Kfis29pbms Parts

The Tube-Water is an OEM part for Whirlpool refrigerators. It is a flexible tubing component responsible for transporting water from the main household supply line to the icemaker within the freezer.

Causes of issues with the water tube can include mineral buildup restricting flow over time, cracks or kinks developing from repeated bending during installation/removal, or accidental punctures and tears. 

Symptoms of a bad water tube include:

• Slow or absent filling of the icemaker basket
• Leaks or moisture in unintended areas near connections
• Noticeable bulges, weak spots, or restricted flexibility in the tubing

This OEM replacement is also compatible with models from Maytag, KitchenAid, Jenn-Air and more. 

This electronic control board replaces the main console control that manages cycles, display, and user inputs so your appliance responds correctly to settings and starts/stops as commanded. It restores proper control when the original board fails. What it does:

• Receives input from buttons/knobs and runs the appliance's programmed cycles
• Controls the display and indicator lights for status and error codes
• Starts, stops, and sequences functions such as timers, heaters, and motors
• Common symptoms: unresponsive controls, blank or erratic display, cycles won't start or complete

• One electronic control board as shown

• Disconnect power (unplug or shut off breaker) before servicing to avoid shock
• Handle the board by edges and avoid electrostatic discharge; use an ESD strap if available
• Verify connector locations and orientation before removing the old board; replace all screws/clips
• After installation, restore power and run a test cycle to normal operation

This water tube directs water from the household supply to the appliance dispenser or ice/water system, helping ensure a steady flow for dispensing and filling. It's a direct-fit replacement designed to restore proper water routing. What it does:

• Channels water from the inlet to the dispenser, ice maker or fill components
• Helps stop leaks and flow interruptions caused by cracked, clogged or damaged tubing
• Restores proper water delivery for consistent dispensing and ice production
• Works as the fluid pathway between supply valve and internal components

• Disconnect power and shut off the water supply before starting any work
• Handle and route the tube carefully to avoid kinks or sharp bends that can restrict flow
• Use proper clamps or fittings and tighten to manufacturer torque recommendations

Color: White. Size: 1 qt. can. Acrylic appliance paint.

This is a replacement 8-18 thread screw used to secure panels and components on compatible Whirlpool appliances. It provides a simple, reliable fastener to restore proper fit and reduce rattling or loose parts. What it does:

• Fastens panels, brackets, or small components where an 8-18 thread screw is required
• Restores secure attachment to stop vibrating, loosening, or misalignment
• Works wherever the OEM 8-18 thread screw is specified in the appliance
• Small, durable fastening solution for routine part replacement

• Use the correct screwdriver or nut driver to avoid stripping the head
• Thread into the mating hole carefully; do not cross-thread
• Tighten until snug—avoid overtightening which can strip threads or crack plastic
• Disconnect power and follow appliance safety guidelines before accessing internal parts

This heater fill tube directs water to the appliance's heating area to enable proper operation and efficient cycles. Replacing a damaged or clogged tube restores correct water routing and helps prevent leaks or heating issues. What it does:

• Routes incoming water to the heater/float area so the appliance can heat and process water as intended
• Prevents leaks by maintaining a secure, routed path for water flow
• Helps avoid poor heating performance caused by blockages or cracks in the tube
• Commonly replaced for visible cracks, splits, or when water sprays or leaks near the heater area

• One heater fill tube

• Disconnect power and shut off water supply before beginning any repair
• Inspect surrounding hoses, clamps, and fittings; replace any damaged hardware for a reliable seal
• Use basic hand tools; follow the appliance service manual for disassembly and routing details

This trivet is a metal oven broiler support that holds the broiler pan and helps position food for even broiling. It restores correct spacing and support inside the oven so broiling and roasting perform as intended. What it does:

• Supports the broiler pan or drip tray so food sits at the proper height from the broiler element
• Helps promote even browning and consistent broiling results
• Replaces a bent, warped, or missing trivet that can cause unstable pans
• Fits into the oven cavity where the original trivet installs

• One oven trivet

• Install by sliding or seating the trivet into the factory support slots; no tools usually required
• Ensure the oven is completely cool and disconnected from power before handling
• Handle carefully—edges may be sharp and the part may be heavy when metal

This glass crisper shelf provides a sturdy, flat surface for the refrigerator crisper area so fruits and vegetables are stored safely and organized. Replaces a cracked, chipped, or missing crisper shelf to restore usable storage space. What it does:

• Replaces the glass shelf that sits over the crisper drawer, supporting produce and other items
• Restores a smooth, even surface when the original shelf is cracked, chipped, or broken
• Helps prevent food from falling into the crisper compartment due to damaged glass
• Allows drawers and storage above the crisper to slide and sit properly when shelf is intact

• Handle with care; glass can break—wear gloves and eye protection during removal/installation
• Remove food and any loose components from the area before replacing the shelf
• Support the shelf while sliding it into position to avoid dropping or chipping
• Align it evenly and test drawer movement before restocking

This rear crisper drawer support secures and aligns the refrigerator crisper, keeping the drawer stable and allowing smooth sliding. Replace a worn or broken rear support to restore proper drawer fit and prevent sagging or misalignment. What it does:

• Holds the rear of the crisper drawer on its track so the drawer stays level during use
• Guides and stabilizes drawer movement to prevent sticking or uneven travel
• Prevents the crisper from tilting, falling, or binding when opening and closing
• Works with the existing front support and drawer components to maintain fit

• One rear crisper drawer support (quantity: 1)

• Remove food and the crisper drawer before replacing the support
• Most repairs are simple and require only basic hand tools; handle plastic parts gently to avoid damage
• Disconnect power to the appliance before servicing if you need to move or access electrical components