Kenmore 665 1696581 Parts

This access panel provides a fitted cover that protects internal components while allowing service access when removed. It restores the appliance's exterior appearance and keeps wiring and parts safely enclosed. What it does:

• Covers and protects controls, wiring, and service areas from dust and accidental contact
• Provides removable access for diagnostics and repairs without damaging surrounding trim
• Helps maintain proper airflow and finish around the service area
• Reduces visible gaps and improves the appliance's exterior look

• Disconnect power to the appliance before removing or installing the panel
• Use the original screws or mounting hardware to secure the panel; do not force or bend metal
• Handle edges carefully to avoid cuts; wear gloves if needed

This replacement wire restores an electrical connection between components to help re-establish reliable power and operation. It's a simple, direct replacement when a damaged or broken wire causes loss of function. What it does:

• Provides a proper electrical path for a specific circuit or component
• Replaces frayed, cut, or burned wiring that can cause intermittent or failed operation
• Helps prevent arcing or poor contacts when the original wire is compromised
• Used where the OEM harness or wiring needs a single-wire replacement

• One replacement wire

• Turn off power to the appliance at the breaker or unplug before servicing
• Inspect surrounding wiring and connectors; replace damaged harnesses or connectors as needed
• Use proper connectors and secure routing to avoid pinching or abrasion

This is an electrical wire-harness connector used to join wiring in the appliance. It restores a secure electrical connection so controls and components receive proper power and signaling. What it does:

• Provides a secure mating point between wiring harnesses or between a harness and a component
• Maintains proper electrical contact to prevent intermittent power or signal loss
• Commonly used where a detachable electrical connection is needed for service or assembly
• Can help address symptoms like intermittent operation, components not powering on, or visible damaged/loose plug ends

• Disconnect power to the appliance before inspecting or replacing any electrical connector
• Verify connector orientation and full engagement; bent terminals may need replacement
• Compare the replacement to the original to ensure terminal count, shape and locking feature match
• If wiring insulation or terminals are damaged, replace the harness

This UI housing is the outer shell that supports and protects the appliance control panel, keeping the buttons and display securely mounted and shielded from moisture and debris. It restores a clean, stable control area. What it does:

• Provides a mounting surface and protective cover for the user interface and control electronics
• Prevents exposure of wiring and switches to spills, dust, and physical damage
• Restores proper alignment for buttons and knobs when the console is cracked or warped
• Helps eliminate loose or rattling controls caused by a damaged housing

• One UI/control panel housing

• Disconnect power (unplug or shut off breaker) before beginning any repair
• Remove screws and fasteners from the console; keep hardware for reuse if not replacing
• Handle the control board and ribbon cables carefully to avoid damage; disconnect connectors gently

This cap is a small protective cover designed to secure and seal a component opening on your appliance, keeping contaminants out and helping the assembly operate as intended. It's a simple replaceable part that restores proper fit and protection. What it does:

• Covers and seals a component opening to block dirt, lint, and moisture.
• Helps maintain proper alignment and retention of the underlying fitting or assembly.
• Common symptom: cracked, broken or missing caps can allow debris in or cause rattling.
• Common symptom: a worn or loose cap may fail to seat, reducing protection of the component.

• One cap as pictured

• Disconnect power and water before starting any work.
• Inspect the mating surface for damage or debris; clean before installing the new cap.
• Press or snap the cap into place until fully seated; do not force or pry.
• If the original cap was secured with clips or screws, retain or reuse them as required.

This thermostat bracket secures the refrigerator/freezer temperature sensor or thermostat to the cabinet, keeping the sensor in the correct position for accurate temperature control. Durable replacement for factory mounting hardware. What it does:

• Holds the thermostat/temperature sensor in place so it reads interior temperatures correctly
• Helps prevent loose or misaligned sensors that can cause irregular cooling or cycling
• Restores proper sensor positioning after damage or broken mounting clips
• Works with the thermostat assembly to maintain consistent appliance operation

• One thermostat mounting bracket

• Disconnect power to the appliance before service to avoid electrical shock
• Handle thermostat/sensor elements carefully; avoid bending or pinching the sensing tube
• Retain or reuse original fasteners unless replacement hardware is explicitly included

This center basket lid secures the top of the washer basket and helps keep laundry contained during the wash and spin cycles. It replaces a cracked or missing lid to restore proper operation and reduce fabric snags. What it does:

• Covers the center of the tub/basket to keep clothes from catching on the agitator or basket edge
• Helps maintain balanced load containment during agitation and spinning
• Prevents small items from falling into the basket gap or drain area
• Restores the washer's intended interior protection and appearance

• One center basket lid

• Disconnect power and water supply before starting any repair
• Remove the dispenser/console or top panel only if required by your model; follow factory service instructions
• Handle replacement parts carefully to avoid scratching the tub or lid finish

This seat support bracket is a genuine MTD part sold individually. This seat support bracket can be used as a replacement part in a lawnmower. The purpose of the seat support bracket in a lawnmower is to manage and bolster the stable placement of the seat such that the seat can raise, lower, and pivot to the desired height and comfort of the operator of the appliance for regular use.If the seat support bracket is punctured, dented, cracked, warped, eroded, or otherwise damaged, it should be removed and replaced by this genuine OEM replacement part.This is a genuine OEM replacement directly from the manufacturer. It is sold individually. This seat support bracket is compatible with the following outdoor appliance brands: MTD, Ryobi, Yard Machines, Bolens, Yard-Man, Troy-Bilt, and Husky.

This shift knob is a genuine MTD part, sold individually. A shift knob can be used as a replacement part in a lawn mower or a tiller. This genuine OEM part is made out of high quality, durable metal material that is built to last for the typical lifespan of the appliance.The shift knob in a lawn mower or a tiller might need to be replaced if it ceases to perform its central function for the appliance. This could occur if the shift knob has suffered damage from general wear and tear over long-term usage or as the result of a direct impact collision with a hard object, such as a rock or a curb.This component is a genuine OEM replacement part sourced directly from the manufacturer. It is sold individually. This shift knob is compatible with the following outdoor appliance brands: MTD, Craftsman, Toro, Cub Cadet, Troy-Bilt, Yard Machines, Huskee, Bolens, Yard Man, and MasterCut.