Kenmore 25370343419 Parts

This replacement screw secures appliance panels, brackets, and internal components. It restores a tight, rattle-free fit and proper alignment when an original fastener is missing, stripped, or corroded.

• Fastens metal or plastic parts to the cabinet/frame
• Helps maintain alignment and reduce vibration or rattling
• Direct replacement for lost, damaged, or rusted hardware
• Keeps covers and brackets safely in place

• Disconnect power before servicing; for gas appliances, also shut off gas supply
• Match one-for-one with the original screw; verify length/type before installation
• Start threads by hand to avoid cross-threading; tighten snugly without overtightening
• Use the correct driver bit to prevent stripping the screw head

This refrigerator electronic module is the control component for a specific system in the appliance. When it fails, the related feature can become unresponsive or erratic; replacing the module restores proper, consistent operation. What it does:

• Provides control logic and power switching for the circuit it manages
• Interprets inputs from sensors/switches and sends commands to the related components
• Helps ensure correct timing and operation of the associated feature
• Common symptoms include unresponsive controls, intermittent operation, blank/frozen display, or a feature that will not run

• 1 electronic module

• Disconnect power to the appliance before servicing to avoid electrical shock
• Use ESD precautions; handle the board by the edges and avoid touching components
• Transfer connectors one at a time; verify each plug is fully seated and keyed correctly
• After installation, restore power and verify the controlled feature operates normally

This refrigerator water filter mount secures the filter head/housing to the liner so the cartridge seats squarely and seals. Replace a cracked or loose mount to restore a snug fit and help prevent leaks or vibration.

• Holds the water filter housing firmly in place
• Aligns the cartridge for proper engagement with the filter head
• Helps maintain a watertight seal at the filter connection
• Common symptoms: filter won't lock in or sits crooked, drips around the filter area, difficulty installing/removing the filter, or rattling from a loose housing

• Disconnect power and shut off the water supply; dispense water to relieve line pressure
• Remove the filter and any cover/trim to access the mount; retain existing screws for reuse
• Install the new mount and tighten screws gently to avoid cracking plastic
• Reinstall the filter, restore water and power, flush the dispenser, and check for leaks

This refrigerator door mullion is the flip-up divider attached to the fresh food door that covers the gap between doors. It helps the doors seal properly, limiting air leaks and moisture at the center seam for consistent cooling performance. What it does and common symptoms:

• Flips into place as the door closes to create the center seal between doors
• Helps maintain interior temperature and reduce condensation at the door seam
• Replace if cracked, warped, loose, or not springing/aligning with the door gasket
• Symptoms can include doors not latching cleanly, visible damage, or moisture along the middle

• One door mullion assembly

• Unplug the refrigerator before servicing
• Remove door bins if needed; support the mullion and remove the mounting screws
• Lift the mullion off its pivots, position the new part, and reuse existing hardware to secure it
• Verify smooth flip action and a tight seal before restoring power

This support beam is the structural rail that supports a refrigerator shelf and its pantry/drawer assembly. Replace a cracked or missing beam to restore level support, prevent sagging, and keep drawers operating smoothly.

• Spans the compartment to support the shelf/pantry frame and distribute weight
• Keeps the shelf level and stable under load
• Helps maintain proper alignment for attached drawers or bins
• Common symptoms: shelf tilts or sags; drawers bind, scrape, or drop
• Visible cracks, broken tabs, or a missing beam

• Disconnect power before servicing
• Remove food items, the shelf/frame, and any drawers or bins supported by the beam
• Release the beam from locking tabs or fasteners and remove the old part
• Seat the new beam fully in the mounting points, then reinstall the shelf and drawers and check for level

This hex head screw secures panels, brackets, and small components on appliances, restoring proper fit and stability. It's a direct replacement fastener when an original mounting screw is missing, loose, or damaged. What it does:

• Secures panels, brackets, trim, and internal components to prevent rattling or movement
• Replaces stripped, missing, or damaged mounting screws that cause loose parts or misalignment
• Restores reliable mechanical fastening so doors and panels sit flush and operate correctly
• Works as a general-purpose appliance mounting screw when original fasteners are worn

• Always disconnect power to the appliance before starting any repair
• Match the screw to the original location and thread engagement; start by hand to avoid cross-threading
• Use the correct driver or socket for the hex head and tighten until snug—do not overtighten
• If the original hole or threads are damaged, repair or replace the mating hardware before installing the screw

This cover shields the control knob housing, protecting internal switch components and giving the control panel a finished look. Replacing a damaged cover helps keep debris out and maintains proper knob alignment and appearance.

