Kenmore 66513223N414 Parts

This control panel housing replaces the outer shell that holds the user interface and buttons, restoring a clean, stable mounting surface for the console and controls. It helps protect internal electronics and improves appearance. What it does:

• Replaces damaged, cracked, or warped control panel housing so buttons and display mount correctly
• Protects the user interface area from spills, debris, and physical damage
• Restores proper alignment for control buttons and switches to improve tactile response
• Helps prevent moisture or contaminants from reaching internal electronic components

• High-level replacement only: follow OEM disassembly steps; control board and buttons are shown separately and may need to be transferred
• Disconnect power before starting and take care to avoid damaging the display and wiring harness
• Use proper fasteners and gaskets if removed; do not force-fit parts or overtighten screws

This spacer positions and supports the appliance tank/tub assembly to maintain proper alignment and spacing for reliable operation. Replaces a worn or damaged spacer to restore correct fit and reduce movement. What it does:

• Keeps the tank/tub assembly correctly spaced and aligned with the cabinet and mounting points
• Helps prevent rubbing, binding, and excess vibration caused by a missing or damaged spacer
• Restores proper clearance to support seals and hoses that rely on correct tank positioning
• Useful when reassembling the appliance after service or repair

• One spacer

• Disconnect power and water supply before starting any repair
• Access may require removal of outer panels, console, or access covers depending on model
• Handle parts carefully to avoid damaging surrounding seals and wiring; reuse fasteners unless replacement is specified

This control bracket secures the console or control housing to the appliance, keeping the control panel stable and properly aligned for reliable operation. Replaces a damaged or missing bracket to restore secure mounting and prevent panel movement. What it does:

• Mounts the control console to the appliance frame to prevent wobbling or sagging
• Keeps control buttons and switches aligned for consistent user operation
• Helps stop rattling or vibration noise caused by a loose control housing
• Supports wiring and components behind the console to reduce strain on connectors

• Always unplug the appliance or disconnect power before beginning service
• Remove the console or access panel per service instructions to reach mounting points
• Use appropriate screwdrivers or nut drivers; keep original hardware unless damaged
• Align bracket and tighten screws evenly; avoid overtightening to prevent stripping

The Door Hinge (RH) is an OEM replacement part for Whirlpool dishwashers. This hinge is installed on the right-hand side of the dishwasher door, allowing it to open and close smoothly while maintaining the proper tension and alignment. The hinge plays a crucial role in ensuring the door seals securely during operation, preventing leaks and enabling efficient cleaning performance.

Common causes include regular use leading to wear and tear, accidental impacts, or exposure to moisture, which can contribute to rust or corrosion.

Symptoms of a bad door hinge include:

• The dishwasher door not closing completely
• Difficulty opening or closing the door
• A sagging or misaligned door
• Unusual noises when moving the door

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

This handle pocket is the small insert that finishes the end of select appliance door handles and retains the KM 2.5-inch medallion. Replace a cracked or missing pocket to restore a secure hold and a clean, factory look.

• Retains the KM 2.5-in medallion at the handle end
• Provides a finished appearance and helps cover internal fasteners
• Helps keep the handle end secure to reduce looseness or rattles
• Typical symptoms: loose or missing medallion, cracked pocket, damaged/unfinished handle end

• Disconnect power to the appliance before servicing
• Access the handle end; remove any set screw(s) or trim as required
• Seat the new pocket, transfer the existing medallion, and resecure hardware
• Do not overtighten fasteners; verify the handle is secure and aligned

This replacement panel is the user-facing cover piece for your appliance. It refreshes the appearance and provides a secure mounting surface so adjacent controls and trim align properly and stay firmly in place during use.

• Provides the exterior face/trim for the unit
• Supports and helps align nearby controls, display, or handle components
• Helps protect internal parts from minor impacts and debris
• Common symptoms: cracks, scratches, discoloration, broken mounting tabs, loose or rattling panel

• Disconnect power before servicing; also shut off gas/water if applicable
• Note screw locations and lengths during removal to ensure proper reassembly
• Transfer any nameplates, brackets, or overlays from the old panel as required
• Tighten fasteners snugly without overtightening to avoid cracking the new panel

This support bracket helps hold internal components in place to restore proper alignment and reduce movement. It's a simple replacement that stabilizes the affected assembly and helps stop rattling or sagging. What it does:

• Secures and supports a loose or misaligned internal component or panel
• Prevents shifting that can cause vibration, noise, or uneven operation
• Restores proper alignment to reduce wear on adjoining parts
• Functions as the OEM replacement for the original support bracket

• One support bracket

• Inspect the mounting points and surrounding parts for wear before installing
• Replace only with the matching OEM part number to ensure fit; fasten securely per manufacturer torque recommendations
• Disconnect power and follow basic safety precautions before servicing the appliance

This is an electrical wire-harness connector used to join wiring in the appliance. It restores a secure electrical connection so controls and components receive proper power and signaling. What it does:

