Kenmore 79641982410 Parts

A molded water guide that routes dispenser water inside the refrigerator to the dispenser/ice area, helping direct flow and reduce splashing. Fits the factory mounting points for a clean, secure path for water. What it does

• Channels water from the inlet tubing toward the dispenser/ice assembly to prevent misdirected flow.
• Helps keep water from pooling or dripping inside the cabinet or on internal components.
• Common replacement when you see water on shelves, puddling near the dispenser, or reduced or misdirected dispenser flow.
• Preserves proper alignment of the dispenser plumbing to prevent kinks or strain on tubing.

• One water guide (single molded channel) as shown.

• Turn off the refrigerator and shut off the water supply before starting; disconnect power for safety.
• Remove interior panels or shelves as needed to access mounting points; keep fasteners for reassembly.
• Inspect adjoining tubing and seals for damage and replace any worn components to ensure a leak-free fit.
• After installation, restore power and water, then check carefully for leaks during an initial test dispense.

This multi wiring harness connects multiple components to the appliance's control system, providing the necessary connectors and wiring paths for reliable electrical communication and operation. What it does:

• Routes power and signals between the control board and components such as motors, sensors, and switches
• Replaces damaged or burnt wiring that can cause intermittent operation or component failures
• Restores proper connector fit to prevent loose connections and electrical faults
• Helps resolve symptoms like no-start, certain components not receiving power, or intermittent function

• One multi wiring harness as pictured

• Disconnect power to the appliance before servicing to avoid shock or damage
• Take photos of the original wiring routing and connector orientations before removal for reference
• Match connectors carefully and avoid forcing terminals; ensure secure, full seating of each plug
• Use proper routing and retainers to prevent pinching or contact with hot/moving parts

This lifter is a replacement drawer support that helps hold and guide a refrigerator/freezer drawer for smooth, even operation. Restores proper alignment and reduces sticking or uneven movement. What it does:

• Supports and stabilizes a sliding drawer so it opens and closes smoothly
• Helps maintain proper drawer alignment and load distribution
• Worn or broken lifters can cause sagging, binding, or uneven drawer movement
• Replaces damaged or missing lifter hardware to restore normal drawer function

• Disconnect power and empty the drawer before starting any repair
• Remove the drawer or access panel per your model's service instructions to reach the lifter
• Install the new lifter in the same orientation and secure any retaining clips or screws; do not force parts into place
• If fasteners or adjacent guides are damaged, replace them as well for a secure fit

This protective cover shields internal components and wiring from dirt, moisture and accidental contact, helping keep the appliance safe and functioning properly. It's a small replacement panel that restores the appliance's factory protection. What it does:

• Covers and protects internal parts and wiring from debris and accidental impact
• Prevents loose components from rattling or shifting during operation
• Helps maintain proper spacing and alignment of nearby panels and clips
• Addresses symptoms like visible damage, missing cover, exposed wiring, or unusual noise from loose trim

• Disconnect power before starting any repair to avoid shock or injury
• Typically secures with clips or a few screws; use basic hand tools and take care not to strip fasteners
• Inspect mounting tabs and surrounding trim for damage; replace any broken clips before reassembly

A replacement holder assembly that secures and supports internal components for proper alignment and operation. Restores stable mounting where the original bracket is cracked, bent, or broken so the appliance runs quietly and reliably. What it does

• Provides a secure mounting point for internal parts that rely on a fixed support
• Prevents rubbing, misalignment, and excess vibration caused by a damaged holder
• Helps restore correct component positioning to improve part interaction and operation
• Commonly used when the original bracket is cracked, worn, or no longer holds parts firmly

• One holder assembly

• Disconnect power before starting any repair; shut off water supply if the repair requires opening plumbing
• Basic hand tools typically required; handle clips and tabs gently to avoid damage
• Inspect adjacent components for wear and replace if needed for a long-lasting repair

The stator assembly is the stationary coil of your washer's direct-drive motor. It generates the magnetic field that spins and agitates the basket, helping restore proper movement when the original winding is worn or failed. What it does:

• Produces the electromagnetic field that drives the rotor and basket
• Common fix for no-spin, no-agitate, or weak/intermittent motor performance
• Helps restore smooth, consistent basket speed and torque

• One stator assembly

• Disconnect power and ensure stable access to the appliance before starting
• Access the motor from the bottom or rear; remove the rotor cap/center bolt and rotor before the stator
• Handle the rotor's strong magnets with care; support the tub and keep fingers clear
• Reconnect wiring harnesses fully seated and route as original; tighten mounting bolts evenly

