Kbudt4265e Parts

A small flat mounting washer that secures fasteners and provides a stable spacer for assemblies. Replaces worn or missing washers to restore proper part alignment and prevent movement. What it does:

• Acts as a flat spacer under a nut or bolt to distribute load and prevent loosening
• Keeps components aligned and properly spaced to reduce wear
• Helps stop rubbing or metal-on-metal contact that can cause noise or damage
• Commonly needed when fasteners are loose, panels shift, or assemblies wobble

• One flat mounting washer

• Shut off power to the appliance before beginning any service
• Remove any panels or components necessary to access the fastener; use hand tools appropriate for the fastener type
• Replace the washer with the same orientation and retighten the fastener to avoid over-torquing

This bottom refrigerator hinge secures and supports the lower door, restoring proper alignment and smooth opening/closing. It replaces a worn or damaged hinge to stop sagging doors and reduce binding or uneven gaps. What it does:

• Supports the lower edge of the refrigerator door and bears door weight
• Acts as the pivot point for normal door swing and alignment
• Helps stop door sag, rubbing, or uneven sealing caused by a worn hinge
• Reduces binding, scraping, and noise when opening or closing the door

• Turn power off to the appliance and remove food from the door area before starting
• Support the door while removing and installing the hinge to prevent dropping or damage
• Use correct-size tools and follow OEM torque guidance; avoid over-tightening fasteners

The Storage Bin is an OEM part for Whirlpool refrigerators. It provides organized, adjustable storage space in the refrigerator door. The bin has been designed to hold condiments, beverages, snacks, and other small refrigerator items. 

Causes of a bad storage bin can include broken hinges or mounting clips, cracks or holes in the plastic material, or a bent or warped bin that no longer sits securely or organizes items well.

Symptoms of a bad storage bin include:

• Items falling out of the bin 
• Bin not sitting flush or securely in the door
• Difficulty removing or replacing the bin
• Cracked or damaged plastic that affects functionality

This OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore refrigerator models.

The Condenser Fan Motor is an OEM part for Whirlpool brand bottom-mount refrigerators. This motor powers the condenser fan which dissipates heat from the refrigeration system coils, maintaining cool interior temperatures.

Causes of failure include normal bearing wear from continuous rotations, or buildup obstructing free blade movement. 

Symptoms of a faulty motor include:  

• Elevated interior temperatures and frost propagation issues   
• Extended run times and higher energy consumption
• Grinding or buzzing noises emanating from the refrigeration system area

This Whirlpool replacement restores efficient heat removal and preserves food freshness. Compatible with KitchenAid, Maytag, and some Kenmore models too, it prevents future repair bills.
 

The Water Supply Tube is an OEM part for Whirlpool refrigerators. This tube transports water to supply the automatic ice maker. It ensures a consistent water flow to produce batches of ice on demand.

Causes of a bad water supply tube can include cracks or leaks from regular use and flexing over time. Mineral buildup inside the tube may also restrict water flow.

Symptoms of a bad water supply tube include:

• Ice maker not working or producing ice slowly
• Water droplets under the refrigerator
• Noticeable cracks or splits in the tube

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This replacement screw is a small fastener used to secure appliance panels and components. It restores lost or damaged screws so parts stay mounted and appliances run quietly and safely. What it does:

• Secures panels, trim, brackets or housings to prevent rattling and movement
• Replaces missing or stripped screws that allow parts to come loose
• Helps maintain correct alignment of assemblies for safe operation
• Small hardware solution for common repair and reassembly needs

• Disconnect power to the appliance before servicing
• Use the correct screwdriver or driver bit to avoid cam-out or damage
• Do not overtighten; snug until secure to avoid stripping threads or cracking plastic
• Keep small parts away from children and pets

This cover is the replacement access panel that protects internal components and restores the appliance's exterior appearance. It keeps wiring and parts enclosed while maintaining proper airflow and safety. What it does:

• Covers and protects internal components from dust, debris, and accidental contact
• Restores the appliance's exterior finish for a clean, finished look
• Reduces rattling by securing the opening where internal parts are housed
• Helps maintain proper airflow paths and prevents obstruction near service areas

• Unplug the appliance or disconnect power before beginning any work.
• Remove any screws or clips holding the old cover; keep fasteners for reuse if possible.
• Align the cover with mounting slots and secure with the original fasteners; do not overtighten.
• If edges are sharp or fit is tight, use gloves and proceed slowly to avoid damage or injury.

