Kcgk306 Parts

This holder (ORF) secures the associated component in place to keep the appliance operating smoothly and help prevent movement or noise from a loose part. It's a simple replacement when the original is cracked, worn, or missing. What it does:

• Holds and stabilizes the related OEM component in the appliance assembly
• Replaces cracked, broken, or missing holders that cause rattling or improper alignment
• Restores proper fit so adjacent parts engage and move as intended
• Helps prevent shifting or wear that can lead to additional part damage

• Disconnect power and remove any food, dishes or removable parts before servicing
• Use basic hand tools and follow the appliance service manual for access instructions
• Handle plastic parts carefully to avoid over-torquing fasteners or creating stress cracks

This surface ignitor provides the ignition source for a gas cooktop surface burner, restoring reliable lighting so burners light quickly and evenly. It's a direct-fit replacement designed for the range's factory ignition system. What it does

• Supplies the ignition energy for a surface burner so gas ignites when a burner is turned on
• Replaces a cracked, damaged or non-functioning ignitor that won't light the burner
• Helps stop symptoms like repeated clicking, weak ignition, or burners that won't light
• Works with the cooktop's original ignition module and gas valve to ensure normal burner operation

• Disconnect power to the appliance before starting any service to avoid shock risk
• Turn off the gas supply and allow parts to cool before accessing the cooktop
• Handle the ignitor carefully—ceramic and tip are fragile and can break if dropped or bent
• After installation, restore power/gas and verify each burner lights properly; do not attempt repairs beyond your skill level

This surface ignitor is the replacement spark electrode that lights a gas cooktop burner, restoring reliable ignition so burners spark quickly and cooking can resume. Designed to match the original fit and function. What it does:

• Creates the spark needed to ignite a gas burner when the knob is turned
• Replaces cracked, broken, or non-sparking electrodes that cause no-light or delayed-light symptoms
• Stops continuous clicking or intermittent sparking caused by a damaged ignitor
• Matches OEM mounting and electrical connection points for proper operation

• One surface ignitor

• Disconnect power and shut off the gas supply before beginning work
• Handle the ceramic electrode carefully; avoid bending or twisting the tip
• Remove burner cap/grate and mounting screws to access and replace the ignitor
• Test ignition after reconnecting power and restoring gas per appliance manufacturer's safety instructions

This burner head fits on a gas range surface to distribute gas for the cooktop flame and restore even, consistent heating. Replaces a damaged or corroded burner head to improve ignition and burner performance. What it does:

• Directs gas flow to produce a stable, even flame for cookware heating
• Restores proper burner ignition when flame is weak or uneven
• Prevents flame distortion caused by dents, corrosion, or clogged ports
• Helps eliminate sputtering or intermittent heating from a damaged head

• Turn off the appliance and shut off gas supply before servicing
• Allow components to cool fully and disconnect power if applicable
• Remove burner cap and grate, then lift out the old head and set the new head in place; verify alignment before reassembly
• If you smell gas or experience ignition issues after installation, stop.

This speaker module provides audible tones and chimes used by the appliance to signal cycle progress and user alerts. It restores clear sound feedback so you can hear cycle completion, alerts, and error tones. What it does:

• Produces the appliance's audible chimes, beeps, and alert tones
• Signals cycle completion and user prompts with clear sound
• Helps indicate error codes and status changes through audible alerts
• Interfaces with the main control to provide user feedback

• Disconnect power to the appliance before servicing to avoid electrical shock
• Handle the module and wiring harness carefully; avoid static discharge and bent pins
• Reconnect the wiring harness fully and secure the module in its mounting location
• Test the appliance after installation to ensure audible tones function correctly

This replacement manifold assembly routes water through the appliance to maintain proper operation and consistent performance. It restores correct fluid distribution for cleaning and rinsing so cycles run as expected. What it does:

• Directs water to internal spray ports and chambers for normal cycle operation
• Ensures even water flow to improve cleaning and rinsing performance
• Stops leaks or flow loss when a cracked or damaged manifold is replaced
• Resolves symptoms like uneven cleaning, water pooling, or error codes related to water distribution

• One manifold assembly as shown

• Disconnect power and shut off water supply before starting repair
• Inspect and replace any worn gaskets, seals, or mounting hardware as needed
• Tighten fittings to OEM torque; avoid overtightening plastic fittings
• Run a test cycle and check thoroughly for leaks after installation

This switch harness is a replacement electrical harness assembly that connects the range/oven control to the gas valve, restoring reliable signal and ignition control for safe burner and oven operation. What it does:

• Routes electrical signals between the appliance control and the gas valve so the valve opens when the control calls for heat
• Restores proper ignition and burner operation when a damaged harness is preventing valve activation
• Helps eliminate intermittent or no-heat symptoms caused by broken, corroded, or loose connector wires
• Maintains a secure, OEM-style connector interface for consistent electrical performance

• Always disconnect power and shut off gas supply before servicing gas appliances
• Inspect connectors and harness routing; replace only if the part matches the OEM connector style and pin count
• Tighten connectors firmly but avoid over-bending or pinching the wires during installation

This is a #8-18 x 1.125-inch screw used to fasten appliance panels and components. It provides a secure, low-profile hold so parts stay aligned and quiet during normal use. What it does

• Secures panels, brackets, trim pieces, or internal components to prevent movement.
• Restores proper fastening when original fasteners are missing, stripped, or damaged.
• Helps stop rattling, misalignment, or loose parts caused by a failed or missing screw.
• Compatible with common appliance sheet-metal and component mounting points.

• One #8-18 x 1.125 screw.

• Disconnect power before servicing any electrical appliance.
• Use the correct screwdriver or driver bit to avoid stripping the head.
• Tighten until snug; avoid over-torquing which can strip threads or deform mating parts.
• If the original screw had a specific washer, clip, or threadlocker, reuse that hardware or equivalent.

This ignitor retaining clip secures the oven or range ignitor to the burner assembly so the ignitor stays properly positioned for reliable ignition. It's a small replacement part that restores proper ignitor mounting and alignment. What it does:

• Holds the oven/range ignitor in place on the burner assembly to maintain correct positioning
• Helps ensure consistent ignition by preventing the ignitor from shifting or coming loose
• Commonly replaced when the original clip is broken, bent, or missing
• Fits directly where the factory clip secures the ignitor to the burner housing

• Turn off power and gas supply to the appliance before starting any repair
• Access typically requires removing the oven burner or inner panel; follow the manufacturer service instructions
• Use appropriate tools to remove the old clip and secure the new clip without over-bending

This is a genuine replacement screw used to secure appliance panels and components. It restores proper fit and prevents loose panels, rattling, and parts that shift during operation. What it does:

• Fastens trim, panels, brackets, or control assemblies in place
• Stops vibration-related noise caused by loose hardware
• Helps maintain safe, stable operation by keeping components secured
• Restores original fit and alignment after repair

• Use the matching screwdriver or driver bit to avoid stripping the head
• Tighten until snug; do not over-torque to prevent thread or component damage
• Disconnect power to the appliance before accessing internal components
• Replace all matching fasteners for best results