Kenmore Elite He3 Washer Parts

This controller assembly is the main electronic control board that manages temperature, compressor, defrost, and user interface functions for compatible refrigerators. Replaces a failed control to restore normal electronic control and display operation. What it does:

• Controls compressor cycles, defrost timing, and temperature regulation for the refrigerator
• Interprets user inputs from the console and updates the display/status lights
• Can resolve symptoms like unresponsive controls, blank or erratic display, or incorrect temperature control
• Works with associated sensors and relays to coordinate cooling and defrost cycles

• One controller assembly as shown

• Disconnect all power before attempting repair to avoid shock or damage
• Handle the board by its edges and avoid static discharge; use a grounding strap if available

This genuine oven bake element heats the oven cavity for baking and roasting, restoring proper cooking temperatures and consistent results. Replaces a damaged or non-heating bake element to bring your oven back to service. What it does:

• Heats the oven cavity so food reaches and holds set temperatures
• Restores even baking and roasting when the oven fails to heat
• Replaces elements that show visible damage, burn-through, or no glow
• Works with electric ovens that use a separate bake heating element

• Disconnect power to the appliance at the breaker before starting work
• Handle the element carefully to avoid bending or damaging terminals
• Remove oven racks and access the element from inside the oven
• Verify proper fit and secure mounting; tighten terminal fasteners firmly and restore power to test

This oven bake element replaces the lower heating element in compatible electric ranges to restore normal baking and roasting performance. It provides a direct heating surface that converts electrical energy into consistent oven heat. What it does

• Heats the oven cavity during bake cycles to cook food evenly.
• Commonly used when the oven fails to reach set temperatures.
• Visible signs of failure include breaks, blisters, or the element not glowing.

• Disconnect power to the appliance at the breaker before starting work.
• Handle with care; wear gloves to avoid cuts from sharp mounting edges.
• Verify fit and terminal type match your oven before installation.

This thermo disc is a small temperature-sensing switch that helps monitor and control appliance temperatures to protect components and support proper operation. It fits into the appliance's temperature circuit and responds at a designed trip point. What it does

• Senses temperature and opens or closes an electrical circuit at its rated trip point
• Helps prevent overheating by interrupting power when temperatures exceed the design threshold
• Supports proper temperature control for timed cycles or safety systems
• Commonly used in temperature-regulation and safety applications inside appliances

• One thermo disc

• Disconnect power to the appliance before starting any repair to avoid shock or injury
• Replace only with the exact part number for proper function and safety
• Handle the disc carefully; avoid bending or damaging the sensing element or terminals

This water inlet valve controls water flow to the refrigerator's dispenser and ice-making system, restoring proper water delivery when the factory valve fails. Designed as a direct-replacement valve assembly for compatible Frigidaire units. What it does

• Opens and closes to allow water into the ice maker and door dispenser when signaled
• Prevents water flow when the dispenser or ice maker is inactive
• Common symptom: dispenser or ice maker does not dispense water or fills slowly
• Common symptom: water intermittently flows or the ice maker fails to fill

• Disconnect power and shut off the water supply before beginning work
• Drain remaining water from lines to limit spills during removal
• Replace mounting hardware and tubing fittings exactly as removed; use plumber's tape where appropriate on threaded connections
• Inspect connections and test for leaks after restoring power and water

This control panel assembly replaces the range/oven electronic console that houses the touch controls and display, restoring user input and status readouts for cooking cycles and timed functions. What it does:

• Provides the front-facing buttons/touchpad and electronic display used to set temperatures, timers, and cooking modes
• Relays user commands to the oven/range control board so cycles start and stop as expected
• Restores visible status indicators and time-of-day display for normal operation
• Commonly corrects symptoms like unresponsive buttons, blank or erratic display, or controls that fail to register input

• Disconnect power to the appliance before servicing to avoid shock or injury
• Handle the assembly and display lens carefully to avoid scratches or damage
• Test all functions after installation;

