Kenmore Calypso Elite Parts

This guide assembly rail replaces a worn or damaged drawer slide to restore smooth, stable drawer movement and proper alignment. It helps reduce sticking, misalignment, and rattling for a secure fit and quiet operation. What it does:

• Guides and supports the drawer or compartment during open/close cycles
• Restores smooth sliding action and consistent alignment
• Reduces noise caused by worn or bent rails or guides
• Helps prevent drawers from catching or binding

• Disconnect power and empty the drawer before beginning service
• Removal of the drawer and access panel may be required; keep fasteners for reassembly
• Align the rail before tightening fasteners; use basic hand tools

This front plate assembly is the exterior cover that protects and finishes the front of the appliance panel while keeping internal components secure and aligned. It restores the appliance's appearance and helps maintain proper operation. What it does:

• Covers and protects controls, brackets, and internal components located at the front of the appliance
• Replaces cracked, bent, or cosmetically damaged front plate panels
• Helps prevent debris and moisture from reaching internal parts that can cause malfunctions
• Restores a clean, finished look to the appliance front

• Disconnect power to the appliance before starting any repair to avoid electrical shock
• Handle the part carefully to avoid scratching or damaging the finish during installation
• Installation may require removal of adjacent trim or control panel components; keep fasteners organized

This replacement burner is the cooktop surface heating element that provides consistent heat for pots and pans. It restores stovetop cooking performance and is sized to match the original heating location. What it does:

• Heats cookware on the stove top for boiling, frying, and simmering
• Replaces a cracked, non-heating, or intermittently working surface element
• Helps eliminate uneven heating and hotspots caused by a failing burner
• Designed to mate with the original cooktop terminals for proper electrical connection

• Disconnect power at the breaker before starting any repair to avoid shock
• Allow the cooktop to cool fully and handle the element carefully to avoid glass/ceramic damage
• Secure all connections

Replacement electronic controller that manages the appliance's main functions and user interface, restoring control of cycles, timing and display responses. Use this board to replace a failed or unresponsive controller and return reliable operation. What it does:

• Controls cycle timing, sequencing and key operational logic for the appliance.
• Interfaces with the user controls and display so selections and commands register correctly.
• Regulates signals to motors, valves and heaters as directed by the control program.
• Symptoms of a failing controller may include unresponsive buttons, incorrect or flashing error codes, display problems, or the appliance not starting.

• Always disconnect power to the appliance before starting any repair to avoid shock or damage.
• Handle the board by its edges and avoid touching circuitry; use proper ESD precautions if available.
• Basic tools are typically required to access the control housing.

This door gasket creates a tight seal around the refrigerator door to help maintain consistent internal temperature and reduce energy use. Replacing a worn or torn gasket restores door sealing and helps prevent frost buildup. What it does:

• Seals the refrigerator door edge to keep cold air in and warm air out
• Helps prevent frost and ice buildup in the fresh food or freezer compartment
• Common symptom: visible cracks, tears, or a gap causing warm food or temperature fluctuation
• Common symptom: condensation or frost along the door seal or inner cabinet

• Turn off power to the appliance and empty the door area before starting
• Remove the old gasket carefully; inspect and clean the gasket channel and mating surface before installing
• Press the new gasket into the channel evenly; ensure magnets seat fully for a consistent seal

This tray cover assembly replaces a cracked or missing ice tray cover to keep ice protected and help the ice bin stack and slide correctly. It restores a clean seal and simple access to the ice storage area. What it does:

• Covers and protects ice in the ice bin from odors and debris
• Helps maintain proper alignment and sliding action of the ice bin
• Prevents spills and reduces ice melting caused by gaps or damage
• Commonly replaced when the cover is cracked, warped, or missing

• One tray cover assembly

• Disconnect power to the appliance before servicing to avoid injury
• Remove the ice bin and any remaining ice before installing the cover
• Handle plastic components carefully to avoid cracking; align tabs and slides before seating

This genuine door gasket assembly replaces a worn or damaged refrigerator door seal to restore a tight closure and help maintain proper temperature. It's a direct-fit replacement that keeps cold air in and warm air out for better cooling performance. What it does:

• Seals the refrigerator door edge to prevent air leaks and reduce frost buildup
• Helps maintain consistent internal temperatures for food safety
• Reduces excessive compressor run time caused by a failing seal
• Stops drafts and moisture intrusion that can cause ice or condensation

• One door gasket assembly as shown

• Unplug the appliance before starting any work and remove any items from the door
• Peel out the old gasket and clean the gasket channel before installing the new seal
• Fit the gasket into the channel, working around the door so the seal seats evenly; warm water or a hair dryer may help soften the gasket for easier installation (use low heat)
• Check the door swing and seal around the perimeter after installation

This door basket is a replacement refrigerator door bin that restores secure storage on the door shelves, helping keep bottles, condiments and small items organized and upright. What it does:

• Replaces a cracked, broken or missing door bin so items no longer fall out when opening the door
• Provides a molded shelf edge to keep bottles and containers upright
• Restores original storage capacity and organization to the refrigerator door
• Designed to snap into the door shelf mounting points for a stable fit

