Kcgk306 Parts

This gas tubing provides the rigid connection between the appliance's gas valve and burner assembly, restoring a secure fuel path for safe ignition and operation. Designed to match OEM fit and routing. What it does:

• Replaces damaged or corroded gas tubing to stop leaks and restore proper gas flow
• Ensures a sealed connection between the gas valve and burner manifold
• Helps resolve symptoms like gas odor, failure to ignite, or intermittent burner operation
• Maintains correct routing to prevent kinks or contact with hot components

• Always shut off the gas supply and unplug the appliance before starting work
• Use proper fittings and torque to manufacturer spec; inspect all connections for leaks with a soap solution or approved leak detector
• Do not modify the tubing; replace with OEM-specified part for safe operation

This capacitor stores and releases electrical energy to help the refrigerator's compressor start and run smoothly. Replacing a weak or failed capacitor can restore reliable compressor startup and more consistent cooling performance.

• Provides the electrical boost/phase shift needed for compressor motor startup and steady operation
• Works with the start device to deliver proper current to the compressor
• Failure symptoms can include clicking or humming near the compressor, poor cooling, or short cycling
• May cause the compressor not to start after power interruptions when weak or failed

• Disconnect power before servicing any electrical component
• Safely discharge the capacitor before handling; avoid touching terminals
• Note wire positions and terminal markings; transfer leads one at a time to the matching terminals
• Secure the capacitor in its mounting/bracket to prevent vibration damage

This compressor with mounting clip is the sealed refrigeration compressor assembly that circulates refrigerant to keep your refrigerator cold. Replacing a failed compressor restores the system's ability to cool when repairable. What it does:

• Compresses refrigerant vapor to maintain proper cooling cycle; primary sealed-system pump.
• Commonly linked to symptoms like no cooling, refrigerator runs but temperature rises, or compressor not cycling.
• Works as the sealed-system component; requires correct match to refrigerant and system specifications.

• One compressor assembly with mounting clip as shown.

• Replacement involves sealed-system work.
• Disconnect power before starting; follow all electrical safety practices.
• Use proper tools and gaskets/hoses; pressure-test and leak-check after repair.

This hex head screw secures panels, brackets, and small components on appliances, restoring proper fit and stability. It's a direct replacement fastener when an original mounting screw is missing, loose, or damaged. What it does:

• Secures panels, brackets, trim, and internal components to prevent rattling or movement
• Replaces stripped, missing, or damaged mounting screws that cause loose parts or misalignment
• Restores reliable mechanical fastening so doors and panels sit flush and operate correctly
• Works as a general-purpose appliance mounting screw when original fasteners are worn

• Always disconnect power to the appliance before starting any repair
• Match the screw to the original location and thread engagement; start by hand to avoid cross-threading
• Use the correct driver or socket for the hex head and tighten until snug—do not overtighten
• If the original hole or threads are damaged, repair or replace the mating hardware before installing the screw

The Vent Access Cover is an OEM part for Whirlpool cooktops. It is the rear ventilation cover located at the back of the oven cavity. This cover plays an important role in properly directing the exhaust of combustion gases and ventilating heated air outside of the home.

Causes of a bad vent cover can include damage from impact, warping due to overheating, or broken mounting points interfering with a tight seal. 

Symptoms of a bad vent cover include:

• Incomplete combustion of fuels resulting in efficiency and safety issues  
• Reduced airflow and ventilation compromising the oven function
• Gaps or openings that allow exhaust recirculation or intrusion of debris

 This OEM Whirlpool vent cover is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Knob is an OEM part for Whirlpool ranges. This knob allows for precise adjustment and selection of temperature settings on the range. Its ergonomic design makes navigation simple and intuitive, enabling convenient access to all functions directly from the control panel. 

Causes of a bad knob can include cracks or chips forming from overtightening, continual exposure to heat, or impact from food packages or cookware. 

