Kddrs807sss04 Parts

This replacement dryer tube channels heated air from the dryer cabinet to the lint filter/blower and exhaust path, restoring proper airflow and helping the cycle dry clothes efficiently. Use it when the original tube is cracked, crushed, or blocked. What it does

• Directs dryer airflow from the drum/blower chamber to the lint trap and exhaust.
• Helps maintain proper venting to prevent overheating and inefficient drying.
• Reduces air leaks that can cause longer dry times or hot spots.
• Minimizes lint buildup in the cabinet by providing a smooth, routed path for debris to the lint filter.

• One dryer tube

• Disconnect power (and gas supply if applicable) before servicing; ensure the dryer is completely powered off.
• Remove front or rear access panel as required to reach and replace the tube; keep fasteners for reassembly.
• Inspect adjacent seals and clamps; replace any damaged gaskets or worn clamps for a secure fit.
• Use gloves to avoid sharp sheet-metal edges and run a short test cycle to ensure proper airflow and quiet operation.

This dampener cushions and stabilizes the washer tub during spin cycles to reduce vibration and noise for smoother operation. It replaces worn or damaged suspension dampeners to help restore proper tub balance and quieter performance. What it does:

• Absorbs and dampens tub movement during agitation and spin to reduce vibration and noise.
• Helps maintain proper tub alignment for more even spinning and less wobble.
• Commonly replaced when the washer rocks, thumps, or makes excessive noise during spin.
• Works with the washer's suspension system to protect other components from shock and wear.

• 1 dampener

• Disconnect power and shut off water supply before beginning any repair.
• Access typically requires removing the washer cabinet or front panel; follow OEM service instructions.
• Inspect mounting studs and clips for wear; replace as needed to ensure a secure fit.

This is a fastener screw used to secure appliance panels and components where a 10-24 thread is required. It provides a reliable hold for reattaching parts during repairs and maintenance. What it does:

• Fastens panels, brackets, or components with a 10-24 threaded hole
• Restores original attachment points that have missing or damaged screws
• Helps reduce vibration and rattling when properly tightened
• Works with metal or reinforced plastic mating components designed for 10-24 hardware

• One screw (quantity: 1)

• Use the matching 10-24 driver/socket and turn until snug; avoid over-tightening
• Verify mating threads and alignment before driving to prevent cross-threading
• Disconnect power and follow appliance safety procedures before servicing
• Check for proper washer or spacer if originally present

This switch ignitor is the replacement ignition switch used on compatible gas ranges and ovens to control spark to the burner. It restores the unit's ability to ignite safely and reliably when the control calls for flame. What it does:

• Sends ignition spark to the burner when the oven/range control signals a light cycle
• Helps ensure consistent ignition and reduces failed light attempts
• Commonly used when burners click but do not ignite or ignition is intermittent
• Works as the electrical switching component in the appliance's ignition circuit

• Disconnect power and shut off the gas supply before beginning work
• Handle with care to avoid damage to terminals and connectors
• Follow the appliance schematic and service manual for correct wiring and mounting
• If you smell gas or suspect a leak, stop.

Self-locking, phillips screw.

This rail assembly is the sliding track that lets a refrigerator drawer open and close smoothly, restoring proper drawer movement and alignment. It replaces damaged or worn drawer rails to reduce sticking and uneven operation. What it does:

• Provides a guided track for a refrigerator drawer to slide in and out
• Restores smooth, even movement when drawers are sticking or wobbling
• Keeps the drawer aligned to prevent dragging or uneven gaps
• Helps maintain proper drawer sealing and fit by correcting alignment issues

• Disconnect power or unplug the appliance and remove stored items before service
• Remove the drawer per the manufacturer's instructions to access the rail
• Use basic hand tools; align the rail carefully and secure all fasteners tight but do not overtighten

This replacement ice cube pan holds and organizes ice in your refrigerator's freezer. Replacing a cracked or warped pan restores clean, contained ice storage and smoother access or dispensing, depending on your model's design. What it does:

• Collects and stores ice produced by the icemaker or manual trays
• Keeps cubes contained and easy to access; fits designated guides in the freezer
• Helps ensure proper ice access or dispensing on applicable models
• Typical symptoms: cracked bin, broken tabs, bin won't seat, ice spilling or clumping

• 1 ice cube pan/bin

• Disconnect power to the refrigerator and turn off the icemaker before starting
• Remove the old pan and empty any remaining ice
• If your model reuses a drive/crusher or other hardware, transfer those parts from the original pan as directed for your unit
• Seat the new pan fully in its tracks/coupler, restore power, and allow normal ice production

This motor capacitor helps the dryer motor start and keep running smoothly by providing the electrical boost the motor needs. Replacing a failing capacitor restores normal motor operation and reliable drying performance. What it does:

• Provides the start/run electrical boost required for the dryer motor to spin
• Helps prevent motor stalling, slow spin, or intermittent operation
• A failed capacitor can cause humming, no-start, or the drum not to turn
• Restoring the correct capacitor value protects the motor from stress and overheating

• Disconnect power to the appliance before service to avoid shock
• Discharge the capacitor safely before removing (use insulated tools and follow OEM guidance)
• Replace with the same part number/specification; secure terminals and mounting

This electronic control board manages the appliance's user interface and cycle functions so your unit runs the settings you select reliably. It restores responsive controls and correct cycle operation when the original control fails. What it does:

• Receives input from the control panel and starts/stops cycles accordingly
• Regulates timed and programmed functions for accurate operation
• Communicates with sensors and other modules to coordinate cycles
• Common symptoms: unresponsive buttons, incorrect cycles, erratic behavior, or no display/controls

• Disconnect power (unplug or shut off breaker) before attempting service
• Handle the board by edges and avoid static; ESD precautions recommended
• Verify your model number and part number match before installation