Kfut1826mw1 Parts

This cabinet breaker kit forms the insulating trim around the appliance opening. It provides a proper surface for the door or lid gasket to seal against and helps minimize condensation along the edge for clean, reliable performance.

• Creates the thermal break and finished edge around the cabinet opening
• Supports correct seating of the door/lid gasket for a consistent seal
• Helps reduce sweating or moisture at the perimeter
• Replaces cracked, warped, or missing breaker trim components

• Disconnect power before servicing; wear cut-resistant gloves
• Remove the door/lid if required for access and retain all fasteners
• Carefully remove old breaker components and clean the mounting surfaces
• Install the new breaker and corners, align evenly, avoid overtightening, and verify the gasket seals all around

This door closer with cup mounts on the hinge to control the door's final closing motion. It restores smooth, consistent closing and helps the gasket seal evenly to maintain proper temperatures.

• Provides hinge cam action that pulls the door closed during the last few inches
• Helps keep the door aligned so the gasket seals evenly around the cabinet
• Reduces slamming and prevents the door from drifting or popping back open
• Common symptoms of wear: clicking/grinding at the hinge, sagging or rubbing, poor self-closing, or moisture/frost near the door

• Unplug the refrigerator and remove items from the door to reduce weight
• Support the door; remove hinge cover and fasteners, then lift the door off to access the closer components
• Match the original orientation; install the new closer and cup on the hinge/door seats
• Reinstall and align the door; tighten hinge screws and verify smooth self-closing and gasket contact

This glass crisper shelf replaces a cracked or missing refrigerator crisper shelf to restore a flat, stable surface for produce storage. It provides a clear, durable platform that supports the crisper drawer and items stored above it. What it does:

• Replaces a broken or chipped crisper glass shelf
• Restores level support for the crisper/drawer area so items sit securely
• Helps keep fruits and vegetables organized and accessible
• Reduces risk of items falling into the crisper area due to missing glass

• Remove all food and the crisper drawer before replacing the shelf
• Handle glass carefully and wear cut-resistant gloves if glass is broken
• Set the new shelf gently into the support rails; it sits level before replacing the drawer
• If support rails or clips are damaged, replace those parts first

This bottom hinge replaces the lower door pivot on compatible Frigidaire refrigerators to restore proper door alignment and smooth opening. It provides a secure pivot point to help maintain an even close and consistent seal. What it does:

• Supports and pivots the lower edge of the refrigerator door for smooth opening and closing.
• Helps maintain correct door alignment so the gasket seals evenly.
• Common replacement for doors that sag, bind, or do not close evenly.
• Works with the factory mounting hardware and hinge locations on compatible models.

• Disconnect power and remove food and loose items from the door before starting.
• Always support the door while removing or installing the hinge to prevent injury or damage.
• Use appropriate hand tools and avoid overtightening fasteners; check door alignment after installation.
• Refer to your model's service manual or official parts diagram for model-specific steps and torque specs.

This bracket grommet cushions a component where it mounts to a bracket in your refrigerator. It isolates metal-to-metal contact to reduce vibration and rattling and helps keep parts aligned for quieter, reliable operation.

• Fits into a mounting bracket to provide a cushioned seat for a component
• Isolates vibration and reduces noise by preventing metal-to-metal contact
• Helps maintain secure mounting and proper alignment
• Common signs of wear: cracking, flattening, missing grommet, increased vibration or rattling

• Disconnect power before servicing; shut off water supply if working near water lines
• Access the bracket and support the mounted component to relieve weight
• Remove the worn grommet and press the new grommet fully into the bracket opening
• Reassemble and snug fasteners—do not overtighten, so the grommet can isolate vibration

This seal strip replaces a worn or damaged door gasket edge to restore a proper seal and help the appliance maintain temperature and operate quietly. It's a direct-fit service part used where a continuous seal is required. What it does:

• Provides a flexible barrier along the door/frame to reduce air leaks and heat/cold loss
• Helps prevent moisture buildup and improves energy efficiency when sealing is restored
• Reduces rattling and vibration caused by a compressed or torn seal edge
• Commonly replaced when the strip is torn, missing, or no longer adheres properly