• One refrigerator door basket

• Remove all items from the door before replacing the bin
• Align the bin with the door shelf mounting slots and press until it snaps into place
• No special tools typically required; handle with care to avoid cracking plastic

This inner oven door glass replaces a cracked, broken or fogged inner door panel to restore thermal performance and visibility into the oven cavity. It helps keep heat in the oven and prevents direct exposure to the internal cavity. What it does:

• Replaces damaged or cracked inner oven door glass that can compromise heating and safety
• Restores the oven door's insulating layer to reduce heat loss and improve cooking consistency
• Provides a clear viewing window to check food without opening the door
• Stops rattling or vibration caused by loose or broken glass

• Disconnect power to the appliance and ensure the oven is completely cool before starting
• Wear cut-resistant gloves and eye protection when handling glass to avoid injury
• Some installations require removing the oven door and disassembling door screws or clips; keep fasteners organized

The Drain Tube Assembly is an OEM part for LG refrigerators. This drain tube assembly is responsible for directing condensation and melt water that accumulates in the refrigerator away to the evaporator pan.

Causes can include cracks developing from limescale or mineral accumulation, flexing fatigue from repeatedly catching drips, or damage from improper cleaning methods.

Symptoms of a bad drain tube assembly include:

• Puddles or leaks developing underneath the refrigerator
• Poor air flow from vents and higher temperatures
• Ice or moisture buildup in refrigerator walls and seals
• Water stains or corrosion appearing inside the unit

This OEM LG part is also compatible with some Kenmore models.

This dispenser door link connects the dispenser actuator to the refrigerator dispenser door so the door opens and closes smoothly when dispensing. Replaces a worn or broken link to restore proper dispenser door movement. What it does:

• Transfers motion from the dispenser actuator to the dispenser door so the door opens when dispensing
• Keeps the dispenser door aligned for proper sealing and closure
• Can fail if the door won't open, sticks, or the dispenser lever feels loose or disconnected
• Compatible with dispenser assemblies that use a separate plastic/metal link between actuator and door

• Disconnect power to the appliance before starting any work
• Access may require removing the dispenser trim or front housing—keep fasteners organized
• Handle plastic components carefully to avoid cracking; inspect surrounding parts for wear

This wire rack provides a sturdy, corrosion-resistant shelf surface to support food containers, pans and other items inside the compartment. It restores usable storage space and helps keep items organized and level. What it does

• Replaces a bent, broken or missing wire shelf so items sit flat and don't slide or tip
• Supports dishes, trays and food containers for safe storage and even airflow
• Maintains proper spacing for drawers and other interior components to operate
• Visible wear or rust on the wires can cause sharp edges or instability

• High-level swap: remove any items, lift out the old rack and set the new rack into the existing support grooves or clips
• No special tools typically required; gentle pressure may be needed to seat rack into supports
• If rack has mounting clips, confirm clips are intact and positioned correctly before use
• For safety, avoid forcing parts;

A genuine replacement refrigerator door handle that restores a secure grip and reliable opening on compatible units. Designed to match the original fit and finish so you can use the door normally again. What it does:

• Replaces a broken, cracked or missing refrigerator door handle
• Provides a solid grip for opening and closing the door smoothly
• Restores proper alignment and appearance of the door front
• Helps prevent further damage from improvised grips or taped-on handles

• One replacement refrigerator door handle

• Basic hand tools typically required; follow the OEM instructions for fastener locations
• Work carefully to avoid scratching the door finish and to retain any mounting clips or screws
• If the handle is near electrical components, unplug the appliance or disconnect power before starting

This bucket cover restores the top enclosure of the washer tub so water stays contained and the wash basket operates as designed. It helps protect laundry and internal components from splashes and debris. What it does:

• Fits over the wash bucket to cover the tub opening and direct water flow
• Helps prevent water spray and leaks during fill and spin cycles
• Keeps clothing and loose items from entering the tub gap
• Contributes to stable basket operation and reduces direct contact with internal parts

• Disconnect power and water supply before beginning any repair
• Remove the cabinet or access panel as required by your model to reach the bucket area
• Use appropriate hand tools; support the tub/basket to avoid displacement during removal/installation
• Follow OEM instructions for torque, alignment, and reassembly

This fan grille assembly directs airflow and protects the appliance fan while maintaining proper ventilation for cooling performance. It replaces a damaged or cracked grille to help reduce restricted airflow and rattling noises. What it does:

• Guides and channels air from the fan to improve circulation within the appliance
• Helps protect the fan blades from debris and accidental contact
• Reduces vibration-related noise caused by a broken or loose grille
• Restores a finished appearance to the fan area and helps maintain proper airflow paths

• One fan grille assembly as shown

• Disconnect power to the appliance before beginning any service
• Secure with clips or screws; retain fasteners and note their locations during removal
• Handle the grille gently to avoid cracking plastic tabs; align tabs before snapping into place
• If other components are damaged, inspect surrounding area and replace as needed