• Provides a secure mating point between wiring harnesses or between a harness and a component
• Maintains proper electrical contact to prevent intermittent power or signal loss
• Commonly used where a detachable electrical connection is needed for service or assembly
• Can help address symptoms like intermittent operation, components not powering on, or visible damaged/loose plug ends

• Disconnect power to the appliance before inspecting or replacing any electrical connector
• Verify connector orientation and full engagement; bent terminals may need replacement
• Compare the replacement to the original to ensure terminal count, shape and locking feature match
• If wiring insulation or terminals are damaged, replace the harness

This thermostat bracket secures the refrigerator/freezer temperature sensor or thermostat to the cabinet, keeping the sensor in the correct position for accurate temperature control. Durable replacement for factory mounting hardware. What it does:

• Holds the thermostat/temperature sensor in place so it reads interior temperatures correctly
• Helps prevent loose or misaligned sensors that can cause irregular cooling or cycling
• Restores proper sensor positioning after damage or broken mounting clips
• Works with the thermostat assembly to maintain consistent appliance operation

• One thermostat mounting bracket

• Disconnect power to the appliance before service to avoid electrical shock
• Handle thermostat/sensor elements carefully; avoid bending or pinching the sensing tube
• Retain or reuse original fasteners unless replacement hardware is explicitly included

This wire harness routes power and control signals between appliance components to restore reliable electrical connections and component operation. It replaces a damaged, pinched, or corroded harness to help stop intermittent power or control failures. What it does:

• Provides finished connectorized wiring to join controls, sensors, and motors safely
• Restores lost or intermittent electrical connections caused by frayed or damaged wires
• Eliminates symptoms like components not powering, intermittent operation, or control errors
• Maintains proper wire routing and strain relief to prevent future chafing or shorts

• Disconnect all power before starting any repair to avoid shock or damage
• Take photos of existing wiring before removal to ensure correct reassembly
• Route the harness following existing clips and tie points; avoid pinching or sharp edges
• If connectors appear damaged, replace harness—do not splice unless explicitly required by OEM instructions

The Lower Door Seal is an OEM replacement part for Whirlpool dishwashers. This seal runs along the bottom edge of the dishwasher door, creating a tight seal against the tub when closed to contain water inside during cycles.  This seal measures approximately 22 inches in length

Causes of lower door seal failure commonly involve repeated compression stresses from opening/closing actions gradually stiffening the flexible gasket material. Drying out and cracking occurs over years of heat exposure as well.

Symptoms of a worn lower door seal include:

• Water leaking out from beneath dishwasher door during cycles
• Difficulty latching door completely from warped seal edges  
• Visible cracks, splits or brittleness along the length of the seal
• Gaps allowing water intrusion beneath door perimeter

This versatile OEM part is also compatible with select Maytag, KitchenAid, Jenn-Air, Amana, and some Kenmore dishwasher models.

The Diverter Motor is an OEM part for Whirlpool dishwashers controls the diverter valve, which directs water flow to various spray arms throughout the dishwasher during a wash cycle. By accurately adjusting the flow of water, the diverter motor ensures that dishes are thoroughly cleaned and rinsed by optimizing coverage and water intensity according to the cycle selected.

Causes of a bad Diverter Motor can include electrical failures, mechanical wear over time, or damage from water infiltration.  

Symptoms of a bad Diverter Motor include:

• Dishes not being cleaned properly due to insufficient water reaching all areas.
• Unusual noises coming from the dishwasher, which may indicate a struggling or stuck diverter motor.
• Error codes displayed on the dishwasher that are related to water distribution functions.
• Leakage from the dishwasher base 

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This replacement handle restores a secure, comfortable grip so you can open and close your appliance smoothly. It replaces a cracked, broken, or loose handle to bring back reliable operation and a clean, factory look.

• Provides sturdy leverage to open and close the unit's door or drawer
• Attaches to existing mounting posts or screws on compatible models
• Helps resolve issues like a loose, wobbly, cracked, or missing handle
• Restores appearance when the original handle is scuffed or damaged

• Disconnect power before servicing; also shut off water
• Protect the surface with tape or a cloth to avoid scratches during removal/installation
• Align the handle carefully; start fasteners by hand to prevent cross-threading
• Tighten evenly and only until snug to avoid damage to threads or trim

This box cover protects and conceals the appliance's electrical junction box, keeping wiring secure and reducing exposure to dirt and moisture. It restores a finished appearance and helps maintain safe electrical connections. What it does

• Shields the junction box and wiring from dust and debris
• Helps prevent accidental contact with live terminals
• Maintains the appliance's original fit and finish around electrical components
• Commonly replaced when the cover is cracked, missing, or damaged

• One box cover

• Disconnect power to the appliance before installing to avoid electrical shock
• Handle carefully to avoid damaging tabs or screw bosses used for mounting
• Use the OEM screws or fasteners; replace missing hardware with manufacturer-recommended parts

Color: White. Size: 1 qt. can. Acrylic appliance paint.