This inlet fitting connects the household water supply to the appliance's waterline, providing a secure, leak-resistant connection for ice makers and water dispensers. Use it to replace damaged or leaking supply fittings and restore proper water flow. What it does:

• Provides a sealed connection between the home's water supply and the appliance waterline
• Replaces cracked, corroded, or leaking inlet fittings that cause drips or loss of water supply
• Helps restore proper water flow to ice makers and dispensers when the original connector fails
• Compatible with standard waterline tubing used on many Whirlpool refrigeration applications

• Turn off the household water supply and unplug the appliance before beginning any work
• Inspect tubing for damage and replace the waterline if brittle or kinked to ensure a reliable seal
• Use appropriate thread sealant or ferrules per the original installation type; hand-tighten then secure per manufacturer guidance

This door hinge secures and guides a refrigerator door so it opens and closes smoothly, restoring proper door alignment and a tight seal. It's a direct-fit replacement when a worn or damaged hinge causes sagging or misalignment. What it does:

• Supports the refrigerator door and provides a pivot point for smooth opening and closing
• Restores proper door alignment and helps maintain an even door seal
• Reduces sagging, rubbing, or uneven gaps that prevent full closure
• Stops squeaks and sticking caused by worn hinge surfaces

• One door hinge

• Always unplug the appliance or shut off power to the unit before starting any repair
• Remove food and secure the door; have a helper support the door during removal and installation
• Use common hand tools; keep screws and mounting hardware organized for reassembly
• Check door alignment and adjust as needed after installation; replace any worn mounting hardware if present

This coupling connects the dishwasher motor to the pump assembly so the wash pump can turn and circulate water. Replaces a worn or broken drive coupling to restore pump drive and normal wash performance. What it does:

• Transfers rotational force from the motor to the pump impeller so water is circulated during the wash cycle.
• Commonly fails from wear or cracking, which can cause little or no water circulation or noisy operation.
• Helps stop slipping between motor and pump that can lead to poor cleaning or intermittent operation.
• Fits into the pump/motor interface; designed to match OEM fit and function.

• One replacement coupling (1 piece)

• Disconnect power and water before beginning any repair.
• Access typically requires removing the dishwasher lower access panel and separating the pump/motor assembly; follow the manufacturer service manual.
• Inspect surrounding seals and fasteners and replace any damaged components while the unit is disassembled.

This is a replacement mounting bracket designed to secure internal components in compatible Bosch appliances. It restores proper alignment and support for attached parts to reduce wobble, rattling, or misalignment. What it does:

• Provides secure attachment point for panels, assemblies, or hardware inside the appliance
• Restores proper alignment when a bent, broken, or missing bracket causes vibrations or loose parts
• Helps stop rattling, shifting, or intermittent contact caused by a damaged support bracket
• Matches OEM fit to maintain factory spacing and clearances when installed correctly

• One mounting bracket

• Install only with the appliance powered off and disconnected from its electrical supply
• Use proper fasteners and torque to avoid stripping threads or cracking surrounding components
• Verify orientation and mating surfaces before tightening; replace any damaged screws or clips

This is a push-button replacement used on compatible Bosch appliances to restore proper user-control operation and tactile feedback. Install the button to replace a broken, worn, or missing control button and regain reliable front-panel input. What it does

• Provides a tactile surface for operating a specific front-panel control or selector
• Replaces cracked, stuck, or missing buttons that prevent reliable input
• Restores proper actuation so the underlying switch can be pressed cleanly
• Helps avoid accidental presses from damaged or loose buttons

• One push-button

• Disconnect power to the appliance before attempting any repairs
• Usually snaps into the front panel; remove the control panel or trim if needed to access the button
• Inspect the underlying switch for damage and replace it if the button alone does not restore function