• One seal strip

• Disconnect power to the appliance before servicing to avoid electrical or burn hazards
• Clean and dry the mounting surface; remove old adhesive or residue for best adhesion
• Align the strip carefully and press firmly; allow any adhesive to cure per manufacturer instructions

This cover assembly for the air return guides airflow and protects the return opening from debris so the appliance runs more reliably. It restores correct air pathing and helps maintain normal drying/cooling performance. What it does:

• Directs and protects the air return opening to maintain proper airflow
• Helps prevent lint, dust, and debris from entering sensitive internal components
• Can reduce abnormal noise caused by loose or missing return covers
• Restores designed airflow behavior that supports efficient operation

• Disconnect power to the appliance before starting any work
• Remove exterior panels as needed to access the air return and retain fasteners for reassembly
• Inspect surrounding seals and ducts; replace damaged parts to ensure proper airflow

This knurled pin secures the juicer cone and helps transmit torque for proper juicing action. It replaces a worn or damaged roll pin to restore stable cone alignment and smooth operation. What it does:

• Secures the juicer cone or attachment to the drive shaft to prevent slipping
• Transfers rotational force from the motor to the juicer cone
• Helps stop wobble, misalignment, or intermittent engagement of the juicer cone
• Commonly replaced when the pin is bent, worn, or broken

• One knurled pin

• Turn off and unplug the appliance before servicing to avoid shock or injury
• Remove the juicer cone and any retaining parts per the service diagram before replacing the pin
• Use appropriate hand tools; avoid excessive force which can damage the shaft or housing

A small metal clamp that secures the refrigerator's capillary (temperature sensing) tube to the cold control so the thermostat reads temperatures accurately. Replaces worn or missing clamps to keep the sensing tube stable and prevent movement-related issues. What it does:

• Holds the capillary/sensing tube firmly against the cold control or cabinet
• Helps maintain accurate thermostat sensing by preventing tube movement
• Reduces vibration or rattling from a loose sensing tube
• Stops intermittent temperature swings caused by a displaced capillary tube

• Disconnect power before servicing the appliance.
• Handle the capillary tube gently; avoid kinks or sharp bends.
• Install clamp over the tube and secure to the control or bracket using the factory hole or fastener; do not overtighten.

This grommet seals the appliance's fill tube to keep the water path watertight and properly routed. It helps prevent leaks where the fill tube passes through the cabinet or dispenser area. What it does:

• Seals the fill tube connection to stop drips and slow leaks
• Keeps water flowing along the intended path to the dispenser or valve
• Cushions the tube where it passes through panels to reduce wear
• Helps prevent water damage and maintain normal fill operation

• Turn off power and shut off the water supply before servicing
• Access the fill tube area per your model's service instructions; grommet typically presses into an opening and the tube pushes through
• Inspect the tube and surrounding area for damage; replace if cracked or excessively worn
• After installation, restore water and power, then check for leaks during a short fill cycle

This is a replacement hex nut used to secure appliance components and fasteners. It restores a tight, reliable connection where a worn or missing nut causes loose panels, trim, or bracketing. What it does:

• Secures threaded studs, bolts, or fasteners to keep panels and components in place
• Restores proper fastening when original nut is stripped, corroded, or lost
• Helps eliminate rattling, vibration, or loose parts caused by a missing/failed nut
• Compatible with the appliance locations that use a standard hex nut for mounting

• Turn off and unplug the appliance before accessing interior panels or fasteners
• Use the correct wrench or socket size to avoid rounding the nut
• Replace only like-for-like nuts; if thread damage is present, inspect and replace the mating bolt/stud as needed

This ball sleeve guides and supports the valve ball inside the water/dispensing assembly to help maintain a proper seal and smooth movement. Replacing a worn sleeve restores reliable valve operation and reduces intermittent leaks or flow issues. What it does:

• Positions and protects the valve ball for consistent seating and sealing
• Prevents wear between the ball and valve bore to maintain proper flow control
• Helps stop dripping, leaking, or inconsistent dispensing caused by a damaged sleeve
• Works as the mating surface for the ball to ensure smooth operation

• One ball sleeve

• Disconnect power and water supply before starting any repair
• Replace only with the correct part number to ensure proper fit and seal
• Inspect surrounding valve components and seals; replace if worn or damaged
• Test for leaks and proper operation after reassembly