Kdt207awh-O Parts

The Cap is an OEM part for Whirlpool brand built-in dishwashers. Located on the outer tub, it protects electronic boards and seals the detergent dispenser opening. 

Causes of cap failure can include cracking or warping from prolonged exposure to heat and cleaning chemicals within the dishwasher environment.

Symptoms include: 

• Leaks or moisture ingress at the detergent dispenser entry point
• Error codes relating to electrical components beneath the cap  
• Loose or missing securing clips failing to maintain a watertight seal

This Whirlpool replacement restores critical protection of internal parts. For Whirlpool, KitchenAid, and some Kenmore models, it prevents costly repairs down the line. 

The Power Cord is an OEM part for Whirlpool dishwashers. This kit provides you with all the necessary parts to safely and effectively connect your dishwasher to the power source. The kit includes one power cord with a right angle head, one grommet, and one metal strain relief. The power cord with a right angle head allows for easy installation and helps to prevent excessive bending or damage to the cord.  

A bad power cord can occur due to wear and tear, exposure to heat or moisture, or accidental damage. If you notice symptoms such as intermittent power supply, sparks or electrical arcing, or a loose connection, it may be time to replace the power cord kit.

Symptoms of a bad power cord include:

• Intermittent power supply
• Sparks or electrical arcing
• Loose connection

Restore your Whirlpool dishwasher by replacing the faulty or damaged power cord kit with this genuine OEM part.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

The Power Cord is an OEM part for Whirlpool dishwashers. This kit provides you with all the necessary parts to safely and effectively connect your dishwasher to the power source. The kit includes one power cord with a right angle head, one grommet, and one metal strain relief. The power cord with a right angle head allows for easy installation and helps to prevent excessive bending or damage to the cord.  

A bad power cord can occur due to wear and tear, exposure to heat or moisture, or accidental damage. If you notice symptoms such as intermittent power supply, sparks or electrical arcing, or a loose connection, it may be time to replace the power cord kit.

Symptoms of a bad power cord include:

• Intermittent power supply
• Sparks or electrical arcing
• Loose connection

Restore your Whirlpool dishwasher by replacing the faulty or damaged power cord kit with this genuine OEM part.

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This upper rack adjuster mounts on the right side of the dishwasher's rack system. It lets you raise or lower the rack and keeps it level so you can load taller items and maintain consistent spray coverage.

• Controls upper rack height and alignment on the right side
• Helps the rack glide evenly and stay locked at the selected height
• Replace if the rack won't adjust, sits uneven, drops, or the adjuster teeth/lever are cracked
• Noise, binding, or a loose rack on one side can indicate a failed adjuster

• Disconnect power and shut off water to the dishwasher
• Remove the upper rack (release end caps and slide the rack out)
• Swap the damaged adjuster for the new one; transfer any reusable clips or hardware from the original part as needed
• Reinstall the rack and verify smooth travel and height adjustment before restoring power and water

This is the replacement lid for select top-load washers. It restores a secure, properly aligned cover so the lid closes and the lock/strike can engage, allowing cycles—especially spin—to run safely while helping contain splashes.

• Covers the wash basket and helps contain water splashes during operation
• Provides proper alignment for the lid lock/strike to engage
• Replaces cracked, warped, or broken lids
• May help with: lid won't close/latch and cycles that won't start or won't spin because the lid isn't closing

• Unplug the washer before servicing
• Support the lid and remove hinge screws/pins carefully to prevent damage
• Transfer existing hinge hardware and the lid strike from the old lid if your model uses them
• After installation, close the lid to verify smooth closure and lock engagement before running a cycle

This support bracket helps hold internal components in place to restore proper alignment and reduce movement. It's a simple replacement that stabilizes the affected assembly and helps stop rattling or sagging. What it does:

• Secures and supports a loose or misaligned internal component or panel
• Prevents shifting that can cause vibration, noise, or uneven operation
• Restores proper alignment to reduce wear on adjoining parts
• Functions as the OEM replacement for the original support bracket

• One support bracket

• Inspect the mounting points and surrounding parts for wear before installing
• Replace only with the matching OEM part number to ensure fit; fasten securely per manufacturer torque recommendations
• Disconnect power and follow basic safety precautions before servicing the appliance

The Inner Door Vent is an OEM part for Whirlpool dishwashers. It plays an important role in moisture removal by allowing airflow out of the dishwasher during operation. Proper ventilation is important for the drying performance and prevention of mold growth.

Causes of a bad inner door vent can be cracks, breaks or deformities restricting airflow. This may occur due to normal use over years of use or accidental impact damage.

Symptoms of a bad inner door vent include:

• Dishes not drying fully
• White film residue left behind
• Mold or mildew growth inside machine
• Poor ventilation causing increased drying times

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Tub Insulation is an OEM part for Whirlpool dishwashers. It is installed behind the wash tub and functions to reduce noise, retain heat, and increase energy efficiency during cleaning cycles.

Causes of damaged insulation are normally longer-term deterioration from repeatedly high heat and moisture exposures during operation. Physical deterioration and loss of insulating properties occur over many years of use.

Symptoms of bad tub insulation include:

• Excessive noise emanating from the dishwasher interior
• Higher energy costs due to reduced insulation capabilities
• Slower cycle times as more power is needed to reach optimal temperatures

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

The Dishwasher Drip Tray is an OEM part for Whirlpool dishwashers. It collects excess water and rinse aid during the wash and rinse cycles, protecting internal components from exposure to liquids. As a critical part, the drip tray supports smooth drainage and prevents puddling inside the dishwasher.

