Kenmore 66512783K310 Parts

The Diverter Motor is an OEM part for Whirlpool dishwashers controls the diverter valve, which directs water flow to various spray arms throughout the dishwasher during a wash cycle. By accurately adjusting the flow of water, the diverter motor ensures that dishes are thoroughly cleaned and rinsed by optimizing coverage and water intensity according to the cycle selected.

Causes of a bad Diverter Motor can include electrical failures, mechanical wear over time, or damage from water infiltration.  

Symptoms of a bad Diverter Motor include:

• Dishes not being cleaned properly due to insufficient water reaching all areas.
• Unusual noises coming from the dishwasher, which may indicate a struggling or stuck diverter motor.
• Error codes displayed on the dishwasher that are related to water distribution functions.
• Leakage from the dishwasher base 

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This Barrier protects and separates appliance components, keeping wiring and parts properly aligned for reliable operation. It's a simple, durable replacement that restores the original spacing and support inside the appliance. What it does:

• Provides a stable mounting/separation surface to prevent rubbing or contact between parts
• Helps maintain correct component alignment to reduce vibration and noise
• Prevents wiring or small parts from contacting hot or moving components
• Common symptom: visible cracks, breaks, or shifted parts where components no longer sit securely

• One barrier as shown

• Disconnect power to the appliance before servicing to avoid electrical shock
• Remove any panels or covers that block access; keep track of fasteners
• This part typically installs with screws or snap-fit tabs—do not force components

This jumper wire connects control board circuits at the range/oven control panel to restore proper panel signaling. It's a simple replacement that helps resolve intermittent or missing control responses caused by a broken or damaged jumper. What it does:

• Bridges specific control panel terminals to complete circuit paths between the user interface and main control
• Restores continuity when an existing jumper is cracked, corroded, or broken
• Helps eliminate intermittent touch/control pad failures or non-responsive buttons linked to a faulty jumper
• Small, direct-use part for electronic control troubleshooting

• One jumper wire as shown

• Disconnect power to the appliance before servicing to avoid shock or damage
• Access may require removing the control panel or console—follow OEM service instructions
• Handle wiring and connectors carefully to avoid bending pins or damaging the control board

This plate-latch strike secures the appliance door by engaging the latch assembly so the door stays closed during operation. It replaces a worn or damaged strike to restore proper door closure and reliable operation. What it does:

• Provides a sturdy contact point for the door latch to engage and hold the door closed
• Helps prevent the door from popping open during use, which can cause cycle interruption
• Addresses symptoms like a door that won't stay latched, won't close fully, or causes the unit to stop mid-cycle
• Works as the mating strike for the existing latch assembly to ensure proper alignment

• One plate-latch strike

• Disconnect power to the appliance before beginning any repair
• Access the strike by opening the door; remove any trim or screws as needed to reach the strike mounting location
• Install replacement in the same orientation as the original and tighten fasteners securely without over-torquing
• After installation, verify the door latches smoothly and the appliance completes its normal cycle

Color: White. Size: 1 qt. can. Acrylic appliance paint.

The Thermostat Housing is an OEM part for Whirlpool dishwashers. It encases the thermostat responsible for accurately monitoring water temperatures throughout cleaning cycles. 

Symptoms of a faulty housing include:

• Inconsistent or improper water heating  
• Delayed or incomplete cycles from temperature control issues
• Error codes or failure detection by the control board

Causes may involve cracks allowing steam penetration, loose mounting points compromising seals, or damaged seals leaking interior thermostat components. 

This OEM replacement fits Whirlpool, KitchenAid, Jenn-Air, and some Kenmore models as well.

This water distribution manifold with spray spinner routes wash water to the dishwasher spray arms for consistent cleaning and coverage. Replaces a damaged or clogged manifold to restore normal spray action and wash performance. What it does:

• Directs pressurized wash water to the spray arms via an integrated spinner for even water distribution
• Helps maintain proper spray arm rotation and spray patterns for effective cleaning
• Can address symptoms like weak or uneven spray, poor cleaning results, or visible leaks at the manifold
• Works as the plumbing interface between the pump and the lower/upper spray assembly

• One water manifold with integrated spray spinner assembly

• Disconnect power and shut off water supply before beginning repair
• Handle plastic ports and clips carefully to avoid cracking; replace any worn gaskets or O-rings
• Inspect and clean connected hoses and spray arms while manifold is accessible

This center basket lid secures the top of the washer basket and helps keep laundry contained during the wash and spin cycles. It replaces a cracked or missing lid to restore proper operation and reduce fabric snags. What it does:

• Covers the center of the tub/basket to keep clothes from catching on the agitator or basket edge
• Helps maintain balanced load containment during agitation and spinning
• Prevents small items from falling into the basket gap or drain area
• Restores the washer's intended interior protection and appearance

• One center basket lid

• Disconnect power and water supply before starting any repair
• Remove the dispenser/console or top panel only if required by your model; follow factory service instructions
• Handle replacement parts carefully to avoid scratching the tub or lid finish

This name plate is the factory replacement label used to restore the appliance's exterior identification and appearance. It replaces worn, damaged, or faded name plates so the unit looks finished and readable. What it does:

• Restores the appliance's original identification and exterior appearance
• Replaces faded, scratched, or damaged labeling that obscures model/branding information
• Helps maintain a finished, factory look after repairs or panel replacement
• Serves as the visible label customers expect on the appliance exterior

• One name plate

• Disconnect power to the appliance before starting any work
• Remove any trim or fasteners that cover the existing name plate per the manufacturer's instructions
• Reuse existing screws or mounting hardware when possible; align carefully before securing
• Handle edges carefully to avoid cuts, and avoid touching adhesive surfaces to ensure a secure fit

Color: White