Kdtm354dsso Parts

This spacer positions and supports the appliance tank/tub assembly to maintain proper alignment and spacing for reliable operation. Replaces a worn or damaged spacer to restore correct fit and reduce movement. What it does:

• Keeps the tank/tub assembly correctly spaced and aligned with the cabinet and mounting points
• Helps prevent rubbing, binding, and excess vibration caused by a missing or damaged spacer
• Restores proper clearance to support seals and hoses that rely on correct tank positioning
• Useful when reassembling the appliance after service or repair

• One spacer

• Disconnect power and water supply before starting any repair
• Access may require removal of outer panels, console, or access covers depending on model
• Handle parts carefully to avoid damaging surrounding seals and wiring; reuse fasteners unless replacement is specified

The Drain Hose is an OEM part for Whirlpool built-in dishwashers. As the tube removes wastewater after each cycle, it plays a key part in sanitizing dishes. 

Causes of a bad Drain Hose can include mineral deposits inside over many years reducing flow. Cracks may also form from constant flexing as it transport water to the garbage disposer or sink drain.

Symptoms of a bad drain hose include:

• Puddles or pooling inside the dishwasher 
• Incomplete drainage leaving residue on dishes
• Leaks around hose connections

This genuine Whirlpool replacement is compatible with brands like Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore too. 

This replacement silverware basket sits in the dishwasher rack and keeps forks, knives, and spoons upright and contained so they wash thoroughly and don't slip through the rack or interfere with spray-arm movement. What it does:

• Holds and organizes flatware during wash and rinse cycles
• Helps separate utensils for better spray coverage and drainage
• Replaces cracked, warped, or missing baskets

• 1 silverware basket

• Open the dishwasher and pull out the lower rack for access
• Lift out the old basket and place the new basket in the same location/orientation
• Ensure the basket seats securely and does not contact the lower spray arm
• Manually spin the spray arm to confirm clearance before running a cycle

The Door Hinge (RH) is an OEM replacement part for Whirlpool dishwashers. This hinge is installed on the right-hand side of the dishwasher door, allowing it to open and close smoothly while maintaining the proper tension and alignment. The hinge plays a crucial role in ensuring the door seals securely during operation, preventing leaks and enabling efficient cleaning performance.

Common causes include regular use leading to wear and tear, accidental impacts, or exposure to moisture, which can contribute to rust or corrosion.

Symptoms of a bad door hinge include:

• The dishwasher door not closing completely
• Difficulty opening or closing the door
• A sagging or misaligned door
• Unusual noises when moving the door

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Arm-Spray Assembly is an OEM component specifically designed for Whirlpool dishwashers. It is a multi-functional assembly that includes both the upper and lower arms as well as the water sprayer. This assembly works together to provide thorough and complete washing coverage during cycles through strategically placed sprays of water.

Symptoms of a bad arm-spray assembly can include:

• Incomplete or ineffective cleaning even on short cycles  
• Dirty dishes or food debris remaining after wash cycles
• Improper or uneven water distribution 
• Arms or nozzles becoming blocked or clogged

Causes are typically normal wear over time as the moving plastic and rubber components endure continuous rotating and spraying motions during each wash. 

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models. Replace with this genuine part to restore full washing capability.

This 9/32" ratcheting retainer secures mating components in place, providing a reliable spring-lock connection that resists loosening from vibration. Use it to restore proper fit where the original retainer has worn or broken. What it does:

• Holds shafts, rods, or assemblies securely in position using a ratcheting/spring clip action
• Prevents side-to-side movement and reduces rattling or misalignment
• Commonly replaced when the original clip is bent, cracked, or no longer grips tightly
• Works as a direct-fit replacement to restore intended component retention

• Basic hand tools may be required; handle the clip carefully to avoid pinching
• Wear eye protection—spring clips can release suddenly during removal/installation
• Ensure mating parts are aligned before seating the retainer for a secure fit
• If other fasteners or damaged parts are found, inspect and replace as needed

This tine row replaces a broken or missing set of tines on a dishwasher lower rack to help keep plates, bowls and cookware upright and secure during wash cycles. It restores proper dish spacing and prevents items from shifting. What it does

• Replaces a damaged or corroded tine row to hold dishes securely in the lower rack
• Helps prevent dishes from tipping, colliding, or blocking spray arms
• Restores consistent spacing so water and detergent can reach items evenly
• Commonly used when individual tines are bent, missing, or the wire coating has worn away

• One tine row (single replacement piece as shown)

• Removes and snaps into the lower rack; may require gently bending adjacent tines to align
• No electrical work required; remove the rack and work on a stable surface
• Use hand protection when handling sharp wire ends or cut coating
• If rack coating is extensively damaged, consider replacing the rack to prevent rust transfer

This thermostat bracket secures the refrigerator/freezer temperature sensor or thermostat to the cabinet, keeping the sensor in the correct position for accurate temperature control. Durable replacement for factory mounting hardware. What it does:

• Holds the thermostat/temperature sensor in place so it reads interior temperatures correctly
• Helps prevent loose or misaligned sensors that can cause irregular cooling or cycling
• Restores proper sensor positioning after damage or broken mounting clips
• Works with the thermostat assembly to maintain consistent appliance operation

• One thermostat mounting bracket

• Disconnect power to the appliance before service to avoid electrical shock
• Handle thermostat/sensor elements carefully; avoid bending or pinching the sensing tube
• Retain or reuse original fasteners unless replacement hardware is explicitly included

This support is a small mounting bracket that secures internal components and helps keep assemblies aligned so your appliance runs quietly and reliably. It replaces worn or broken supports to restore proper fit and stability. What it does:

• Secures internal parts or panels to prevent movement and misalignment
• Reduces vibration and rattling caused by loose or damaged supports
• Helps maintain correct alignment of assemblies for reliable operation
• Prevents further wear on adjacent parts by holding components in place

• Disconnect power (and water if applicable) before starting any repair
• Use common hand tools;
• Handle edges carefully—some components and mounting points may be sharp
• W10647236 matches the part on your appliance before installing

This pump cover replaces the damaged housing that seals and protects the washer's drain pump, helping restore proper water flow and contain leaks. It's a direct-fit service part designed for use with the original pump assembly. What it does:

• Forms the sealed housing around the drain pump and impeller to prevent water leaks.
• Helps direct drained water from the tub into the pump for proper drainage.
• Can resolve symptoms such as leaks under the washer, poor draining, or grinding/noise when the pump area is compromised.
• Replaces cracked or worn pump housings that allow water to escape or reduce pump efficiency.

• Disconnect power and water supply before servicing the washer to avoid shock or flooding.
• Basic hand tools required; some models may require removal of the front or rear access panel to reach the pump.
• Inspect surrounding seals, hoses, and clamps while replacing the cover; replace any damaged components to prevent repeat leaks.

This display lens is the clear plastic cover that protects and improves visibility of the appliance control panel. It restores a clean, readable look and shields the underlying display from scratches, spills, and wear. What it does:

• Protects the control board display window from damage and everyday wear
• Helps maintain clear visibility of LED/console indicators and touch areas
• Replaces cracked, cloudy, or scratched lenses that obscure controls
• Keeps moisture and debris away from the electronics behind the panel

• Disconnect power to the appliance before beginning any repair
• Console or trim panel removal is often required; handle clips and tabs carefully
• Use non-marring tools to avoid scratching the new lens during installation