Kdfe104 Hbl0 Parts

This heater terminal nut fastens the heating element stud on the outside of the tub, keeping the element seated and stable during wash and dry cycles. Replace if the original nut is missing, stripped, or corroded.

• Secures the heating element terminals to the tub exterior
• Maintains proper element position for consistent, reliable operation
• Direct replacement for a worn, missing, or rusted element terminal nut
• Common signs: loose heating element at the tub wall, rattling from the lower area, or visible damage/corrosion on the nut

• Safety first: Disconnect power at the breaker and allow the element to cool before servicing.
• Access the heater terminals from beneath the unit by removing the toe panel or carefully sliding the dishwasher out.
• Support the terminal stud and wiring while loosening/tightening to avoid twisting or stressing the element.
• Tighten snugly without overtightening; run a brief test cycle to confirm proper operation.

The Vent Gasket is an OEM part for Whirlpool dishwashers. It is responsible for sealing the vent area of the dishwasher, preventing any leaks or air gaps that could compromise the efficiency of the appliance.

A bad vent gasket can be caused by wear and tear, exposure to high temperatures, or damage due to food debris or cleaning agents. If you notice water leakage or steam escaping from the vent area, it may indicate a problem with the vent gasket.

Symptoms of a bad vent gasket include:

• Water leakage or drips from the vent area
• Steam escaping from the vent during operation
• Moisture remaining on dishes after a cycle
• Increased noise levels coming from the vent area

Replace your faulty vent gasket with this genuine OEM part to restore your dishwasher. 

This Whirlpool part can also be used on Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore/Sears brand appliances.
 

The Cap is an OEM part for Whirlpool brand built-in dishwashers. Located on the outer tub, it protects electronic boards and seals the detergent dispenser opening. 

Causes of cap failure can include cracking or warping from prolonged exposure to heat and cleaning chemicals within the dishwasher environment.

Symptoms include: 

• Leaks or moisture ingress at the detergent dispenser entry point
• Error codes relating to electrical components beneath the cap  
• Loose or missing securing clips failing to maintain a watertight seal

This Whirlpool replacement restores critical protection of internal parts. For Whirlpool, KitchenAid, and some Kenmore models, it prevents costly repairs down the line. 

The Power Cord is an OEM part for Whirlpool dishwashers. This kit provides you with all the necessary parts to safely and effectively connect your dishwasher to the power source. The kit includes one power cord with a right angle head, one grommet, and one metal strain relief. The power cord with a right angle head allows for easy installation and helps to prevent excessive bending or damage to the cord.  

A bad power cord can occur due to wear and tear, exposure to heat or moisture, or accidental damage. If you notice symptoms such as intermittent power supply, sparks or electrical arcing, or a loose connection, it may be time to replace the power cord kit.

Symptoms of a bad power cord include:

• Intermittent power supply
• Sparks or electrical arcing
• Loose connection

Restore your Whirlpool dishwasher by replacing the faulty or damaged power cord kit with this genuine OEM part.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

The Power Cord is an OEM part for Whirlpool dishwashers. This kit provides you with all the necessary parts to safely and effectively connect your dishwasher to the power source. The kit includes one power cord with a right angle head, one grommet, and one metal strain relief. The power cord with a right angle head allows for easy installation and helps to prevent excessive bending or damage to the cord.  

A bad power cord can occur due to wear and tear, exposure to heat or moisture, or accidental damage. If you notice symptoms such as intermittent power supply, sparks or electrical arcing, or a loose connection, it may be time to replace the power cord kit.

Symptoms of a bad power cord include:

• Intermittent power supply
• Sparks or electrical arcing
• Loose connection

Restore your Whirlpool dishwasher by replacing the faulty or damaged power cord kit with this genuine OEM part.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This upper rack adjuster mounts on the right side of the dishwasher's rack system. It lets you raise or lower the rack and keeps it level so you can load taller items and maintain consistent spray coverage.

• Controls upper rack height and alignment on the right side
• Helps the rack glide evenly and stay locked at the selected height
• Replace if the rack won't adjust, sits uneven, drops, or the adjuster teeth/lever are cracked
• Noise, binding, or a loose rack on one side can indicate a failed adjuster

• Disconnect power and shut off water to the dishwasher
• Remove the upper rack (release end caps and slide the rack out)
• Swap the damaged adjuster for the new one; transfer any reusable clips or hardware from the original part as needed
• Reinstall the rack and verify smooth travel and height adjustment before restoring power and water

This is the replacement lid for select top-load washers. It restores a secure, properly aligned cover so the lid closes and the lock/strike can engage, allowing cycles—especially spin—to run safely while helping contain splashes.