This hose connector attaches the appliance's water hose to the inlet, restoring a secure, leak-free water connection. Use it to replace a cracked, brittle, or leaking connector and get reliable water flow back to the appliance. What it does:

• Connects the supply hose to the appliance water inlet to allow proper water flow
• Replaces damaged or worn connectors that can cause visible leaks
• Addresses symptoms like leaks at the hose connection, intermittent filling, or reduced water flow
• Provides a direct, OEM-style replacement when the original connector fails

• Turn off the water supply and disconnect power before starting
• Inspect and replace any worn O-rings or seals; use only parts specified for your model
• Hand-start threads to avoid cross-threading, then tighten securely; test for leaks after installation

This inlet hose connects the home water supply to the washer's fill valve to allow proper water flow during cycles. Replacing a damaged inlet hose restores reliable filling and helps prevent leaks and water damage. What it does:

• Carries cold (or hot, depending on installation) water from the household supply to the washer fill valve.
• Stops leaks caused by cracked, split, or deteriorated hose material at the supply or machine connection.
• Resolves slow or no-fill symptoms when a damaged hose is restricting water flow.
• Helps prevent water pooling and floor damage from failing or loose inlet connections.

• One inlet hose assembly

• Turn off both the home's water supply and the appliance power before replacing the hose.
• Drain remaining water from the old hose and fittings, then disconnect fittings carefully to avoid spills.
• Hand-tighten connections, then give an additional quarter turn with a wrench—do not overtighten.
• Inspect fittings and replace any damaged washers or gaskets; check for leaks after reconnecting.

This outer door frame restores the front-facing trim and mounting structure of a refrigerator door, improving appearance and helping the door seal and align correctly. Use when the door shows visible damage, dents, or loose trim. What it does:

• Replaces the exterior trim and structural frame around the refrigerator door
• Restores proper door appearance and helps maintain correct alignment
• Can reduce air leaks caused by warped or damaged door framing
• Useful when trim is cracked, dented, or the door edge is separated

• High-level replacement; may require removing the door and interior panels for access
• Keep track of screws and clips — some fasteners are reused
• Disconnect power and empty the door shelves before starting to avoid damage or injury

The Shipping Bolt is an OEM part for LG washing machines, designed to secure the washing machine's drum during transportation. These bolts are important for preventing damage to the drum and suspension system by immobilizing the drum, thereby avoiding any excessive movement or vibrations that could occur while moving the appliance. 

Causes of a bad shipping bolt can include improper removal during installation, damage from handling, or degradation over time if it was left in place during operation. A damaged or missing shipping bolt can lead to issues with the washing machine's drum alignment and overall stability.

Symptoms that indicate the shipping bolts need removal or installation include:

• Excessive noise or vibrations during operation, suggesting the bolts were not removed after installation.
• Damage to the washing machine's drum or suspension system after moving the appliance without the bolts properly installed.

This OEM LG part can also be used on Kenmore/Sears appliances. 

Secures the washer’s tub and basket during moving to prevent internal damage. If the originals are missing after a move, install replacements for transport and remove them before using the washer.

What it does

• Locks the tub and basket to limit movement in transit
• Helps prevent suspension damage and internal rattles while relocating
• Replaces missing, bent, or stripped transport bolts
• Useful for moves, storage, or service shipments

What’s included
One shipping bolt assembly (sold individually).

Install notes

• Unplug power and turn off water before service
• Insert through the rear panel into the designated mounting point; tighten snugly—don’t overtighten
• Do not operate the washer with shipping bolts installed; remove all bolts after placement
• Some models use multiple bolts and lengths—match count/positions to your owner’s manual

Usage tip
After removal, bag and tape the bolts to the cabinet so they’re on hand for the next move.

The Air Chamber is an OEM part for LG washing machines. This part connects to the pressure switch and ensures the washer machine fills with the correct amount of water for the selected cycle. 

Causes of a bad  Air Chamber can include clogging due to detergent residue or debris, cracks or perforations that lead to air leaks, and aging of the material, which might compromise its integrity and function.

Symptoms of a faulty Air Chamber include:

• Inaccurate water level readings leading to overfilling or insufficient water during cycles
• Unusual noises during the fill cycle, indicating air escaping
• The washing machine failing to start the wash cycle due to improper water level detection
• Error codes displayed on the machine that relate to water level issues

This OEM LG part is also compatible with some Kenmore models.

Includes sensor probe