Kenmore 66513499N411 Parts

This inner door panel replaces the damaged or worn interior panel on the appliance door to restore appearance and support proper sealing and operation. It helps stop drafts, heat or moisture loss, and prevents debris from entering the door cavity. What it does:

• Replaces a cracked, dented, or warped inner door panel that affects door fit and appearance
• Restores the inner surface that supports insulation and inner door components
• Helps reduce heat, steam, or moisture transfer through the door
• Can stop rattling or gaps caused by a loose or damaged inner panel

• One inner door panel as shown

• High-level replacement: remove the outer door panel and any trim to access and swap the inner panel
• Handle edges and fasteners carefully to avoid scratching the door finish
• Unplug the appliance or disconnect power before beginning work to prevent electrical hazards

The Diverter Motor is an OEM part for Whirlpool dishwashers controls the diverter valve, which directs water flow to various spray arms throughout the dishwasher during a wash cycle. By accurately adjusting the flow of water, the diverter motor ensures that dishes are thoroughly cleaned and rinsed by optimizing coverage and water intensity according to the cycle selected.

Causes of a bad Diverter Motor can include electrical failures, mechanical wear over time, or damage from water infiltration.  

Symptoms of a bad Diverter Motor include:

• Dishes not being cleaned properly due to insufficient water reaching all areas.
• Unusual noises coming from the dishwasher, which may indicate a struggling or stuck diverter motor.
• Error codes displayed on the dishwasher that are related to water distribution functions.
• Leakage from the dishwasher base 

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This connector links mating components within the appliance to create a secure, reliable connection. Replacing a cracked or loose connector helps restore consistent operation and prevent intermittent issues caused by poor contact or separation. What it does:

• Creates a stable connection between mating parts or harnesses in the appliance
• Helps prevent looseness or separation that can disrupt performance
• Direct replacement for broken, brittle, or deformed connectors
• Can resolve intermittent operation traced to a poor connection at this junction

• 1 connector

• Disconnect power and, if applicable, shut off water before servicing
• Note orientation and positions before removal to ensure correct reassembly
• Seat the connector fully until any locking features engage; do not force
• Inspect mating parts for wear or damage and replace if necessary

This brace connector secures a support brace inside the appliance to help keep internal panels and assemblies aligned and stable. Replacing a worn or damaged connector restores proper support and reduces noise and movement. What it does:

• Fastens and stabilizes an internal support brace or frame
• Prevents panel or assembly movement that can cause vibration or rattling
• Helps maintain proper alignment of connected components
• Replaces broken or corroded connector hardware to restore secure mounting

• One brace connector

• Disconnect power (and gas, if applicable) before starting any repair
• Access may require removing outer or control panels; save existing fasteners for reuse
• Use basic hand tools; avoid overtightening to prevent cracking plastic or bending metal
• Inspect and replace as needed

This pump and motor assembly circulates and removes wash water so the appliance can drain properly. It replaces a worn or failed drain pump to restore normal water removal during the drain and spin cycles. What it does:

• Pumps water from the tub to the drain hose so the washer can empty
• Helps prevent standing water and reduces the chance of overflow or flooding
• Commonly used when the washer won't drain, shows error codes related to draining, or has water left in the tub
• Works with existing hoses and fittings to move wastewater out of the appliance

• One pump and motor assembly

• Disconnect power and turn off the water supply before starting any repair
• Access usually requires removing the lower service panel or front panel depending on model
• Inspect and clean drain hoses and clamps while replacing the pump to avoid repeats

A general-purpose replacement screw used to secure panels, trim or components on compatible Whirlpool appliances. This genuine-style fastener restores proper assembly and prevents loose or rattling parts for a safe, reliable fit. What it does

• Secures control panels, trim pieces, brackets or internal components to hold assemblies in place
• Restores lost or stripped fasteners that cause loose panels or vibration noise
• Helps maintain alignment of connected parts for correct operation and a finished appearance
• Compatible with applications that require the OEM W11232015 screw specification

• One replacement screw

• Use correct driver bit and gentle torque to avoid stripping the head or threads
• Replace only when the original fastener is missing or damaged; confirm length/thread before installation
• Disconnect power and follow appliance safety procedures when accessing internal components

Color: White. Size: 1 qt. can. Acrylic appliance paint.

This replacement manifold routes water inside the appliance so spray arms and wash chambers receive the proper flow for cleaning. Replaces a worn or cracked manifold to restore proper water distribution and reduce leaks. What it does:

• Directs inlet water to spray arms and internal wash channels for normal wash cycles
• Helps maintain consistent water flow for effective cleaning performance
• Stops or reduces leaks when replacing a cracked or damaged manifold
• Resolves symptoms like weak or no spray, water pooling, or visible leaks

• One replacement manifold

• Install requires access to the appliance interior and removal of panels—disconnect power and water before starting
• Tighten fittings to manufacturer torque recommendations and check for leaks after installation
• Inspect related hoses, clamps, and seals and replace if brittle or damaged

The Thermostat Clip is an OEM part for Whirlpool dishwashers. It plays an important supporting role by securely fastening the thermostat sensor inside the wash chamber. 

Symptoms of a faulty Thermostat Clip can include:

• Fluctuating or inconsistent water temperatures between cycles 
• Inability to properly detect temperature for desired heat levels
• Longer cycle times needed for reaching required temperatures
• Strange sounds or condensation around thermostat connection

Causes could arise from typical wear and tear stresses weakening plastic retaining clips. Exposure to harsh detergents may also erode clip material integrity over time.

This OEM replacement part is compatible with KitchenAid, Jenn-Air, Kenmore, and select Hotpoint and Roper dishwasher models as well. 

This replacement refrigerator door handle restores a secure, comfortable grip and the appliance's finished appearance. Designed to match the OEM fit for compatible Whirlpool refrigerators, it replaces a cracked or worn handle quickly. What it does:

• Provides a sturdy grip for opening and closing the refrigerator door
• Replaces broken, cracked, or damaged handles that affect use or appearance
• Aligns with factory mounting points for a proper fit
• Helps restore the appliance's original look and functionality

• Disconnect power to the appliance or unplug the refrigerator before beginning work.
• Most installations require a screwdriver; keep original screws and trim unless new fasteners are included.
• Support the door while removing and installing the handle to avoid damage.