Kdte140dss0 Parts

Replacement screw used to secure appliance panels and components. Small but essential, it restores proper fit and helps prevent rattling, misalignment, or parts coming loose after repair or service. What it does:

• Secures panels, trim, brackets and small appliance components to restore correct alignment and fit.
• Replaces missing, stripped or damaged fasteners that allow parts to shift or vibrate.
• Helps stop rattling or loose parts that can occur during operation.
• Works as a direct hardware replacement where this exact screw is specified.

• Disconnect power (and gas if applicable) before servicing the appliance.
• Use the correct size screwdriver or driver bit to avoid cam-out or stripped heads.
• Install with firm, even pressure—do not over-tighten to avoid stripping threads or cracking plastic parts.
• Replace with the exact OEM screw when specified to ensure correct fit and function.

Replacement clip adjuster arm for the appliance adjuster mechanism. Secures and positions the adjuster assembly to restore proper alignment and help reduce rubbing, misalignment, and excessive noise caused by a broken or worn clip. What it does:

• Secures and holds the adjuster assembly in the correct position.
• Restores proper alignment to moving assemblies to prevent rubbing or binding.
• Can reduce unusual noises or vibration caused by a loose or broken clip.
• Commonly replaced when the clip is cracked, bent, missing, or no longer holds.

• Disconnect power (and gas if applicable) before beginning any repair.
• Basic hand tools may be required; panel or component removal could be necessary to access the clip.
• Handle sharp edges and inspect adjacent fasteners or mating clips; replace any damaged hardware.

The Control Board is an essential OEM part for Whirlpool dishwashers. It is responsible for controlling and coordinating the various functions and cycles of the appliance.

A bad control board can occur due to electrical issues, component failure, or damage. If you notice symptoms such as the dishwasher not starting, buttons not responding, or error codes displayed on the control panel, it may indicate a faulty control board.

Symptoms of a bad control board include:

• Dishwasher not starting or powering on
• Unresponsive buttons or controls
• Error codes displayed on the control panel

Restore your dishwasher by replacing the faulty control board with this genuine OEM part.

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.
 

Includes: 2 mounting brackets, 2 clamps, 2 screws and hex key wrench.

The Dishwasher Installation Kit is an OEM part for Whirlpool dishwashers. It contains the brackets and hardware necessary to securely attach the dishwasher to your cabinetry. Proper mounting is important for the dishwasher to withstand vibration and movement during operation.

Causes for a bad mounting kit include worn or damaged original parts, improper previous installation, or the need to relocate the dishwasher.

Symptoms of a bad installation kit can include:

• Excessive noise, rattling, or shaking during the wash cycle
• The dishwasher becoming loose or detaching from cabinets
• Inability to properly level or adjust the height of the unit
• Stress on connecting hoses, tubing, or wiring

This genuine OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This replacement screw secures appliance panels, brackets, and internal components so they stay tight and rattle-free. Use it to replace missing, stripped, or corroded hardware and restore a safe, secure assembly.

• Fastens panels, brackets, covers, or assemblies to the appliance cabinet/frame
• Helps prevent vibration, rattling, and loosening during operation
• Replaces hardware that is missing, worn, rusted, or stripped
• Common signs you need this screw: loose or misaligned parts, rattling noises, or a cover that won't stay on

• Disconnect power; shut off water or gas if applicable before servicing
• Match length and thread to the original and replace like-for-like locations
• Start threads by hand to avoid cross-threading; use the correct driver
• Tighten snugly without overtightening to prevent stripping plastic or sheet metal

This replacement wire/harness pigtail delivers a reliable electrical connection between components to restore proper operation and safety. Use it to replace damaged or corroded wiring that causes intermittent power or component failure. What it does:

• Provides a single, pre-terminated wire/harness connection for appliance circuits
• Restores proper electrical continuity when original wire is frayed, burned, or broken
• Helps eliminate intermittent operation, shorts, or components that won't receive power
• Matches OEM fit and termination style for a direct replacement

• One replacement wire/harness pigtail

• Disconnect power to the appliance before attempting any repair
• Verify correct routing and secure connections to avoid pinching or chafing
• Use appropriate tools and, if needed, refer to the appliance wiring diagram

