Kcgk306 Parts

This replacement drip tray catches and channels excess water beneath the appliance to help prevent puddles and floor damage. It restores the original drain path so condensate and minor leaks drain safely away. What it does:

• Collects and directs water away from the appliance base to prevent pooling on the floor
• Helps contain leaks from defrost or drain systems to limit damage to surrounding areas
• Can reduce musty odors and water stains caused by trapped moisture
• Fits into the appliance base to restore original water collection and drainage

• One drip tray

• Disconnect power to the appliance before servicing
• Remove lower access panels or kickplate as needed to access the tray
• Align the tray with the chassis rails or mounting tabs and slide or snap into place
• Inspect surrounding seals and drain paths; if you find corrosion or other damage, replace those parts as needed.

This plenum-air is the replacement air plenum that routes and directs airflow for proper oven/vent ventilation, helping maintain consistent temperature and safe exhaust flow. It restores correct airflow where the original plenum is cracked or damaged. What it does:

• Directs heated air and exhaust between the oven cavity and ventilation channels to support proper airflow.
• Helps prevent uneven cooking or baking caused by disrupted air circulation.
• Reduces risk of overheating or smoke caused by restricted or broken airflow paths.
• Restores the oven's designed exhaust flow when the original plenum is bent, cracked, or missing.

• Disconnect power (and gas, if applicable) before beginning any repair.
• Handle carefully; metal edges may be sharp. Wear gloves and eye protection.
• Verify alignment with adjoining ducts and ensure seals and mounting points are secure.
• Use the original fasteners or OEM-replacement hardware; do not force-fit or overtighten.

This gas burner valve controls the flow of fuel to a cooktop burner, restoring proper flame adjustment and heat control for safe, consistent cooking. Replacement helps resolve control and ignition issues. What it does:

• Regulates gas flow to a single surface burner so you can adjust flame size
• Enables reliable ignition and stable flame during normal use
• Stops uncontrolled high or low flames caused by a failing valve
• Helps address symptoms like burners that won't light, won't stay lit, or have poor flame control

• 1 burner valve

• Turn off the appliance, shut off the gas supply, and disconnect power before beginning work
• Only install if this exact part matches your model's parts list; follow the manufacturer service instructions
• Check all gas fittings for leaks after installation and before returning appliance to service

This orifice spud is the small gas fitting that meters fuel to a stovetop or oven burner, helping maintain the correct flame size for safe, efficient cooking. It replaces a damaged or worn spud to restore proper burner operation. What it does

• Controls gas flow to the burner so the burner lights and maintains a steady flame
• Can resolve weak, uneven, or hard-to-light burners when the spud is clogged, damaged, or worn
• Works with the burner tube and orifice for correct fuel delivery
• Designed to match OEM fit and function for affected gas cooking appliances

• One orifice spud

• This is a gas appliance part: turn off the gas supply and electrical power before servicing
• Access may require removing burner grates, caps, and burner components; keep parts organized for reassembly
• Inspect surrounding seals and tubing for damage when replacing; tighten fittings securely but avoid overtightening

The LP Conversion Kit is an OEM part for Whirlpool gas cooktops. This kit allows a range designed for natural gas to be safely converted for use with liquid propane gas.

The conversion kit includes all necessary components to modify the gas valve, burner heads, and airflow to accommodate propane fuel. This ensures proper gas-air mixture and optimal combustion when operating on liquid propane.

Causes of needing conversion include switching to propane fuel when the range was originally set up for natural gas.

Symptoms of needing an LP conversion include:

• Inability to ignite burners or oven pilot light on propane
• Yellow burner flames and decreased heat output
• Gas smell from the range

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This is a replacement cabinet corner trim piece designed to restore the finished edge and appearance of your refrigerator cabinet. It covers and protects the cabinet corner where trim has cracked, broken, or gone missing. What it does

• Replaces a damaged or missing corner trim to restore a clean, finished look
• Covers exposed cabinet edges to help prevent snagging or minor moisture intrusion
• Helps keep adjacent trim and panels aligned and seated correctly
• Commonly used when trim is cracked, chipped, loose, or cosmetic finish is worn

• One cabinet corner trim piece (single)

• High-level replacement: usually snaps or presses into place; remove adjacent trim or panels if needed for access
• Use basic hand tools as required; avoid excessive force to prevent damage to surrounding panels
• If working near electrical components or lights, unplug the appliance before beginning work
• Wear gloves to protect hands from sharp edges and to improve grip during removal/installation

This orifice spud secures the burner orifice and helps direct gas from the valve to the burner for proper ignition and stable flames. Replace a worn or damaged spud to restore correct burner performance. What it does:

• Holds the burner orifice in place and aligns it with the gas valve for consistent gas flow
• Helps maintain proper flame size and stability for safe cooking
• Can be replaced when a burner fails to light, produces a weak or uneven flame, or when the spud is physically damaged
• Supports correct sealing at the orifice to reduce risk of gas leaks when installed correctly

• One orifice spud

• Shut off gas supply and electrical power before starting work; follow local codes and safety practices
• Access typically requires removing the cooktop or burner assembly; handle components carefully to avoid damage
• Inspect the orifice and surrounding seals/gaskets and replace if damaged; this part alone may not fix unrelated valve or igniter issues

This cooktop top surface assembly provides the finished cooking surface and mounting for burners and controls, restoring the look and function of the appliance. It's the exterior top panel that supports the cooktop components and contains cutouts for burners and control interfaces. What it does

• Replaces a damaged, warped, or cosmetically worn cooktop top surface to restore a level cooking area
• Provides the mounting surface and cutouts for burners, grates, and control components
• Helps maintain proper alignment and spacing of cooktop parts for safe operation
• Stops air and debris from entering the cabinet through the cooktop opening

• One cooktop top surface assembly

• Disconnect power and gas before attempting removal or installation
• Handle with care to avoid chipping or scratching finished surfaces during installation

This manifold directs gas from the oven's gas valve to the burner ports, restoring proper gas flow for consistent burner operation. Replaces a worn or cracked manifold to help burners light evenly and maintain safe combustion. What it does

• Routes gas from the main valve to the oven/burner ports for ignition.
• Restores even burner flames when a cracked or clogged manifold causes weak or no flame.
• Helps stop intermittent heating when distribution passages are blocked or damaged.
• Supports proper sealing and alignment for safe gas flow to burners.

• Manifold assembly

• Turn off gas supply and electrical power before starting; follow all safety precautions.
• Inspect gaskets, seals and mounting hardware; replace damaged components as needed.
• Tighten fittings to manufacturer torque specs and test all connections for leaks with a gas-safe method.