Symptoms of a bad drip tray can include:

• Puddling or pooling of water inside the dishwasher tub
• Leaks onto the floor over time from the drainage area
• Water marks or corrosion of internal surfaces
• Improper drainage of water after cycles 

Causes of a bad drip tray may be cracks, leaks, or damage to the drainage channels over time. Failure could also result from mineral buildup blocking proper drainage.

This OEM Whirlpool part is also compatible with Maytag, Jenn-Air, Amana, some KitchenAid, and select Kenmore dishwasher models. 

Replacement screw used to secure appliance panels and components. Small but essential, it restores proper fit and helps prevent rattling, misalignment, or parts coming loose after repair or service. What it does:

• Secures panels, trim, brackets and small appliance components to restore correct alignment and fit.
• Replaces missing, stripped or damaged fasteners that allow parts to shift or vibrate.
• Helps stop rattling or loose parts that can occur during operation.
• Works as a direct hardware replacement where this exact screw is specified.

• Disconnect power (and gas if applicable) before servicing the appliance.
• Use the correct size screwdriver or driver bit to avoid cam-out or stripped heads.
• Install with firm, even pressure—do not over-tighten to avoid stripping threads or cracking plastic parts.
• Replace with the exact OEM screw when specified to ensure correct fit and function.

Replacement clip adjuster arm for the appliance adjuster mechanism. Secures and positions the adjuster assembly to restore proper alignment and help reduce rubbing, misalignment, and excessive noise caused by a broken or worn clip. What it does:

• Secures and holds the adjuster assembly in the correct position.
• Restores proper alignment to moving assemblies to prevent rubbing or binding.
• Can reduce unusual noises or vibration caused by a loose or broken clip.
• Commonly replaced when the clip is cracked, bent, missing, or no longer holds.

• Disconnect power (and gas if applicable) before beginning any repair.
• Basic hand tools may be required; panel or component removal could be necessary to access the clip.
• Handle sharp edges and inspect adjacent fasteners or mating clips; replace any damaged hardware.

The Control Board is an essential OEM part for Whirlpool dishwashers. It is responsible for controlling and coordinating the various functions and cycles of the appliance.

A bad control board can occur due to electrical issues, component failure, or damage. If you notice symptoms such as the dishwasher not starting, buttons not responding, or error codes displayed on the control panel, it may indicate a faulty control board.

Symptoms of a bad control board include:

• Dishwasher not starting or powering on
• Unresponsive buttons or controls
• Error codes displayed on the control panel

Restore your dishwasher by replacing the faulty control board with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

Includes: 2 mounting brackets, 2 clamps, 2 screws and hex key wrench.

The Dishwasher Installation Kit is an OEM part for Whirlpool dishwashers. It contains the brackets and hardware necessary to securely attach the dishwasher to your cabinetry. Proper mounting is important for the dishwasher to withstand vibration and movement during operation.

Causes for a bad mounting kit include worn or damaged original parts, improper previous installation, or the need to relocate the dishwasher.

Symptoms of a bad installation kit can include:

• Excessive noise, rattling, or shaking during the wash cycle
• The dishwasher becoming loose or detaching from cabinets
• Inability to properly level or adjust the height of the unit
• Stress on connecting hoses, tubing, or wiring

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement screw secures appliance panels, brackets, and internal components so they stay tight and rattle-free. Use it to replace missing, stripped, or corroded hardware and restore a safe, secure assembly.

• Fastens panels, brackets, covers, or assemblies to the appliance cabinet/frame
• Helps prevent vibration, rattling, and loosening during operation
• Replaces hardware that is missing, worn, rusted, or stripped
• Common signs you need this screw: loose or misaligned parts, rattling noises, or a cover that won't stay on

• Disconnect power; shut off water or gas if applicable before servicing
• Match length and thread to the original and replace like-for-like locations
• Start threads by hand to avoid cross-threading; use the correct driver
• Tighten snugly without overtightening to prevent stripping plastic or sheet metal

This replacement wire/harness pigtail delivers a reliable electrical connection between components to restore proper operation and safety. Use it to replace damaged or corroded wiring that causes intermittent power or component failure. What it does:

• Provides a single, pre-terminated wire/harness connection for appliance circuits
• Restores proper electrical continuity when original wire is frayed, burned, or broken
• Helps eliminate intermittent operation, shorts, or components that won't receive power
• Matches OEM fit and termination style for a direct replacement

• One replacement wire/harness pigtail

• Disconnect power to the appliance before attempting any repair
• Verify correct routing and secure connections to avoid pinching or chafing
• Use appropriate tools and, if needed, refer to the appliance wiring diagram

This control console assembly replaces a worn or damaged front console and restores the dryer's user controls and appearance. It provides the mounting surface for the control panel and direct access to buttons and knobs. What it does:

• Replaces a cracked, faded, or non-functional control console to restore user access to controls and indicators
• Secures the control panel and switches in the dryer's front housing
• Prevents dirt and moisture from reaching internal control components when properly installed
• Helps resolve issues where buttons are loose, the console is physically damaged, or the control area is cosmetically worn

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Remove screws and retainers securing the old console; handle clips gently to avoid breakage
• Align and seat the assembly fully before reinstalling hardware and reconnecting power