• Covers the wash basket and helps contain water splashes during operation
• Provides proper alignment for the lid lock/strike to engage
• Replaces cracked, warped, or broken lids
• May help with: lid won't close/latch and cycles that won't start or won't spin because the lid isn't closing

• Unplug the washer before servicing
• Support the lid and remove hinge screws/pins carefully to prevent damage
• Transfer existing hinge hardware and the lid strike from the old lid if your model uses them
• After installation, close the lid to verify smooth closure and lock engagement before running a cycle

This support bracket helps hold internal components in place to restore proper alignment and reduce movement. It's a simple replacement that stabilizes the affected assembly and helps stop rattling or sagging. What it does:

• Secures and supports a loose or misaligned internal component or panel
• Prevents shifting that can cause vibration, noise, or uneven operation
• Restores proper alignment to reduce wear on adjoining parts
• Functions as the OEM replacement for the original support bracket

• One support bracket

• Inspect the mounting points and surrounding parts for wear before installing
• Replace only with the matching OEM part number to ensure fit; fasten securely per manufacturer torque recommendations
• Disconnect power and follow basic safety precautions before servicing the appliance

The Inner Door Vent is an OEM part for Whirlpool dishwashers. It plays an important role in moisture removal by allowing airflow out of the dishwasher during operation. Proper ventilation is important for the drying performance and prevention of mold growth.

Causes of a bad inner door vent can be cracks, breaks or deformities restricting airflow. This may occur due to normal use over years of use or accidental impact damage.

Symptoms of a bad inner door vent include:

• Dishes not drying fully
• White film residue left behind
• Mold or mildew growth inside machine
• Poor ventilation causing increased drying times

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Tub Insulation is an OEM part for Whirlpool dishwashers. It is installed behind the wash tub and functions to reduce noise, retain heat, and increase energy efficiency during cleaning cycles.

Causes of damaged insulation are normally longer-term deterioration from repeatedly high heat and moisture exposures during operation. Physical deterioration and loss of insulating properties occur over many years of use.

Symptoms of bad tub insulation include:

• Excessive noise emanating from the dishwasher interior
• Higher energy costs due to reduced insulation capabilities
• Slower cycle times as more power is needed to reach optimal temperatures

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Dishwasher Drip Tray is an OEM part for Whirlpool dishwashers. It collects excess water and rinse aid during the wash and rinse cycles, protecting internal components from exposure to liquids. As a critical part, the drip tray supports smooth drainage and prevents puddling inside the dishwasher.

Symptoms of a bad drip tray can include:

• Puddling or pooling of water inside the dishwasher tub
• Leaks onto the floor over time from the drainage area
• Water marks or corrosion of internal surfaces
• Improper drainage of water after cycles 

Causes of a bad drip tray may be cracks, leaks, or damage to the drainage channels over time. Failure could also result from mineral buildup blocking proper drainage.

This OEM Whirlpool part is also compatible with Maytag, Jenn-Air, Amana, some KitchenAid, and select Kenmore dishwasher models. 

Replacement screw used to secure appliance panels and components. Small but essential, it restores proper fit and helps prevent rattling, misalignment, or parts coming loose after repair or service. What it does:

• Secures panels, trim, brackets and small appliance components to restore correct alignment and fit.
• Replaces missing, stripped or damaged fasteners that allow parts to shift or vibrate.
• Helps stop rattling or loose parts that can occur during operation.
• Works as a direct hardware replacement where this exact screw is specified.

• Disconnect power (and gas if applicable) before servicing the appliance.
• Use the correct size screwdriver or driver bit to avoid cam-out or stripped heads.
• Install with firm, even pressure—do not over-tighten to avoid stripping threads or cracking plastic parts.
• Replace with the exact OEM screw when specified to ensure correct fit and function.

Replacement clip adjuster arm for the appliance adjuster mechanism. Secures and positions the adjuster assembly to restore proper alignment and help reduce rubbing, misalignment, and excessive noise caused by a broken or worn clip. What it does:

• Secures and holds the adjuster assembly in the correct position.
• Restores proper alignment to moving assemblies to prevent rubbing or binding.
• Can reduce unusual noises or vibration caused by a loose or broken clip.
• Commonly replaced when the clip is cracked, bent, missing, or no longer holds.

• Disconnect power (and gas if applicable) before beginning any repair.
• Basic hand tools may be required; panel or component removal could be necessary to access the clip.
• Handle sharp edges and inspect adjacent fasteners or mating clips; replace any damaged hardware.

Color: Black

This replacement screw secures appliance panels, brackets, and internal components so they stay tight and rattle-free. Use it to replace missing, stripped, or corroded hardware and restore a safe, secure assembly.

• Fastens panels, brackets, covers, or assemblies to the appliance cabinet/frame
• Helps prevent vibration, rattling, and loosening during operation
• Replaces hardware that is missing, worn, rusted, or stripped
• Common signs you need this screw: loose or misaligned parts, rattling noises, or a cover that won't stay on

• Disconnect power; shut off water or gas if applicable before servicing
• Match length and thread to the original and replace like-for-like locations
• Start threads by hand to avoid cross-threading; use the correct driver
• Tighten snugly without overtightening to prevent stripping plastic or sheet metal

This wire harness is a direct-replacement assembly that routes power and control signals between the appliance's electrical components, restoring proper electrical connections and component communication. What it does:

• Carries power and control signals between the control and functional components (motors, switches, sensors)
• Restores interrupted electrical connections that can cause components to not start or run intermittently
• Stops intermittent operation or failures caused by frayed, damaged, or corroded wiring
• Helps resolve related error codes or loss of specific functions when wiring is the confirmed cause

• Disconnect power to the appliance before performing any repair to avoid shock or damage
• Match connector shapes and wire routing to the original harness; do not force connectors
• Secure wires away from moving parts and heat sources; use retained clips/fasteners