• Protects the control area from dust, moisture, and accidental contact
• Helps maintain smooth knob operation and alignment
• Common failure signs: cracked or missing cover, loose knob feel, exposed control components
• Restores a clean, finished look to the control panel

• Disconnect power before servicing
• Pull off the knob, then release any tabs or screws retaining the cover
• Note orientation before removal; seat the new cover fully
• Reinstall knob and test for proper fit and operation

This replacement drawer handle restores a secure, easy-to-grip pull for your appliance's lower drawer or storage compartment. It provides a direct fit and returns the proper look and function after a broken or worn handle. What it does

• Replaces a broken, cracked, or missing drawer pull so the drawer opens and closes normally
• Provides a stable grip to reduce slipping when pulling heavy or full drawers
• Restores the appliance's finished appearance at the drawer front
• Commonly used when the original handle shows visible damage or stress fractures

• One replacement drawer handle

• Basic hand tools (screwdriver or nut driver) may be needed; remove drawer or access panel per your model instructions
• Keep fasteners from the original handle; use only the screws/bolts specified for your model
• Disconnect power (if applicable) and follow the appliance manufacturer's safety guidelines before servicing

This slide assembly is the drawer glide that lets a refrigerator/freezer drawer open and close smoothly, restoring proper support and alignment for effortless access and secure operation. What it does

• Replaces a worn or broken drawer glide to restore smooth sliding action and prevent drawers from binding or falling.
• Supports the drawer track so the drawer stays aligned and inserts fully without catching.
• Reduces noise and grinding when opening or closing a drawer.
• Common symptoms: drawer sticks, drops, tilts, or feels loose when pulled.

• Unplug the appliance or disconnect power before servicing the drawer area.
• Empty the drawer and remove any front panel or stops as needed to access the slides.
• Inspect mounting points for damage; align the slide and secure fasteners snugly without over-tightening.
• Test the drawer travel after installation and re-secure any trim or stops.

This genuine replacement screw restores a secure hold for panels, trim, or internal components. It replaces worn or missing fasteners so parts stay aligned and appliances operate safely. What it does:

• Fastens panels, brackets, or trim into place
• Replaces stripped, missing, or damaged screws
• Helps stop rattling, loose panels, or misaligned trim
• Fits OEM mounting locations that require the specified machine screw

• Use the correct driver to avoid stripping the head
• Hand-start the screw, then tighten to firm snug; do not over-torque
• Disconnect power to the appliance before accessing internal components
• If other fasteners are damaged, inspect and replace as needed

This Mullion harness routes electrical connections through the refrigerator door mullion so lights, sensors and control/LED assemblies communicate with the main cabinet wiring. It restores reliable power and signal routing in the door center strip. What it does:

• Carries power and signal between the door/mullion components and the main harness
• Restores non-functioning mullion lights, LEDs or control communication caused by a damaged harness
• Prevents intermittent connections from frayed or broken mullion wiring
• Used when visible wire damage or connector failure is found in the mullion area

• One (1) mullion harness as pictured

• Disconnect power to the appliance before starting work to avoid shock or injury
• Remove the mullion/door trim and any gaskets per service instructions to access the harness
• Inspect connectors and wire routing; replace any clips or retainers to prevent pinching

This dispenser wiring harness connects the dispenser controls and components in the refrigerator door, restoring electrical continuity for the dispenser functions and simplifying replacement of a damaged or faulty harness. What it does:

• Carries power and signals between the dispenser switches, valve/solenoid, and indicator lights
• Replaces frayed, pinched, or damaged wiring that can cause intermittent or no dispenser operation
• Addresses symptoms like non-working water/ice dispenser, no dispenser lights, or unresponsive dispenser switches
• Provides factory-style connectors for a direct, plug-and-play replacement

• One dispenser wiring harness

• Disconnect power to the appliance before beginning any work to avoid shock
• Remove the inner door panel or dispenser bezel per your model's service instructions to access the harness
• Match connectors and routing to the original harness; avoid stretching or pinching wires when reinstalling
• Test dispenser functions after installation and reassemble panels securely

This retainer is a small mounting clip that secures interior components so they stay in place and operate reliably. It prevents parts from shifting or rattling during normal use and restores proper alignment. What it does:

• Holds trim, shelves or small appliance components securely to the cabinet or frame
• Prevents rattling, movement, or dislodging of the secured part
• Helps maintain correct alignment for smooth operation
• Common symptom: loose or wobbling trim, shelf, or component that won't stay seated

• Retainer mounting clip

• Disconnect power to the appliance before servicing to avoid shock or injury
• Use appropriate hand tools; this part typically snaps or slides into place but may require a screwdriver or nut driver
• Inspect mating surfaces and surrounding fasteners; replace any damaged clips or broken mounting features

This slide assembly restores smooth support and guided travel for a freezer or range storage drawer, helping the drawer open and close evenly and preventing sagging or binding. Fits the factory mounting locations and replaces a worn or damaged slide. What it does

• Guides and supports the storage/drawer so it opens and closes smoothly
• Prevents drawer sagging, sticking, or uneven movement
• Restores proper alignment and load support for safe operation
• Reduces noise from worn or bent slide components

• Disconnect power (for ranges) or remove food and drawers before servicing (for refrigerators) to avoid injury
• Remove the drawer to access mounting screws; typically requires basic hand tools
• Inspect mating brackets and fasteners; replace any damaged hardware for a secure fit
• Do not force parts; confirm correct orientation and engagement before reassembly

This shelf channel is the metal/plastic support that secures and aligns a refrigerator shelf or door bin, helping keep stored items stable and properly positioned. It restores proper shelf fit and prevents sagging or misalignment. What it does:

• Provides a secure mounting track for a refrigerator shelf or door bin
• Supports shelf weight to prevent bowing, shifting, or falling
• Keeps the shelf aligned so items sit level and doors close smoothly
• Helps restore original shelf fit after damage or wear

• One shelf channel mounting piece

• High-level replacement; inspect adjacent clips and fasteners and replace if damaged
• Use proper hand tools; avoid overtightening to prevent cracking
• Disconnect power only if working near electrical components; otherwise power removal is not typically required