Kfis29pbms Parts

This slide is a direct-fit replacement guide that restores smooth, stable movement for a refrigerator drawer or shelf. It helps the drawer track correctly and prevents binding or uneven operation. What it does:

• Guides and supports a refrigerator drawer or shelf for smooth, controlled opening and closing
• Replaces worn, damaged or missing slide hardware that causes sticking or uneven movement
• Helps maintain correct alignment so the drawer loads and unloads without jamming
• Commonly used when a drawer drops, tilts, or does not track properly

• One replacement slide

• High-level installation: remove the drawer or shelf, unfasten the old slide, and install the new slide using existing mounting holes and hardware
• Inspect mating tracks and mounting points for damage; clean debris before installing
• Use proper tools and avoid overtightening fasteners to prevent cracking the slide or mounting bosses
• Disconnect power only if required by your appliance model; follow all manufacturer safety instructions

Size: 1/4 lb.

Size: 1/4 inch.

This door closer secures the appliance door and helps it close smoothly so the unit seals correctly. It restores proper door engagement and reduces gaps that can cause leaks or operation errors. What it does:

• Acts as the door latch/closer to hold the door shut during operation
• Helps the door close smoothly and stay aligned for a tight seal
• Commonly replaces worn or broken closers that prevent the door from latching
• Can resolve symptoms like a door that won't stay closed, won't latch, or closes unevenly

• Disconnect power and any fuel source before beginning work
• Remove the door or access panel per your model's instructions to reach the closer
• Inspect mounting points and strike before installing; align the latch for smooth operation
• Test the door several times after installation to ensure proper engagement and sealing

This shaft is the replacement rotating shaft used to support and align the appliance drum or tub, restoring smooth rotation and reducing noise from worn or damaged drive components. What it does:

• Provides a stable mounting point for the drum/tub to rotate smoothly
• Transfers rotational motion and helps maintain drum alignment
• Prevents wobble and uneven wear caused by a damaged shaft
• Commonly replaces a worn or noisy shaft that causes grinding, scraping, or rough drum rotation

• Disconnect power to the appliance before starting any repair
• Some disassembly of the cabinet and drum/tub is required
• Inspect related rollers, bearings, seals and fasteners; replace any worn components to prevent repeat failure
• Use appropriate tools and safety gear

This pantry front cover replaces a damaged or worn interior trim piece to restore a clean look and proper protection for items stored in the refrigerator pantry area. It provides a finished edge and helps keep food contained. What it does:

• Covers and protects the front edge of the refrigerator pantry compartment
• Restores a finished interior appearance after cracks, chips, or wear
• Helps keep stored items from catching on or falling off the pantry shelf
• Compatible with factory mounting points for a secure fit

• One pantry front cover (single piece)

• Installation generally requires removing pantry shelf/drawer and snapping or screwing the cover into factory mounting points
• Handle parts carefully to avoid scratching the finish; use non-marring tools when prying or aligning
• Disconnect power only if removal requires reaching electrical components; otherwise power disconnection is not typically necessary
• If mounting clips or fasteners are broken, replace them to ensure a secure fit

The Pan-Drip is an OEM part for Whirlpool refrigerators. It is designed to collect and manage condensation and any water that may drip inside the refrigerator, preventing it from pooling at the bottom of the appliance. This pan measures approximately 20 inches by 16 inches with a 2-inch depth.

Causes of a bad pan-drip can include wear and tear over time, cracks or breaks due to impact, and buildup of dirt or debris that can block proper drainage. When the pan-drip fails, it can lead to water accumulation and potential leaks.

Symptoms of a bad Pan-Drip include:

• Water pooling inside the refrigerator
• Leaks from the bottom of the refrigerator
• Visible cracks or damage to the pan
• Mold or mildew buildup due to improper drainage

This OEM part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and Kenmore models.

The Heater is an OEM part for Whirlpool refrigerators. It is a thin heating element located behind the cover for the ice compartment inside the fresh food section that functions to prevent condensation from accumulating.

Causes of a bad heater can include failure of the heating element over many cycles of use, cracks or breaks due to normal wear and tear or repeated door opening/closing stress.

Symptoms of a bad heater include:

• Foggy or clouded refrigerator door panels
• Visible condensation building up inside refrigerator doors
• Potential for water droplets or leaks inside door panels

This OEM Whirlpool part is also compatible with Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper and some Kenmore models.

This condenser fan blade moves air across the refrigerator's condenser coil and compressor to remove heat, helping the unit cool efficiently. Replace a cracked, warped, or loose blade to restore proper airflow and reduce noise.

• Circulates air through the condenser section to dissipate heat from the refrigerant
• Supports stable fridge and freezer temperatures and efficient compressor operation
• Common symptoms: rattling/scraping noises, weak or no airflow at the rear/bottom, longer run times, or warming compartments
• Replace if the blade is cracked, warped, wobbling, or loose on the motor shaft

• Disconnect power and pull the refrigerator away from the wall; remove the rear access panel to reach the condenser fan
• Note the original blade orientation/rotation; remove the old blade from the motor shaft (release any retainer if present)
• Press the new blade onto the shaft until fully seated; ensure it spins freely with proper clearance and airflow direction
• Reinstall the panel, restore power, and verify normal airflow and sound

This rubber grommet cushions and seals a wiring, hose, or shaft opening to help prevent abrasion, reduce vibration, and maintain a snug fit for quieter, safer appliance operation. What it does:

• Protects wiring, hoses, or moving shafts from chafing and wear
• Helps seal openings to limit water, air, or lint intrusion
• Dampens vibration and reduces noise where panels or components meet
• Worn or damaged grommets can cause rubbing sounds, visible wear, loose hoses, or leaks

• Disconnect power (and water if applicable) before beginning any repair
• Push-fit replacement in most applications; a small screwdriver or needle-nose pliers can help with removal or alignment
• Inspect surrounding seals, hoses, and mounting surfaces and replace damaged parts as needed