Symptoms of a bad knob include: 

• Failure to lock temperature settings 
• Unexpected changes in cooking temperature
• Knob positions not correlating to actual burner/oven settings

This OEM Whirlpool replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This switch assembly harness connects the oven's gas valve to the control and safety switches, restoring proper signal and gas valve operation. It's a direct-replacement harness used on compatible Whirlpool gas ranges to fix ignition and valve control issues. What it does:

• Routes electrical signals between the gas valve and oven control/safety switches
• Enables the gas valve to open when the control calls for heat
• Helps resolve problems like no ignition, oven not heating, or intermittent valve response
• Matches OEM connector and wire grouping for a plug-and-play replacement when compatible

• One switch assembly harness

• Disconnect power and shut off the gas supply before beginning work
• Avoid bending or pinching wires; secure harness per original routing

This burner valve is a direct-replacement gas control valve that regulates fuel flow to a single cooktop burner, restoring proper ignition and flame control for safe, consistent cooking performance. What it does:

• Controls gas flow to one burner so the burner ignites and adjusts flame size
• Replaces a failed or leaking valve that can cause no gas flow or inability to light
• Helps stop unwanted gas flow when the control knob is off
• Restores normal knob-to-flame response for accurate heat control

• Turn off gas supply and unplug the appliance before servicing.
• Access may require removing the cooktop or control panel; follow OEM disassembly steps.
• After installation, check all connections for leaks and test burner operation with proper ventilation.

The Surface Burner Cap Set is an OEM part specifically designed for Whirlpool cooktops. These burner caps make direct contact with cookware during heating.

Causes of faulty caps include scratches and pits diminishing heat conduction over years of constant use. Metal integrity can degrade gradually.

Symptoms of a bad cap set include:

• Slow, inefficient cooking with prolonged cook times   
• Scorching or burning more likely due to poor contact
• Aesthetic deterioration with discoloration and wearing away

This OEM Whirlpool part is compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore cooktop models as well.

The Gas Range Knob is an OEM part for Whirlpool gas ranges. It is the control interface that allows selecting different temperature settings for each gas burner on the cooktop. 

Symptoms of a bad gas range knob include:

• Difficulty turning the knob to desired burner settings 
• Knob dial numbers fading or becoming illegible
• Loose or wobbly knob that cannot be set securely 
• Missing or broken knob that makes burner control impossible

Causes can be general wear and tear over time, exposure to heat warping the plastic material, or accidental damage from rough use.

This OEM replacement part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore gas ranges.

The Burner Head is an OEM part for Whirlpool gas ranges. It sits on top of the burner base and distributes the gas evenly for efficient and controlled flame production. This burner head ensures heat distribution and flame stability during cooking. It is designed to withstand high temperatures and daily use. 

A bad burner head can occur due to clogs, corrosion, or damage to the burner ports. If you notice symptoms such as uneven or weak flames, poor burner ignition, or a yellow or orange flame instead of a steady blue flame, it may be time to replace this part.

Symptoms of a bad burner head include:

• Uneven or weak flames
• Poor burner ignition
• Yellow or orange flame

Restore your Whirlpool gas range by replacing the faulty or damaged burner head with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

The Grate Kit is an OEM part for Whirlpool ranges. It provides elevated cooking surfaces optimized for even heating of pots, pans and other cookware.

Causes for replacement include occasional warping or misshaping of wires that prevent stable cookware support. Surface scratches or residues lessening reflectivity also necessitate periodic replacement.

Symptoms involve:

• Wires distorting from original alignments and dimensions
• Cookware unstable due to points of contact or support
• Difficulty viewing contents of pans and pots
• Reduced reflectivity of ceramic cooktop surfaces

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This orifice controls natural gas flow to a burner for a precise 17.5K BTU output, restoring proper flame size and consistent heating. Use when a burner produces weak, uneven, or no flame. What it does:

• Meter gas to the burner for a 17.5K BTU natural gas flame
• Helps correct low or uneven burner flames and improves heat output
• Commonly replaced when a burner won't light, sputters, or shows an unstable/yellow flame
• Works as the fixed orifice that matches appliance gas pressure and burner design

• Shut off gas supply and disconnect power before servicing
• Replace only with the correct orifice size for safe operation
• Use proper fittings and thread sealant rated for gas; check all connections for leaks

This indicator light lamp assembly notifies you when a control or function is active and restores visible status feedback for your appliance. It's a small, direct-replacement lamp used on control panels and status indicators. What it does:

• Illuminates control-panel indicators so you can see operating status and selected settings.
• Replaces a dim, flickering, or non-working indicator light.
• Helps diagnose control and user-interface issues by restoring visible feedback.
• Fits into the panel socket and connects to the existing wiring harness.

• Disconnect power to the appliance before starting any repair to avoid shock.
• Access typically requires removing the control or trim panel; keep screws and fasteners organized.
• Handle the lamp and lens carefully to avoid damage; do not force-fit.