This OEM oven bake element restores the oven's primary heating surface so your appliance can reach and maintain baking temperatures. It heats food evenly for baking and roasting when the oven's bake circuit is functioning. What it does:

• Heats the oven cavity for baking and roasting cycles
• Replaces a burnt, broken, or open bake element to restore heat
• Helps correct symptoms like no heat or reduced oven temperature during bake
• Works with the oven's bake control and thermostat to regulate cooking temperature

• Includes: 1 bake element

• Disconnect power (unplug or shut off circuit breaker) before servicing
• Handle the element and terminal connections carefully to avoid damage
• Mounting hardware or terminal nuts may be reused if serviceable;

This support is a replacement mounting bracket that secures internal components and restores proper alignment and stability. Use it when a broken or missing support causes rattling, misalignment, or loose parts. What it does:

• Provides structural support for internal assembly parts to prevent movement or vibration
• Restores proper alignment so doors, drawers, or moving components operate smoothly
• Stops noises and rubbing caused by a cracked or missing bracket
• Helps maintain safe, reliable operation by keeping parts secured

• High-level replacement: remove access panels and fasteners to reach the damaged bracket; mirror steps to reinstall
• Use the same screw locations and hardware as the original; retain mounting screws when removing the old part
• Disconnect power before accessing internal components to reduce shock risk

This insulator is a molded protective cushion that reduces vibration and protects nearby components from wear or contact. It helps keep parts stable and minimizes noise for smoother appliance operation. What it does:

• Cushions components to reduce vibration and rattling
• Protects wiring, tubing, and panels from abrasion and impact
• Helps maintain proper spacing between parts to prevent rubbing
• Can reduce operational noise caused by loose or contacting parts

• One insulator

• Disconnect power to the appliance before starting any repair
• Remove the access panel(s) needed to reach the mounting area; retain fasteners
• Press or slide the insulator into the correct position; it fits snugly and secures the component
• If removal requires cutting old adhesive or clips, replace with equivalent fasteners or adhesives approved by the manufacturer

This regulator controls and stabilizes the gas pressure delivered to the appliance so burners and the oven heat consistently. Replacing a faulty regulator restores proper flame performance and helps the appliance reach correct cooking temperatures. What it does:

• Regulates incoming gas pressure to the burner manifold and oven burner
• Helps maintain steady, even flame height during operation
• Can correct symptoms like weak or uneven flames and inconsistent heating
• Works as part of the gas supply system to protect downstream components

• One regulator

• Turn off the gas supply and power to the appliance before starting work
• Inspect gas fittings and use approved thread sealant where required by code
• After installation, check all gas connections for leaks and proper operation

This multi-connector wire harness restores electrical connections between appliance components so controls and features receive power and signals. Replacing a damaged harness helps stop intermittent operation and restore reliable function. What it does:

• Routes power and signal connections between control boards, switches, and components
• Replaces cracked, burned, or frayed wiring that can cause intermittent or no operation
• Fixes symptoms such as controls not responding, lights or displays failing, or specific functions not working
• Provides factory-style connectors for a direct plug-in replacement

• Disconnect power (unplug or shut off breaker) before starting any repair
• Match connector shapes and pin counts; do not force connectors together
• Secure harness away from hot or moving parts and use existing clips or fasteners

This wiring harness connects electrical components so your appliance receives reliable power and signal communication. Replacing a damaged harness restores proper electrical flow and helps prevent intermittent operation or control errors. What it does:

• Routes power and control signals between components like switches, sensors, and control boards
• Replaces brittle, frayed, or corroded wires that can cause intermittent operation
• Helps resolve symptoms such as unresponsive controls, no power to a circuit, or erratic component behavior
• Maintains secure plug-to-socket connections to reduce arcing and poor contact

• Disconnect power to the appliance before starting any repair to avoid shock or short circuits
• Compare the harness connectors to the original to ensure correct fit and routing before installation
• Secure harness routing away from sharp edges and heat sources; use existing clamps or ties