This control console assembly replaces a worn or damaged front console and restores the dryer's user controls and appearance. It provides the mounting surface for the control panel and direct access to buttons and knobs. What it does:

• Replaces a cracked, faded, or non-functional control console to restore user access to controls and indicators
• Secures the control panel and switches in the dryer's front housing
• Prevents dirt and moisture from reaching internal control components when properly installed
• Helps resolve issues where buttons are loose, the console is physically damaged, or the control area is cosmetically worn

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Remove screws and retainers securing the old console; handle clips gently to avoid breakage
• Align and seat the assembly fully before reinstalling hardware and reconnecting power

This tube-feed is a replacement water feed tube that routes water to the appliance's dispensing or ice-making assembly, restoring proper water flow and helping stop leaks or interrupted fills. Use when the original tube is cracked, clogged, or missing. What it does:

• Directs water from the supply or inlet to the dispenser, ice maker, or internal valve assembly
• Restores proper water flow when the original tube is damaged, kinked, or leaking
• Helps prevent water leaks and intermittent filling caused by split or clogged tubing
• Works as a direct-fit replacement when the OEM part is required

• Replace with power and water supply shut off; turn off the water and unplug the appliance first
• Inspect fittings and clamps; use the correct connectors and tighten to prevent leaks
• Handle gently to avoid kinks; route the tube to match original path and clear of sharp edges

This thermostat bracket secures the refrigerator/freezer temperature sensor or thermostat to the cabinet, keeping the sensor in the correct position for accurate temperature control. Durable replacement for factory mounting hardware. What it does:

• Holds the thermostat/temperature sensor in place so it reads interior temperatures correctly
• Helps prevent loose or misaligned sensors that can cause irregular cooling or cycling
• Restores proper sensor positioning after damage or broken mounting clips
• Works with the thermostat assembly to maintain consistent appliance operation

• One thermostat mounting bracket

• Disconnect power to the appliance before service to avoid electrical shock
• Handle thermostat/sensor elements carefully; avoid bending or pinching the sensing tube
• Retain or reuse original fasteners unless replacement hardware is explicitly included

Color: Black

This positioner is a small mounting bracket that secures and aligns a moving or fitted component inside the appliance, helping restore correct positioning and reduce vibration or misalignment issues for reliable operation. What it does:

• Secures and aligns internal parts so they sit correctly in the cabinet or assembly
• Keeps panels, assemblies or mechanisms from shifting during use
• Reduces rattles, misalignment and friction-related wear on adjoining parts
• Helps restore proper fit and consistent operation when the original positioner is broken or worn

• One positioner

• Disconnect power (and water for applicable appliances) before beginning any service
• Follow the appliance's service manual for exact removal and installation steps
• Basic hand tools typically required; keep track of fasteners and orientation

This control panel is the console assembly that houses the appliance's user interface and controls, restoring button access and display feedback for normal operation. It replaces a damaged or unresponsive console so you can select cycles and options reliably. What it does:

• Provides the touch/button interface and display functions used to select cycles and settings
• Routes user commands to the appliance's control electronics so cycles start and respond
• Addresses symptoms like unresponsive buttons, blank or erratic display, or controls that won't accept inputs
• Acts as the physical mounting and connection point for the console's wiring harness

• Disconnect power to the appliance before starting any work to avoid shock or injury
• Installation typically requires removing the front console or top panel and unplugging the wiring harness
• Handle the panel and any display window carefully to avoid scratching or cracking

This is a replacement screw used to fasten panels, brackets, or small assemblies on Whirlpool appliances, restoring secure mounting and helping stop loose or rattling parts. It's a direct-fit fastener intended for repair or maintenance. What it does

• Secures panels, trim pieces, brackets, or components to the appliance frame
• Restores proper alignment and prevents vibration or rattling caused by missing or loose hardware
• Suitable as a like-for-like replacement for the original mounting screw
• Works wherever the OEM screw specification (size/head/thread) matches the original

• Always disconnect power (and water, if applicable) before beginning repairs.
• Hand-start fasteners to avoid cross-threading; tighten snugly but do not over-torque.
• Use the correct driver bit and wear eye protection when working around panels and springs.