water if applicable
• Match to the original screw; start threading by hand to avoid cross-threading
• Use the correct driver size to prevent stripping
• Tighten snugly; do not overtighten. If it won't hold, inspect the receiving hole/clip

This thermistor is the refrigerator temperature sensor that monitors cabinet temperature and sends readings to the control board so the appliance maintains consistent cooling. Replaces a failed sensor to restore proper temperature sensing and cycling. What it does:

• Senses internal refrigerator/freezer temperature and reports readings to the control board.
• Helps the control board regulate compressor and fan cycles for consistent cooling.
• Commonly fails when readings are erratic or the refrigerator runs too cold or too warm.
• Safe, widely reported symptom: temperature not stable or incorrect defrost behavior.

• One thermistor temperature sensor.

• High-level replacement: access may require removing interior liners or control covers.
• Disconnect power before testing or replacing to avoid shock or damage.
• Handle the sensor and wiring gently to avoid damage; secure connectors fully.